CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    7495 HF Electric Rope Shovel
    View Product
    7495 HD Electric Rope Shovel
    View Product Remove
    7495 Electric Rope Shovel
    View Product Remove

    Dimensions
    Dipper Payload 120 t 90 t 120 t
    Dipper Capacity 30.6-62.7 m3 (40-82 yd3) 27.5-60.4 m3 (36-79 yd3) 30.6-62.7 m3 (40-82 yd3)
    Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified) 120 t - 120 t
    Note Dependent on application and material density Dependent on application and material density. Dependent on application and material density

    Weights
    Working Weight - With Dipper and Standard Links 3155000 lb 2856700 lb 3066000 lb
    Ballast - Furnished By Customer 667150 lb 574000 lb 667150 lb
    Note (1) These weights will vary slightly depending upon dipper and optional equipment selection These weights will vary slightly depending upon dipper and optional equipment selection. These weights will vary slightly depending upon dipper and optional equipment selection
    Note (2) All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers. All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

    Main Structures
    Planetary Propel Dual-motor independent drive Dual-motor independent drive. Dual-motor independent drive
    Ground Bearing Pressure - Total Effective Bearing Area (317.5 cm/125 in) Treads 57 m2 (247 kPa); 614 ft2 (36 psi) - -
    Hoist A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
    Crawler Dimensions - Overall Width 317.5 cm (125 in) Treads 41.67 in - -
    Ground Bearing Pressure - Note Ground bearing pressure is dependent upon many factors - Ground bearing pressure is dependent upon many factors
    Upper Works Overall Width - Including Standard Walkways 41.99 in 44.25 ft 41.9 ft
    Swing Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
    Ground Bearing Pressure - Ground bearing pressure is dependent upon many factors. -
    Ground Bearing Pressure - Total Effective Bearing Area (1) - 343 ft² -
    Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads - 34.75 ft -
    Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard - 58 psi -
    Ground Bearing Pressure - Total Effective Bearing Area (2) - 442 ft² -
    Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard - 32.75 ft -
    Ground Bearing Pressure - 274.3 cm (108 in) Treads - 46 psi -
    Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads - - 38 ft
    Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard - - 36 ft
    Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads - - 46.6 m2 (298 kPa); 501.7 ft2 (43 psi)
    Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard - - 36 m2 (382 kPa); 386 ft2 (55 psi)

    Lube System
    Type Automatic, single-line system for open gear lubricant and grease Automatic, single-line system for open gear lubricant and grease. Automatic, single-line system for open gear lubricant and grease
    Components (1) Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
    Components (2) External fast fill from lower level External fastfill from lower level. External FastFil from lower level

    Electrical
    Power Requirements - Average Power Demand 934-1308 kW 832-1165 kW (1,116-1,562 hp) 945-1322 kW
    Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V, 11,000V 6,000V, 6,600V, 7,200V, 11,000V 6,000V, 6,600V, 7,200V, 11,000V
    Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V
    Drive IGBT Acutrol drive system IGBT Acutrol drive system. IGBT Acutrol drive system
    Power Requirements - 60 Hz 7,200V, 13,800V 7,200V 7,200V, 13,800V
    System Voltage - Nominal 50/60 Hz, 7,200V - 50/60 Hz, 7,200V
    Power Requirements - Peak power 3737 kW 4466 HP 3778 kW
    Note Other voltage options available to suit customer requirements Other voltage options available to suit customer requirements. -
    Power Requirements - Note - - Other voltage options available to suit customer requirements

    Front End
    Rope Data - Dipper Trip - Diameter 0.75 in 0.625 in 0.75 in
    Rope Data - Retract - Diameter 2.5 in 2.5 in -
    Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. -
    Rope Data - Retract - No. 1 1 -
    Rope Data - Boom Suspension - No. 4 4 4
    Rope Data - Crowd - Diameter 2.5 in 2.5 in -
    Rope Data - Note High impact ropes available as an option High impact ropes available as an option. High impact ropes available as an option
    Rope Data - Boom Suspension - Diameter 3.25 in 3.25 in 3.25 in
    Rope Data - Hoist - Diameter 2.75 in 2.75 in 2.75 in
    Rope Data - Crowd - No. 1 1 -
    Rope Data - Hoist - No. 2 2 2
    Rope Data - Dipper Trip - No. 1 1 1
    Crowd (1) Rope Crowd with crowd machinery located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. - HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
    Crowd (2) (Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft. - (Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
    Crowd - Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. -
    Type - - One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.

    Dimensions - Working Ranges
    Maximum Dumping Height 29.53 ft - 28.9 ft
    Dipper Capacities 30.6-62.7 m3 (40-82 yd3) - 30.6-62.7 m3 (40-82 yd3)
    Dipper Payload 120 ton (US) - 120 ton (US)
    Operating Weight 3155000 lb - 3066000 lb

    Dimensions (Approximate) - Optimal Working Ranges*
    Cutting Height - Maximum 55 ft - 53.5 ft
    Cutting Radius - Maximum 79.72 ft - 80 ft
    Radius of Level Floor 55.77 ft - 56.1 ft
    Dumping Height - With Clearance to Open Dipper Door 29.53 ft - 28.9 ft
    Revolving Frame Tail Swing Radius 30.51 ft - 30.5 ft
    Note (1) Optimal working ranges based on loading a Cat 797F truck. - Optimal working ranges based on loading a Cat 795F AC truck.
    Note (2) *All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers. - *All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

    Optimal Working Ranges*
    Radius of Level Floor - 52.49 ft -
    Dumping Height - With Clearance to Open Dipper Door - 30.84 ft -
    Cutting Height - Maximum - 48.75 ft -
    Revolving Frame Tail Swing Radius - 30.51 ft -
    Cutting Radius - Maximum - 74.75 ft -
    Note (1) - Optimal working ranges based on loading a Cat® 793F truck. -
    Note (2) - *All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. -
    Add a Similar Product:
    • 7295 Electric Rope Shovel Add
    • 7395 Electric Rope Shovel Add
    • 7495 HF Electric Rope Shovel Add
    • 7495 Electric Rope Shovel Add