U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II
-
-
Bore
5.7 in
-
-
Stroke
7.2 in
-
-
Displacement
1105 in³
12.5L
-
Peak Torque - 1,200 rpm
2230 lb/ft
-
-
Torque Rise
58 %
-
-
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
-
404 HP
-
Note (1)
-
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
-
Note (2)
-
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
Engine Power @ 1,700 rpm – ISO 14396:2002
-
432 HP
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
-
1636 lb/ft
-
Gross Power @ 1,700 rpm – SAE J1995:2014
-
436 HP
-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
-
1515 lb/ft
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
-
1620 lb/ft
-
Note (3)
-
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
Operating Specifications
Operating Weight
112574 lb
-
-
Rated Payload - Quarry Face
12.5 t
-
-
Rated Payload - Loose Material
16 t
-
-
Bucket Capacity Range
4.7-13 m3 (6.2-17 yd3)
-
-
Cat Truck Match - Standard
770～772
-
-
Cat Truck Match - High Lift
773～775
-
-
Breakout Force
-
59060 lbf
-
Note (1)
-
For a machine configuration as defined under Weight.
-
Note (2)
-
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
-
22418 kg
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
-
46526 lb
-
Transmission
Transmission Type
Cat planetary powershift
-
-
Forward - 1
4 mile/h
3.9 mile/h
-
Forward - 2
7.2 mile/h
7.3 mile/h
-
Forward - 3
12.7 mile/h
13 mile/h
-
Forward - 4
21.6 mile/h
24.5 mile/h
-
Reverse - 1
4.7 mile/h
4.4 mile/h
-
Reverse - 2
8.3 mile/h
8.4 mile/h
-
Reverse - 3
14.4 mile/h
17.4 mile/h
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
7.8 mile/h
-
-
Direct Drive - Forward 3
13.9 mile/h
-
-
Direct Drive - Forward 4
24.4 mile/h
-
-
Direct Drive - Reverse 1
5 mile/h
-
-
Direct Drive - Reverse 2
8.9 mile/h
-
-
Direct Drive - Reverse 3
15.8 mile/h
-
-
Note
-
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
EH- Positive Flow Control, Flow Sharing
-
-
Lift/Tilt System
Variable displacement piston
-
-
Maximum Flow at 1,400-1,860 rpm
153 gal/min
-
-
Relief Valve Setting - Lift/Tilt
4757 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
210 mm × 1050 mm (8.7 in × 41.3 in)
-
-
Cylinders, Double Acting - Tilt, Bore and Stroke
269 mm × 685 mm (8.7 in × 27 in)
-
-
Pilot System
Variable displacement piston
-
-
Relief Valve Setting - Main
551 psi
-
-
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back
4.5 s
-
-
Raise
8 s
-
-
Dump
2.2 s
-
-
Lower Float Down
3.5 s
-
-
Total Hydraulic Cycle Time - Empty Bucket
18.2 s
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
-
-
Steering System - Pump
Piston, variable displacement
-
-
Maximum Flow
71.3 gal/min
-
-
Relief Valve Setting - Steering
4351 psi
-
-
Total Steering Angle
86 °
-
-
Steering Cycle Times - High Idle
3.4 s
-
-
Steering Cycle Times - Low Idle
5.6 s
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
-
Axles
Front
Fixed
-
-
Rear
Trunnion
-
-
Oscillation Angle
13 °
-
-
Brakes
Brakes
ISO 3450:2011
-
-
Operator's Cab
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
-
Service Refill Capacities
Fuel Tank
188 gal (US)
112.5 gal (US)
-
Cooling System
31.7 gal (US)
13.7 gal (US)
-
Coolant (Validated by Test Cell Fill Quantities)
33 gal (US)
-
-
Crankcase
15.9 gal (US)
9.8 gal (US)
-
Diesel Exhaust Fluid Tank
8.7 gal (US)
-
-
Transmission
31.7 gal (US)
20.3 gal (US)
-
Transmission - Validated by Test Cell Fill Quantities
29 gal (US)
-
-
Differential - Final Drives - Front
49.1 gal (US)
24.3 gal (US)
-
Differential - Final Drives - Rear
49.1 gal (US)
24.3 gal (US)
-
Hydraulic System Factory Fill
125.5 gal (US)
-
-
Hydraulic System - Tank Only
63.4 gal (US)
-
-
DEF Tank
-
5.5 gal (US)
-
Hydraulic Tank
-
40.4 gal (US)
-
Sound Performance - Tier 4 Final / Stage V - Standard
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
111 dB(A)
-
-
Sound Performance - Tier 3 / Stage III - Standard
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
112 dB(A)
-
-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
13.8 ft
-
-
Ground to Top of Exhaust Stacks
14.8 ft
-
-
Ground to Top of Hood
10.9 ft
-
-
Rear Axle - Centerline to Bumper
10.5 ft
-
-
Front Axle Centerline to Bucket Tip
14 ft
-
-
Wheel Base
14.9 ft
-
-
Maximum Overall Length
39.3 ft
-
-
Ground to Lower Hitch Clearance
1.9 ft
-
-
Clearance at Maximum Lift
11.9 ft
-
-
B-Pin Height - Maximum Lift
18 ft
-
-
Maximum Overall Height - Bucket Raised
24.5 ft
-
-
Reach - Maximum Lift
6.5 ft
-
-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
13.8 ft
-
-
Ground to Top of Exhaust Stacks
14.8 ft
-
-
Ground to Top of Hood
10.9 ft
-
-
Rear Axle - Centerline to Bumper
10.5 ft
-
-
Front Axle Centerline to Bucket Tip
15.3 ft
-
-
Wheel Base
14.9 ft
-
-
Maximum Overall Length
40.7 ft
-
-
Ground to Lower Hitch Clearance
1.9 ft
-
-
Clearance at Maximum Lift
13.3 ft
-
-
B-Pin Height - Maximum Lift
19.3 ft
-
-
Maximum Overall Height - Bucket Raised
25.8 ft
-
-
Reach - Maximum Lift
6.8 ft
-
-
Buckets
Bucket Capacities
4.7-13 m3 (6.2-17 yd3)
-
-
Weights
Operating Weight
-
78264 lb
-
Note
-
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
-
Bucket Capacities
Bucket Range
-
4.8-17.2 m³ 6.25-22.5 yd³
-
Sound
Note (1)
-
* For machines in European Union countries and in countries that adopt the “EU Directives.”
-
Note (2)
-
European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
-
107
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
-
70 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
-
110 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
-
75
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
-
70 dB(A)
-
Hydraulic System
Implement System - Maximum Operating Pressure
-
4975 psi
-
Implement System - Maximum Pump Output at 2,250 rpm
-
119 gal/min
-
Hydraulic Cycle Time - Total
-
10.1 seconds
-
Dimensions
Note
-
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
