Engine

• Engine Model - Cat® C18 
• Net Power - SAE J1349:2011 - 496hp
• Rated Speed - 1900r/min
• Peak Power Speed - 1500r/min
• Gross Power - SAE J1995:2014 - 562hp
• Bore - 5.7in
• Stroke - 7.2in
• Displacement - 1105in³
• Peak Torque - 1,300 rpm - 2092lb/ft
• Torque Rise - 52%
• Note (1) - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
• Note (2) - The following engine configurations are available: – Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. – Noncertified that emits equivalent to U.S. EPA Tier 3.

Operating Specifications

• Operating Weight - 105271lb
• Blade Capacities - 7.9 – 22.2 m3 (10.3 – 29.0 yd3)

Transmission

• Transmission Type - Cat planetary power shift
• Forward - 1 - 4.2mile/h
• Forward - 2 - 7.2mile/h
• Forward - 3 - 12.6mile/h
• Forward - 4 - 22mile/h
• Reverse - 1 - 4.2mile/h
• Reverse - 2 - 7.6mile/h
• Reverse - 3 - 13.3mile/h
• Direct Drive - Forward 1 - Lock-up disabled
• Direct Drive - Forward 2 - 7.7mile/h
• Direct Drive - Forward 3 - 13.7mile/h
• Direct Drive - Forward 4 - 23.9mile/h
• Direct Drive - Reverse 1 - 4.5mile/h
• Direct Drive - Reverse 2 - 8.1mile/h
• Direct Drive - Reverse 3 - 14.3mile/h
• Note - Travel speeds based on 35/65-R33 tire

Hydraulic System - Lift/Tilt

• Lift/Tilt System - Circuit - Pilot operated LS valve with EH
• Lift/Tilt System - Variable displacement piston
• Maximum Flow at 1,900 rpm - 153gal/min
• Relief Valve Setting - Lift/Tilt - 4641psi
• Cylinders, Double Acting - Lift, Bore and Stroke - 139.75 mm × 1021 mm (5.5 in × 40.2 in)
• Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 140 mm × 230 mm (5.5 in × 9.1 in)
• Pilot System - Variable displacement piston
• Pilot Maximum Flow - 13.7gal/min
• Pilot Relief Valve Setting - 580psi

Hydraulic System - Steering

• Steering System - Circuit - Pilot, load sensing
• Steering System - Pump - Piston, variable displacement
• Maximum Flow - 65.8gal/min
• Relief Valve Setting - Steering - 3495psi
• Total Steering Angle - 86°
• Steering Cycle Times - High Idle - 3.1s
• Steering Cycle Times - Low Idle - 5.7s

Service Refill Capacities

• Fuel Tank - 209.5gal (US)
• Cooling System - 31.7gal (US)
• Crankcase - 15.9gal (US)
• Diesel Exhaust Fluid Tank - 8.7gal (US)
• Transmission - 31.7gal (US)
• Hydraulic System Factory Fill - 63.4gal (US)
• Differential - Final Drives - Front - 49.1gal (US)
• Differential - Final Drives - Rear - 49.1gal (US)
• Hydraulic System - Tank Only - 37gal (US)
• Note (1) - All non-road Tier 4 Final/Stage V diesel engines are required to use: – ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este

Air Conditioning System

• Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co

Axles

• Front - Fixed
• Rear - Trunnion
• Oscillation Angle - ±13°

Brakes

• Brakes - ISO 3450: 2011

Sound Performance - Tier 4 Final / Stage V

• Operator Sound Pressure Level (ISO 6396:2008) - 72dB(A)
• Machine Sound Power Level (ISO 6395:2008) - 113dB(A)
• Operator Sound Pressure Level (ISO 6396:2008)* - 72dB(A)
• Machine Sound Power Level (ISO 6395:2008)** - 109dB(A)
• Note (1) - * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
• Note (2) - ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
• Note (3) - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
• Note (4) - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
• Note (5) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Sound Performance - Tier 3 / Stage IIIA

• Operator Sound Pressure Level (ISO 6396:2008) - 72dB(A)
• Machine Sound Power Level (ISO 6395:2008) - 113dB(A)
• Operator Sound Pressure Level (ISO 6396:2008)* - 72dB(A)
• Machine Sound Power Level (ISO 6395:2008)** - 110dB(A)
• Note (1) - * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
• Note (2) - ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
• Note (3) - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
• Note (4) - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
• Note (5) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Dimensions

• Height - Top of Exhaust Stack - 15.9ft
• Height - Top of Air Cleaner - 12.8ft
• Height - Top of Hood - 10.9ft
• Ground Clearance - Bumper - 3.1ft
• Centerline of Rear Axle to Edge of Bumper - 10.5ft
• Wheel Base - 14.9ft
• Length - Front of Tire - 28.4ft
• Length - Straight Blade on Ground - 32.6ft
• Length - Universal Blade on Ground - 34.4ft
• Centerline of Front Axle to Hitch - 7.5ft
• Ground Clearance - 1.7ft
• Height - Top of Cab - 13.7ft