PM825 Cold Planer
Product description
The PM825 is a high-production, half-lane milling machine with a cutting width of 2505 mm (98.6 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.
Cutting System
- Milling Width - 98.6in
- Maximum Milling Depth - 13in
- Rotor Speeds - 100 / 109 / 118 rpm
- Number of Bits - 203
Power Train
- Rated Power - 806HP
- Engine - Cat C18 twin-turbo
- Maximum Travel Speed - 3.7mile/h
- Maximum Milling Speed - 328ft/min
Weights
- Operating Weight - 82673lb
- Transport Weight - 74075lb
Dimensions
- Operating Length - Conveyor Up - 47.64ft
- Operating Width - 11.02ft
- Height - Canopy - 13.29ft
- Maximum Truck Clearance - 15.94ft
- Minimum Right Cutting Radius - 4.92ft
- Minimum Left Cutting Radius - 6.56ft
- Conveyor Swing - 60 degrees from center
- Transport Length - 40.78ft
- Transport Width - 9.88ft
- Transport Height - 9.84ft
Service Refill Capacities
- Water Spray System Tank - 898.2gal (US)
- Cooling System - 27.5gal (US)
- Fuel Tank - 292.7gal (US)
- Engine Oil - 17.2gal (US)
- Hydraulic Tank - 29.9gal (US)
Standard Equipment:
-
- Operator Environment
-
- Ground control keypads
- Single high-resolution LCD touchscreen display
- 12-volt power receptacle
-
- Cat Connect Technology
-
- Cat Product Link
- Cat GRADE
-
- Conveyor
-
- Grease tensioner
- Material removal boost feature
-
- Rotor System
-
- Automatic plunge-cut
- Automatic transition feature
- Obstacle jump
- Three cutting speeds
-
- Powertrain
-
- Auto engine idle control
- High capacity cooling system
- Dual propel pumps
- Automatic load control
-
- Hydraulic System
-
- Dual pump hydraulic propel system
- Traction control
-
- Service And Maintenance
-
- Sampling ports for Scheduled Oil Sampling (S·O·S℠)
- Power hood
- Platform-level engine oil dipsticks
- Rotor chamber water spray system
- Air compressor
- Accessory drive system
- 3400 L (898 gal) onboard water tank
- Side water fill valve
-
- Safety And Security
-
- Platform handrails
- Signaling/warning horn
- Wide-dispersion LED work lights
Optional Equipment:
-
- Operator Environment
-
- Dual high-resolution LCD touchscreen displays
- Hydraulically folding canopy with LEDs
- Air-ride suspension seats
- Windscreens
-
- Cat Connect Technology
-
- Inboard ski
- Sonic sensor (averaging or string line)
- Ground level grade controls and displays
-
- Conveyor
-
- Dust abatement system
- Remote camera (loading conveyor)
-
- Rotor System
-
- System K Rotor - Course (25 mm)
- System K Rotor - Course (18 mm)
- System K Rotor - Standard (15 mm)
- System K Rotor - Fine (8 mm)
- System K Rotor - Micro (6 mm)
- Diamond bits
- Bit bucket trays
- Pneumatic bit removal tool
- Tool holder extractor
- Rotor turning device with pendant control
-
- Powertrain
-
- CE certificate
-
- Hydraulic System
-
- Water tank transfer pump
- Fuel transfer pump
-
- Service And Maintenance
-
- High pressure washdown
- Low pressure washdown
- Additional spray bars
-
- Safety And Security
-
- Perimeter LED strip lights
- Magnetic LED work light
- Warning beacon (fixed or magnetic mount)
- Truck signal lights
- Remote camera (rear, front, magnetic mount)
