Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)
120 t
-
-
Note
Dependent on application and material density
Dependent on application and material density.
-
Weights
Working Weight - With Dipper and Standard Links
3155000 lb
2856700 lb
-
Ballast - Furnished By Customer
667150 lb
574000 lb
-
Note (1)
These weights will vary slightly depending upon dipper and optional equipment selection
These weights will vary slightly depending upon dipper and optional equipment selection.
-
Note (2)
All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers.
All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.
-
Main Structures
Planetary Propel
Dual-motor independent drive
Dual-motor independent drive.
-
Ground Bearing Pressure - Total Effective Bearing Area (317.5 cm/125 in) Treads
57 m2 (247 kPa); 614 ft2 (36 psi)
-
-
Hoist
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
-
Crawler Dimensions - Overall Width 317.5 cm (125 in) Treads
41.67 in
-
-
Ground Bearing Pressure - Note
Ground bearing pressure is dependent upon many factors
-
-
Upper Works Overall Width - Including Standard Walkways
41.99 in
44.25 ft
-
Swing
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
-
Ground Bearing Pressure
-
Ground bearing pressure is dependent upon many factors.
-
Ground Bearing Pressure - Total Effective Bearing Area (1)
-
343 ft²
-
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads
-
34.75 ft
-
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard
-
58 psi
-
Ground Bearing Pressure - Total Effective Bearing Area (2)
-
442 ft²
-
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard
-
32.75 ft
-
Ground Bearing Pressure - 274.3 cm (108 in) Treads
-
46 psi
-
Lube System
Type
Automatic, single-line system for open gear lubricant and grease
Automatic, single-line system for open gear lubricant and grease.
-
Components (1)
Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
-
Components (2)
External fast fill from lower level
External fastfill from lower level.
-
Electrical
Power Requirements - Average Power Demand
934-1308 kW
832-1165 kW (1,116-1,562 hp)
-
Power Requirements - 50 Hz
6,000V, 6,600V, 7,200V, 11,000V
6,000V, 6,600V, 7,200V, 11,000V
-
Power Requirements - Voltage
3 phase, 50/60 Hz, 7,200V
3 phase, 50/60 Hz, 7,200V
-
Drive
IGBT Acutrol drive system
IGBT Acutrol drive system.
-
Power Requirements - 60 Hz
7,200V, 13,800V
7,200V
-
System Voltage - Nominal
50/60 Hz, 7,200V
-
-
Power Requirements - Peak power
3737 kW
4466 HP
-
Note
Other voltage options available to suit customer requirements
Other voltage options available to suit customer requirements.
-
Front End
Rope Data - Dipper Trip - Diameter
0.75 in
0.625 in
-
Rope Data - Retract - Diameter
2.5 in
2.5 in
-
Components
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
-
Rope Data - Retract - No.
1
1
-
Rope Data - Boom Suspension - No.
4
4
-
Rope Data - Crowd - Diameter
2.5 in
2.5 in
-
Rope Data - Note
High impact ropes available as an option
High impact ropes available as an option.
-
Rope Data - Boom Suspension - Diameter
3.25 in
3.25 in
-
Rope Data - Hoist - Diameter
2.75 in
2.75 in
-
Rope Data - Crowd - No.
1
1
-
Rope Data - Hoist - No.
2
2
-
Rope Data - Dipper Trip - No.
1
1
-
Crowd (1)
Rope Crowd with crowd machinery located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
-
-
Crowd (2)
(Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
-
-
Crowd
-
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
-
Dimensions - Working Ranges
Maximum Dumping Height
29.53 ft
-
-
Dipper Capacities
30.6-62.7 m3 (40-82 yd3)
-
-
Dipper Payload
120 ton (US)
-
-
Operating Weight
3155000 lb
-
-
Dimensions (Approximate) - Optimal Working Ranges*
Cutting Height - Maximum
55 ft
-
-
Cutting Radius - Maximum
79.72 ft
-
-
Radius of Level Floor
55.77 ft
-
-
Dumping Height - With Clearance to Open Dipper Door
29.53 ft
-
-
Revolving Frame Tail Swing Radius
30.51 ft
-
-
Note (1)
Optimal working ranges based on loading a Cat 797F truck.
-
-
Note (2)
*All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers.
-
-
Optimal Working Ranges*
Radius of Level Floor
-
52.49 ft
-
Dumping Height - With Clearance to Open Dipper Door
-
30.84 ft
-
Cutting Height - Maximum
-
48.75 ft
-
Revolving Frame Tail Swing Radius
-
30.51 ft
-
Cutting Radius - Maximum
-
74.75 ft
-
Note (1)
-
Optimal working ranges based on loading a Cat® 793F truck.
-
Note (2)
-
*All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.