|
7395 Electric Rope Shovel
|
7495 Electric Rope Shovel
|
7495 HD Electric Rope Shovel
|
7295 Electric Rope Shovel
|
Dimensions |
Dipper Payload |
70 t |
120 t |
90 t |
50 t |
Dipper Capacity |
20.6-55.8 m3 (27-73 yd3) |
30.6-62.7 m3 (40-82 yd3) |
27.5-60.4 m3 (36-79 yd3) |
19.1-38.2 m3 (25-50 yd3) |
Note |
Dependent on application and material density. |
Dependent on application and material density |
Dependent on application and material density. |
Dependent on application and material density. |
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified) |
- |
120 t |
- |
- |
Weights |
Working Weight - With Dipper and Standard Links |
2652000 lb |
3066000 lb |
2856700 lb |
1748837 lb |
Ballast - Furnished By Customer |
574000 lb |
667150 lb |
574000 lb |
352000 lb |
Note (1) |
These weights will vary slightly depending upon dipper and optional equipment selection. |
These weights will vary slightly depending upon dipper and optional equipment selection |
These weights will vary slightly depending upon dipper and optional equipment selection. |
These weights will vary slightly depending upon dipper and optional equipment selection. |
Note (2) |
All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads. |
All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers. |
All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. |
All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. |
Main Structures |
Ground Bearing Pressure - 274.3 cm (108 in) Treads |
43 psi |
- |
46 psi |
- |
Planetary Propel |
Dual-motor independent drive. |
Dual-motor independent drive |
Dual-motor independent drive. |
Dual-motor independent drive. |
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard |
32.75 ft |
- |
32.75 ft |
- |
Ground Bearing Pressure - Total Effective Bearing Area (2) |
442 ft² |
- |
442 ft² |
- |
Ground Bearing Pressure |
Ground bearing pressure is dependent upon many factors. |
- |
Ground bearing pressure is dependent upon many factors. |
Ground bearing pressure is dependent upon many factors. |
Ground Bearing Pressure - Total Effective Bearing Area (1) |
343 ft² |
- |
343 ft² |
- |
Upper Works Overall Width - Including Standard Walkways |
44.25 ft |
41.9 ft |
44.25 ft |
41.33 in |
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads |
34.75 ft |
- |
34.75 ft |
- |
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard |
54 psi |
- |
58 psi |
- |
Swing |
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. |
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. |
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. |
Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. |
Hoist |
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. |
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. |
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. |
A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. |
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads |
- |
38 ft |
- |
- |
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard |
- |
36 ft |
- |
- |
Ground Bearing Pressure - Note |
- |
Ground bearing pressure is dependent upon many factors |
- |
- |
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads |
- |
46.6 m2 (298 kPa); 501.7 ft2 (43 psi) |
- |
- |
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard |
- |
36 m2 (382 kPa); 386 ft2 (55 psi) |
- |
- |
Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard |
- |
- |
- |
28.22 in |
Ground Bearing Pressure - 182.9 cm (72 in) Treads |
- |
- |
- |
39 in |
Ground Bearing Pressure - Total Effective Bearing Area |
- |
- |
- |
315.6 ft² |
Optimal Working Ranges* |
Cutting Height - Maximum |
48.75 ft |
- |
48.75 ft |
45 ft |
Dumping Height - With Clearance to Open Dipper Door |
30.84 ft |
- |
30.84 ft |
27.56 ft |
Cutting Radius - Maximum |
74.75 ft |
- |
74.75 ft |
67.59 ft |
Radius of Level Floor |
52.49 ft |
- |
52.49 ft |
48.88 ft |
Revolving Frame Tail Swing Radius |
30.51 ft |
- |
30.51 ft |
25.59 in |
Note (1) |
Optimal working ranges based on loading a Cat® 793F truck. |
- |
Optimal working ranges based on loading a Cat® 793F truck. |
Optimal working ranges based on loading a Cat® 785D truck. |
Note (2) |
*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads. |
- |
*All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. |
*All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. |
Lube System |
Type |
Automatic, single-line system for open gear lubricant and grease. |
Automatic, single-line system for open gear lubricant and grease |
Automatic, single-line system for open gear lubricant and grease. |
Automatic, single-line system for open gear lubricant and grease. |
Components (1) |
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. |
Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room |
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. |
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. |
Components (2) |
External fast fill from lower level. |
External FastFil from lower level |
External fastfill from lower level. |
External fast fill from lower level. |
Electrical |
Drive |
IGBT Acutrol drive system. |
IGBT Acutrol drive system |
IGBT Acutrol drive system. |
IGBT Acutrol drive system. |
Power Requirements - Peak power |
4165 HP |
3778 kW |
4466 HP |
2886 HP |
Power Requirements - Voltage |
3 phase, 50/60 Hz, 7,200V |
3 phase, 50/60 Hz, 7,200V |
3 phase, 50/60 Hz, 7,200V |
3 phase, 50/60 Hz, 7,200V |
Power Requirements - Average Power Demand |
777-1087 kW (1,042-1,458 hp) |
945-1322 kW |
832-1165 kW (1,116-1,562 hp) |
538-753 kW (721-1,010 hp) |
Power Requirements - 60 Hz |
7,200V |
7,200V, 13,800V |
7,200V |
4,160V, 7,200V |
Power Requirements - 50 Hz |
6,000V, 6,600V, 7,200V, 11,000V |
6,000V, 6,600V, 7,200V, 11,000V |
6,000V, 6,600V, 7,200V, 11,000V |
6,000V, 6,600V, 7,200V |
Note |
Other voltages available to suit customer requirements. |
- |
Other voltage options available to suit customer requirements. |
Other voltages available to suit customer requirements. |
Power Requirements - Note |
- |
Other voltage options available to suit customer requirements |
- |
- |
System Voltage - Nominal |
- |
50/60 Hz, 7,200V |
- |
- |
Front End |
Rope Data - Crowd - Diameter |
2.5 in |
- |
2.5 in |
- |
Rope Data - Dipper Trip - Diameter |
0.625 in |
0.75 in |
0.625 in |
- |
Rope Data - Hoist - Diameter |
2.75 in |
2.75 in |
2.75 in |
- |
Rope Data - Boom Suspension - Diameter |
3.25 in |
3.25 in |
3.25 in |
- |
Rope Data - Crowd - No. |
1 |
- |
1 |
- |
Rope Data - Retract - No. |
1 |
- |
1 |
- |
Rope Data - Dipper Trip - No. |
1 |
1 |
1 |
- |
Components |
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
- |
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
Rope Data - Boom Suspension - No. |
4 |
4 |
4 |
- |
Crowd |
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
- |
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
Rope Data - Hoist - No. |
2 |
2 |
2 |
- |
Rope Data - Retract - Diameter |
2.5 in |
- |
2.5 in |
- |
Note |
High impact ropes available as an option |
- |
- |
High impact ropes available as an option |
Type |
- |
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
- |
- |
Rope Data - Note |
- |
High impact ropes available as an option |
High impact ropes available as an option. |
- |
Crowd (1) |
- |
HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft. |
- |
- |
Crowd (2) |
- |
(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
- |
- |
Standard Rope Data - Retract - Diameter |
- |
- |
- |
2.25 in |
Standard Rope Data - Dipper Trip - Diameter |
- |
- |
- |
0.625 in |
Standard Rope Data - Boom Suspension - No. |
- |
- |
- |
4 |
Standard Rope Data - Crowd - No. |
- |
- |
- |
1 |
Standard Rope Data - Boom Suspension - Diameter |
- |
- |
- |
2.75 in |
Standard Rope Data - Retract - No. |
- |
- |
- |
1 |
Standard Rope Data - Hoist - Diameter |
- |
- |
- |
2.375 in |
Standard Rope Data - Crowd - Diameter |
- |
- |
- |
2.25 in |
Standard Rope Data - Dipper Trip - No. |
- |
- |
- |
1 |
Standard Rope Data - Hoist - No. |
- |
- |
- |
2 |
Dimensions - Working Ranges |
Dipper Capacities |
- |
30.6-62.7 m3 (40-82 yd3) |
- |
- |
Maximum Dumping Height |
- |
28.9 ft |
- |
- |
Dipper Payload |
- |
120 ton (US) |
- |
- |
Operating Weight |
- |
3066000 lb |
- |
- |
Dimensions (Approximate) - Optimal Working Ranges* |
Cutting Radius - Maximum |
- |
80 ft |
- |
- |
Revolving Frame Tail Swing Radius |
- |
30.5 ft |
- |
- |
Cutting Height - Maximum |
- |
53.5 ft |
- |
- |
Radius of Level Floor |
- |
56.1 ft |
- |
- |
Dumping Height - With Clearance to Open Dipper Door |
- |
28.9 ft |
- |
- |
Note (1) |
- |
Optimal working ranges based on loading a Cat 795F AC truck. |
- |
- |
Note (2) |
- |
*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers. |
- |
- |