Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
-
Note (2)
The following engine configurations are available: – Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. – Noncertified that emits equivalent to U.S. EPA Tier 3.
Net torque rise meets SAE J139.
-
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
-
907 hp
-
Emissions (Tier 2 Equivalent): Net Power ISO - 9249
-
823 hp
-
Peak Torque - 1,200 rpm
-
3139 lb/ft
-
Note (3)
-
No engine derating required up to 3050 m (10,000 ft) altitude.
-
Operating Specifications
Operating Weight
105271 lb
224647 lb
-
Blade Capacities
7.9 – 22.2 m3 (10.3 – 29.0 yd3)
-
-
Transmission
Transmission Type
Cat planetary power shift
Cat Planetary Power Shift
-
Forward - 1
4.2 mile/h
-
-
Forward - 2
7.2 mile/h
-
-
Forward - 3
12.6 mile/h
-
-
Forward - 4
22 mile/h
-
-
Reverse - 1
4.2 mile/h
-
-
Reverse - 2
7.6 mile/h
-
-
Reverse - 3
13.3 mile/h
-
-
Direct Drive - Forward 1
Lock-up disabled
Lock-up disabled
-
Direct Drive - Forward 2
7.7 mile/h
8.1 mile/h
-
Direct Drive - Forward 3
13.7 mile/h
14.2 mile/h
-
Direct Drive - Forward 4
23.9 mile/h
-
-
Direct Drive - Reverse 1
4.5 mile/h
5 mile/h
-
Direct Drive - Reverse 2
8.1 mile/h
8.9 mile/h
-
Direct Drive - Reverse 3
14.3 mile/h
15.6 mile/h
-
Note
Travel speeds based on 35/65-R33 tire
Travel speeds based on 45/65-45 L-5 46 ply tires.
-
Converter Drive - Forward 1
-
4.4 mile/h
-
Converter Drive - Forward 2
-
7.7 mile/h
-
Converter Drive - Forward 3
-
13.2 mile/h
-
Converter Drive - Reverse 1
-
4.8 mile/h
-
Converter Drive - Reverse 2
-
8.4 mile/h
-
Converter Drive - Reverse 3
-
14.6 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Pilot operated LS valve with EH
-
-
Lift/Tilt System
Variable displacement piston
-
-
Maximum Flow at 1,900 rpm
153 gal/min
-
-
Relief Valve Setting - Lift/Tilt
4641 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
139.75 mm × 1021 mm (5.5 in × 40.2 in)
177 mm × 1760 mm (0.58 ft × 5.8 ft)
-
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke
140 mm × 230 mm (5.5 in × 9.1 in)
-
-
Pilot System
Variable displacement piston
-
-
Pilot Maximum Flow
13.7 gal/min
-
-
Pilot Relief Valve Setting
580 psi
-
-
Output at 1,850 rpm and 6900 kPa (1,000 psi)
-
161 gal/min
-
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
-
267 mm × 286 mm (0.88 ft × 0.94 ft)
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
Pilot, load sensing
-
Steering System - Pump
Piston, variable displacement
Piston, variable displacement
-
Maximum Flow
65.8 gal/min
-
-
Relief Valve Setting - Steering
3495 psi
-
-
Total Steering Angle
86 °
86 degrees
-
Steering Cycle Times - High Idle
3.1 s
-
-
Steering Cycle Times - Low Idle
5.7 s
-
-
Minimum Turning Radius - Over Blade
-
31 ft
-
Relief Valve Setting
-
5004 psi
-
Service Refill Capacities
Fuel Tank
209.5 gal (US)
-
-
Cooling System
31.7 gal (US)
53 gal (US)
-
Crankcase
15.9 gal (US)
32 gal (US)
-
Diesel Exhaust Fluid Tank
8.7 gal (US)
-
-
Transmission
31.7 gal (US)
45 gal (US)
-
Hydraulic System Factory Fill
63.4 gal (US)
-
-
Differential - Final Drives - Front
49.1 gal (US)
98 gal (US)
-
Differential - Final Drives - Rear
49.1 gal (US)
90 gal (US)
-
Hydraulic System - Tank Only
37 gal (US)
-
-
Note (1)
All non-road Tier 4 Final/Stage V diesel engines are required to use: – ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este
- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo
-
Fuel Tank - Standard
-
413 gal (US)
-
Hydraulic System - Steering and Engine Cooling Fan - Tank Only
-
77 gal (US)
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). See the label or instruction manual for identification of the gas. If equipped with 1234yf (Global Warming Potential =
-
Axles
Front
Fixed
Fixed
-
Rear
Trunnion
Trunnion
-
Oscillation Angle
±13°
-
-
Brakes
Brakes
ISO 3450: 2011
Meets ISO 3540:2011
-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)**
109 dB(A)
-
-
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
-
-
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
-
-
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
-
-
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
-
-
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
-
-
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Dimensions
Height - Top of Exhaust Stack
15.9 ft
-
-
Height - Top of Air Cleaner
12.8 ft
-
-
Height - Top of Hood
10.9 ft
-
-
Ground Clearance - Bumper
3.1 ft
-
-
Centerline of Rear Axle to Edge of Bumper
10.5 ft
-
-
Wheel Base
14.9 ft
-
-
Length - Front of Tire
28.4 ft
-
-
Length - Straight Blade on Ground
32.6 ft
-
-
Length - Universal Blade on Ground
34.4 ft
-
-
Centerline of Front Axle to Hitch
7.5 ft
-
-
Ground Clearance
1.7 ft
-
-
Height - Top of Cab
13.7 ft
-
-
Weights
Operating Weight
-
224647 lb
-
Blades
Blade Capacities
-
30.5 to 44.8 m3 (40 to 58.6 yd3)
-
Dimensions (Approximate)
Height - Top of ROPS
-
18.25 ft
-
Height - Top of Exhaust Pipe
-
17.17 ft
-
Height - Top of Hood
-
13 ft
-
Ground Clearance
-
27 in
-
Centerline of Front Axle to Hitch
-
9.67 ft
-
Centerline of Rear Axle to Edge of Bumper
-
13.75 ft
-
Wheel Base
-
19.25 ft
-
Length - With Blade on Ground
-
44 ft
-
Sound Performance Levels
Sound Performance
-
• The machine sound power level was measured according to
ISO 6395:2008. The measurement was conducted at 70 percent
of the maximum engine cooling fan speed.
• The operator sound pressure level was measured according to
ISO 6396:2008. The measurement was
-
Cab
ROPS/FOPS
-
ISO 3471:2008 and ISO 3449:2005 Level II Standards
