Compare

Compare Equipment Go Back

Cutting System
	PM313 Track Undercarriage Cold Planer View Product	PM825 Cold Planer View Product Remove	PM312 Track Undercarriage Cold Planer View Product Remove
Milling Width	51.2 in	98.6 in	48.2 in
Maximum Milling Depth	13 in	13 in	13 in
Rotor Speeds	97 / 109 / 121 rpm	100 / 109 / 118 rpm	97 / 109 / 121 rpm
Number of Bits	111	203	106
Power Train
Rated Power	343 hp	806 hp	343 hp
Engine	C9.3B	Cat C18 twin-turbo	C9.3B
Maximum Travel Speed	3.4 mile/h	3.7 mile/h	3.4 mile/h
Maximum Milling Speed	108 ft/min	328 ft/min	108 ft/min
Weights
Operating Weight	47522 lb	82673 lb	47407 lb
Transport Weight	46622 lb	74075 lb	46506 lb
Dimensions
Operating Length - Conveyor Up	36.45 ft	47.64 ft	36.45 ft
Operating Width	8.33 ft	11.02 ft	8.33 ft
Height - Canopy	12.3 ft	13.29 ft	12.3 ft
Maximum Truck Clearance	15.42 ft	15.94 ft	15.42 ft
Minimum Right Cutting Radius	6.3 ft	4.92 ft	6.3 ft
Minimum Left Cutting Radius	13.58 ft	6.56 ft	13.58 ft
Conveyor Swing	±60 degrees from center	60 degrees from center	±60 degrees from center
Transport Length	30.58 ft	40.78 ft	30.58 ft
Transport Width	8.33 lb/in	9.88 ft	8.33 lb/in
Transport Height	9.84 ft	9.84 ft	9.84 ft
Service Refill Capacities
Fuel Tank	137.9 gal (US)	292.7 gal (US)	137.9 gal (US)
Engine Oil	7.9 gal (US)	17.2 gal (US)	7.9 gal (US)
Hydraulic Tank	14.5 gal (US)	29.9 gal (US)	14.5 gal (US)
Cooling System	16.9 gal (US)	27.5 gal (US)	16.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank	12.4 gal (US)	-	12.4 gal (US)
Water Spray System Tank	332.9 gal (US)	898.2 gal (US)	332.9 gal (US)