Compare Equipment Go Back
 770 Off-Highway Truck |
 6060 Hydraulic Mining Shovel |
 789 Next Generation |
 772G Off-Highway Truck Bare Chassis |
|
Operating Specifications |
||||
|---|---|---|---|---|
| Nominal Payload Class (100%) | 42.1 ton (US) | - | - | - |
| Top Speed - Loaded | 45.8 mile/h | - | - | - |
| Target Payload (100%) | 42.1 ton (US) | - | - | - |
| Maximum Working Payload (110%) | 46.3 ton (US) | - | - | - |
| Maximum Allowable Payload (120%)* | 50.5 ton (US) | - | - | - |
| Body Capacity - SAE 2:1 | 32.9 yd³ | - | - | - |
| Note (1) | *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. | - | - | - |
| Note (2) | Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight. | - | - | - |
| Nominal Water Tank Capacity | - | - | - | 11000 gal (US) |
Engine |
||||
| Engine Model | Cat® C15 | 2 x Cat 3512E | Cat® 3516E | Cat® C18 |
| Rated Engine Speed | 1700 r/min | - | - | 1700 r/min |
| Gross Power - SAE J1995:2014 | 515 hp | - | 2100 hp | - |
| Net Power - SAE J1349:2011 | 477 hp | - | 1975 hp | - |
| Net Power - ISO 9249 | 477 hp | - | - | - |
| Net Power - 80/1269/EEC | 489 hp | - | - | - |
| Net Power - ISO 14396 | 508 hp | - | - | - |
| Net Torque - SAE J1349 | 1834 ft·lbf | - | - | - |
| Number of Cylinders | 6 | - | - | 6 |
| Bore | 5.4 in | - | 6.7 in | 5.7 in |
| Stroke | 6.7 in | - | 8.5 in | 7.2 in |
| Displacement | 927.6 in³ | - | 4766 in³ | 1105 in³ |
| Note (1) | Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard. | - | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). | - | Optional 1417 kW / 1,900 HP engine rating. | - |
| Note (3) | No engine derating required up to 3000 m (9,843 ft) altitude. | - | U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets. | - |
| Note (4) | Meets Japan Small Volume Exemption. | - | - | - |
| Emissions | Meets U.S. EPA Tier 4 and EU Stage V emission standards. | - | - | - |
| Rated Speed | - | - | 1650 r/min | - |
| Emissions Rating | - | - | Fuel Optimized | - |
| Gross Power - SAE J1995 | - | - | - | 605 hp |
| Rated Net Power - SAE J1349 | - | - | - | 550 hp |
| Note | - | - | - | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
Weights - Approximate |
||||
| Target Gross Machine Operating Weight | 157000 lb | - | - | - |
| Target Gross Machine Weight | 157000 lb | - | - | - |
| Chassis Weight | 55948 lb | - | - | - |
| Body Weight | 17306 lb | - | 60406 lb | - |
| Note (1) | Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. | - | Consult your tire manufacturer for maximum tire load | - |
| Note (2) | Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. | - | Chassis weight with full fuel and fluids, standard and mandatory attachments, hoist, body mounting group, rims, and tires. | - |
| Nominal Rated Payload | - | - | 213 ton (US) | - |
| Rated Gross Machine Weight | - | - | 715000 lb | - |
Transmission |
||||
| Forward - 1 | 7.4 mile/h | - | 7.8 mile/h | 8 mile/h |
| Forward - 2 | 10.1 mile/h | - | 10.6 mile/h | 10.9 mile/h |
| Forward - 3 | 13.8 mile/h | - | 14.4 mile/h | 14.8 mile/h |
| Forward - 4 | 18.5 mile/h | - | 19.4 mile/h | 19.8 mile/h |
| Forward - 5 | 25.1 mile/h | - | 26.3 mile/h | 26.9 mile/h |
| Forward - 6 | 33.8 mile/h | - | 35.5 mile/h | 36.2 mile/h |
| Forward - 7 | 45.8 mile/h | - | - | 49.2 mile/h |
| Reverse | 8.8 mile/h | - | 7.3 mile/h | 10.4 mile/h |
| Note | Maximum travel speeds with standard 18.00R33 (E4) tires. | - | - | Maximum travel speeds with standard 21.00R33 (E4) tires. |
| Top Speed - Loaded | - | - | 35.5 mile/h | - |
Final Drives |
||||
| Differential Ratio | 1.92:1 | - | 2.35:1 | - |
| Planetary Ratio | 4.80:1 | - | 10.83:1 | - |
| Total Reduction Ratio | 9.26:1 | - | 25.46:1 | - |
| Type | - | - | Double reduction, planetary with full floating axles | - |
Brakes |
||||
| Brake Surface - Front | 216 in² | - | - | 216 in² |
| Brake Surface - Rear | 6235 in² | - | - | 7794 in² |
| Brake Standards | ISO 3450:2011 | - | - | - |
| Note | Target gross machine operating weight is 71 214 kg (157,000 lb). | - | - | - |
Body Hoists |
||||
| Pump Flow - High Idle | 118 gal/min | - | 106.5 gal/min | - |
| Relief Valve Setting - Raise | 2750 psi | - | 2749 psi | - |
| Relief Valve Setting - Lower | 500 psi | - | - | - |
| Body Raise Time - High Idle | 7.5 s | - | 14 s | - |
| Body Lower Time - Float | 10 s | - | 16 s | - |
| Body Power Down - High Idle | 10 s | - | - | - |
| Type | - | - | Twin, two-stage hydraulic cylinders with snubbing valve. | - |
Capacity - Dual Slope - 100% Fill Factor |
||||
| Struck | 23.01 yd³ | - | - | - |
| Heaped (SAE 2:1)* | 32.9 yd³ | - | - | - |
| Note (2) | *ISO 6483:1980. | - | - | - |
| Note (1) | Contact your local Cat dealer for body recommendation. | - | - | - |
Capacity - Flat Floor - 100% Fill Factor |
||||
| Struck | 23.01 yd³ | - | - | - |
| Heaped (SAE 2:1)* | 32.9 yd³ | - | - | - |
| Note (1) | Contact your local Cat dealer for body recommendation. | - | - | - |
| Note (2) | *ISO 6483:1980. | - | - | - |
Weight Distributions - Approximate |
||||
| Front Axle - Empty | 49 % | - | 50% | - |
| Front Axle - Loaded | 34 % | - | 33% | - |
| Rear Axle - Empty | 51 % | - | 50% | - |
| Rear Axle - Loaded | 66 % | - | 67% | - |
Suspension |
||||
| Empty Loaded Cylinder Stroke Front | 9.2 in | - | - | - |
| Empty Loaded Cylinder Stroke Rear | 5.9 in | - | - | - |
| Rear axle - Oscillation | 8.9 ° | - | +/- 5 degrees | - |
| Type | - | - | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments | - |
| Effective Cylinder Stroke - Front | - | - | 4.12 in | - |
| Effective Cylinder Stroke - Rear | - | - | 3.67 in | - |
Service Refill Capacities |
||||
| Fuel Tank | 140 gal (US) | 3136 gal (US) | 1000 gal (US) | - |
| Cooling System | 33 gal (US) | 211.4 gal (US) | 180 gal (US) | 33 gal (US) |
| Crankcase | 17 gal (US) | - | 77 gal (US) | 17 gal (US) |
| Differential - Final Drives | 47 gal (US) | - | - | 47 gal (US) |
| Steering Tank | 14.5 gal (US) | - | - | - |
| Steering System - Including Tank | 23 gal (US) | - | - | 60 gal (US) |
| Brake/Hoist Hydraulic Tank | 38 gal (US) | - | - | 38 gal (US) |
| Brake Hoist System | 60 gal (US) | - | 169 gal (US) | 60 gal (US) |
| Torque Converter - Transmission System | 17 gal (US) | - | - | 17 gal (US) |
| DEF Tank | 6 gal (US) | - | - | - |
| Hydraulic Tank | - | 1876 gal (US) | - | - |
| Hydraulic System - Including Tank | - | 2483 gal (US) | - | - |
| Engine Oil | - | 86.6 gal (US) | - | - |
| Swing Drive | - | 42.4 gal (US) | - | - |
| Grease Tank | - | 188 gal (US) | - | - |
| Fuel Tank - Standard | - | - | 550 gal (US) | - |
| Fuel Tank (Tier 4) | - | - | 55 gal (US) | - |
| Diesel Exhaust Fluid Tank | - | - | 62 gal (US) | - |
| Front Wheels - Each | - | - | 5.8 gal (US) | - |
| Differentials | - | - | 161 gal (US) | - |
| Steering System | - | - | 42 gal (US) | - |
| Steering System - Includes Tank | - | - | 46 gal (US) | - |
| Brake Hoist System - Includes Tank | - | - | 347 gal (US) | - |
| Torque Converter - Transmission System - Including Sump | - | - | 55 gal (US) | - |
| Fuel Tank Capacity | - | - | - | 140 gal (US) |
Steering |
||||
| Steering Standards | ISO 5010:2007 | - | ISO 5010:2019 | ISO 5010:2007 |
| Steer Angle | 40.5 ° | - | 36.07 ° | 31 ° |
| Turning Diameter - Front | 57.7 ft | - | - | - |
| Turning Circle - Clearance Diameter | 66.6 ft | - | - | 66.6 ft |
| Note | Target gross machine operating weight is 71 214 kg (157,000 lb). | - | - | - |
| Turning Diameter | - | - | - | 57.7 ft |
Tires |
||||
| Standard Tire | 18.00R33 (E4) | - | - | - |
| Note (1) | Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. | - | Quick Change Rims optional | - |
| Note (2) | Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. | - | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | - |
| Standard Tires | - | - | 37 R57 | - |
| Optional Tires | - | - | 40 R57 | - |
| Optional Tire | - | - | 42/90 R57 | - |
| Rims | - | - | 29” x 57” Rims | - |
ROPS |
||||
| ROPS Standards | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. | - | - | - |
| FOPS Standards | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. | - | - | - |
| Tractor ROPS | - | - | - | 77430 lb |
Sound |
||||
| Sound Standards (1) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. | - | Operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008. | - |
| Sound Standards (2) | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). | - | - | - |
| Sound Standards (3) | Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. | - | - | - |
Dimensions |
||||
| Height - Top of ROPS | 12.7 ft | - | - | - |
| Overall Body Length | 26.8 ft | - | - | - |
| Inside Body Length | 18.5 ft | - | - | - |
| Overall Length | 28.9 ft | - | - | - |
| Wheel Base | 13 ft | - | - | - |
| Rear Axle - Tail | 8.5 ft | - | - | - |
| Ground Clearance | 1.6 ft | - | - | - |
| Dump Clearance | 1.7 ft | - | - | - |
| Loading Height - Empty | 10.3 ft | - | - | - |
| Inside Body Depth - Maximum | 4.6 ft | - | - | - |
| Overall Height - Body Raised | 27.1 ft | - | - | - |
| Operating Width | 15.7 ft | - | - | - |
| Centerline Front Tire Width | 10.2 ft | - | - | - |
| Engine Guard Clearance | 1.8 ft | - | - | - |
| Outside Body Width | 12.9 ft | - | - | - |
| Inside Body Width | 11.9 ft | - | - | - |
| Front Canopy Height | 13.5 ft | - | - | - |
| Rear Axle - Clearance | 1.8 ft | - | - | - |
| Centerline of Rear Dual Tire Width | 8.3 ft | - | - | - |
| Overall Tire Width | 12.1 ft | - | - | - |
General |
||||
| Engine Output - SAE J1995 | - | 3015 hp | - | - |
| Bucket Payload | - | 67 ton (US) | - | - |
| Operating Weight | - | 660 ton (US) | - | - |
| Note | - | Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available. | - | - |
Diesel Engines |
||||
| Rated Speed | - | 1,800 min-1 (1,800 rpm) | - | - |
| Number of Cylinders - Each Engine | - | 12 | - | - |
| Bore | - | 6.69 in | - | - |
| Stroke | - | 8.46 in | - | - |
| Displacement | - | 3574 in³ | - | - |
| Aspiration | - | Turbocharged and charge air-cooled | - | - |
| Components (1) | - | Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs) | - | - |
| Components (2) | - | High-capacity water separator | - | - |
| Components (3) | - | Two-stage fuel filter with series filtration | - | - |
| Components (4) | - | Heavy-duty air filters | - | - |
| Components (5) | - | Microprocessed engine management | - | - |
| Components (6) | - | Hydraulically driven radiator fan with electronically controlled fan speed | - | - |
| Components (7) | - | Exhaust manifold and turbo heat shields | - | - |
Diesel Engine - Lesser Regulated |
||||
| Gross Power - SAE J1995 | - | 3025 hp | - | - |
| Net Power - ISO 9249 | - | 2990 hp | - | - |
| Net Power - SAE J1349 | - | 2821 hp | - | - |
| Emissions | - | Optimized for fuel consumption. | - | - |
Diesel Engine - Highly Regulated |
||||
| Gross Power - SAE J1995 | - | 3015 hp | - | - |
| Net Power - SAE J1349 | - | 2810 hp | - | - |
| Net Power - ISO 9249 | - | 2979 hp | - | - |
| Emissions | - | Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions. | - | - |
Electrical System |
||||
| System Voltage | - | 24 V | - | - |
| Batteries in Series/Parallel Installation | - | 6 x 210 Ah; 12 V each; 630 Ah 24 V in total | - | - |
| Components (1) | - | 6 maintenance-free batteries | - | - |
| Components (2) | - | Lockable battery isolator switch | - | - |
| Components (3) | - | Lockable starter isolator switch | - | - |
| Components (4) | - | 13 LED high-brightness working flood lights | - | - |
| Components (5) | - | 17 LED service lights | - | - |
| Components (6) | - | 2 electric horns (1 cab module; 1 oil cooler module) | - | - |
Operating Weights |
||||
| 6060 FS - Standard Track Pads | - | 4.58 ft | - | - |
| 6060 FS - Operating Weight | - | 1320110 lb | - | - |
| 6060 FS - Ground Pressure | - | 26.6 N/cm2 (38.5 psi) | - | - |
| Backhoe - Standard Track Pads | - | 4.58 ft | - | - |
| Backhoe - Operating Weight | - | 1323860 lb | - | - |
| Backhoe - Ground Pressure | - | 26.7 N/cm2 (38.7 psi) | - | - |
| Note | - | Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants. | - | - |
Hydraulic System with Pump Managing System |
||||
| Main Pumps - Diesel Version | - | 8 variable swash plate pumps | - | - |
| Main Pumps - Maximum Oil Flow - Diesel Version | - | 8 x 650 L/min (8 x 172 gal/min) | - | - |
| Maximum Pressure - Attachment | - | 4640 psi | - | - |
| Maximum Pressure - Travel | - | 5220 psi | - | - |
| Swing Pumps - Diesel Version | - | 4 reversible swash plate pumps | - | - |
| Swing Pumps - Maximum Oil Flow - Diesel Version | - | 4 x 352 L/min (4 x 93 gal/min) | - | - |
| Maximum Pressure - Swing Pumps | - | 5075 psi | - | - |
Hydraulic Oil Cooling |
||||
| Oil Flow of Cooling Pumps | - | 4 x 488 L/min (4 x 129 gal/min) | - | - |
| Components | - | 4 cooling fans | - | - |
| Diameter - Fan | - | 46 in | - | - |
| Features (1) | - | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running | - | - |
| Features (2) | - | Fan speed and flow of oil to the coolers are thermostatically controlled | - | - |
| Features (3) | - | Extremely high cooling efficiency to ensure optimum oil temperature | - | - |
| Features (4) | - | Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers | - | - |
Swing System |
||||
| Swing Drive | - | 4 compact planetary transmissions with axial piston motors | - | - |
| Parking Brakes | - | Wet multiple disc brake, spring loaded/hydraulically released | - | - |
| Maximum Swing Speed | - | 3.8 r/min | - | - |
| Swing Ring | - | Triple-race roller bearing with sealed internal gearing | - | - |
| Features (1) | - | Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody | - | - |
| Features (2) | - | Closed-loop swing circuit with torque control | - | - |
| Features (3) | - | Hydraulic braking of the swing motion by counteracting control | - | - |
| Features (4) | - | All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system | - | - |
Undercarriage |
||||
| Travel Speed - 1st Stage - Maximum | - | 0.68 mile/h | - | - |
| Travel Speed - 2nd Stage - Maximum | - | 0.99 mile/h | - | - |
| Maximum Tractive Force | - | 661160 lb | - | - |
| Gradeability - Travel Drives - Maximum | - | 39 % | - | - |
| Track Pads - Each Side | - | 42 | - | - |
| Bottom Rollers - Each Side | - | 7 | - | - |
| Support Rollers - Each Side | - | 2 plus a skid plate in between | - | - |
| Travel Drives - Each Side | - | 1 planetary transmission with 2 two-stage axial piston motors | - | - |
| Components (1) | - | HD tracks with cast double-grouser track pad | - | - |
| Components (2) | - | HD fixed axle rollers and idlers | - | - |
| Components (3) | - | Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas | - | - |
| Components (4) | - | Acoustic travel alarm (forward and reverse) | - | - |
| Components (5) | - | Fully hydraulic, self-adjusting track tensioning system with piston accumulator | - | - |
| Components (6) | - | Automatic hydraulic retarder valve to prevent over-speed on downhill travel | - | - |
Operator's Cab |
||||
| Operator's Eye Level - Approximately | - | 24.91 ft | - | - |
| Internal Dimensions of Cab - Length | - | 7.33 ft | - | - |
| Internal Dimensions of Cab - Width | - | 5.33 ft | - | - |
| Internal Dimensions of Cab - Height | - | 6.75 ft | - | - |
| Components (1) | - | Single hydraulically driven HVAC System, with dual system option | - | - |
| Components (2) | - | In-floor window with removable grate | - | - |
| Components (3) | - | Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support | - | - |
| Components (4) | - | Independently adjustable seat consoles with integrated joysticks | - | - |
| Components (5) | - | Operator Protective Guard (Top Guard) (ISO 10262:1998) | - | - |
| Components (6) | - | Elevated full-size trainer seat with safety belt and laptop desk | - | - |
| Components (7) | - | Additional fold-away auxiliary seat with safety belt | - | - |
| Components (8) | - | Operator Presence switch | - | - |
| Components (9) | - | Monitoring system with 254 mm (10 in) touch screen | - | - |
| Components (10) | - | Powered 45 degree access stairway | - | - |
| Components (11) | - | Emergency egress ladder | - | - |
| Components (12) | - | FM/AM radio with USB and AUX input | - | - |
| Components (13) | - | Roller blinds on 3 front windows | - | - |
| Components (14) | - | 3 cup holders | - | - |
| Components (15) | - | Cat Electronic Technician service port | - | - |
Automatic Lubrication System |
||||
| Capacity - Grease Container | - | 188 gal (US) | - | - |
| Type (1) | - | Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times | - | - |
| Type (2) | - | System failures displayed by monitoring system | - | - |
| Type (3) | - | Grease filters (200 µm) between service station and container as well as directly behind grease pump | - | - |
| Type (4) | - | Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring | - | - |
Attachments |
||||
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) | - | Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces | - | - |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) | - | Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance | - | - |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) | - | Constant boom momentum throughout the entire lift arc; Crowd force assistance | - | - |
| All buckets (FS and BH) are equipped with a wear package consisting of: (1) | - | Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth | - | - |
| All buckets (FS and BH) are equipped with a wear package consisting of: (2) | - | Wing shrouds on side walls and heel shrouds at bottom edges | - | - |
| Type (1) | - | Catwalks with rails at booms (FS and BH) | - | - |
| Type (2) | - | Guards for shovel cylinders (FS) | - | - |
| Type (3) | - | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve | - | - |
| Type (4) | - | Service access holes from both sides of boom (FS and BH) and stick (FS) | - | - |
| Type (5) | - | Welding procedures allow for internal counter-welding (double prep weld) wherever possible | - | - |
| Type (6) | - | Booms and sticks are stress-relieved after welding | - | - |
| Type (7) | - | Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas | - | - |
| Type (8) | - | Special wear packages for highly abrasive materials available upon request | - | - |
Digging Forces |
||||
| Maximum Crowd Force | - | 494410 lb | - | - |
| Maximum Breakout Force | - | 388780 lb | - | - |
Working Ranges |
||||
| Maximum Digging Height | - | 51.17 ft | - | - |
| Maximum Digging Reach | - | 54.17 ft | - | - |
| Maximum Digging Depth | - | 9.17 ft | - | - |
Standard Bucket Capacity |
||||
| Face Shovel (heaped 2:1) | - | 44.5 yd³ | - | - |
| Backhoe (heaped 1:1) | - | 44.5 yd³ | - | - |
Backhoe Attachment (BH) - Digging Forces |
||||
| Stick Digging Force - ISO | - | 295740 lb | - | - |
| Bucket Digging Force - ISO | - | 274840 lb | - | - |
Backhoe Attachment (BH) - Working Range |
||||
| Maximum Digging Height | - | 52.83 ft | - | - |
| Maximum Digging Reach | - | 62.33 ft | - | - |
| Maximum Digging Depth | - | 29.17 ft | - | - |
Retractable Service Station |
||||
| Installation | - | Retractable service station installed underneath the engine module and easily accessible from ground. | - | - |
| Equipped With (1) | - | Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container | - | - |
| Equipped With (2) | - | Cat jump-start socket | - | - |
| Equipped With (3) | - | Indicator lights | - | - |
Braking System |
||||
| Service Brakes | - | - | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | - |
| Front Wet Disc Brake Surface Area | - | - | 12662 in² | - |
| Rear - Wet Disc Brake Surface Area | - | - | 20861 in² | - |
| Standards | - | - | (Service and Secondary) ISO 3450:2011 | - |
| Parking Brake | - | - | Four-corner, Multi-disc, Spring applied, Hydraulically Released | - |
Capacity - HP Body - 100% Fill Factor |
||||
| Struck | - | - | 77 m3(101 yd3) | - |
| Heaped (SAE 2:1)* | - | - | 187 | - |
| Note (1) | - | - | Consult your local Cat dealer for body recommendations | - |
Cab |
||||
| Air Conditioning | - | - | (HFC - 134A refrigerant) 24,500 Btu/hr | - |
| Heater / Defroster | - | - | 33300 Btu/h | - |
| FOPS Standards | - | - | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. | - |
| ROPS Standards (2) | - | - | ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. | - |
Dimensions (Approximate) |
||||
| Height - Top of ROPS | - | - | 5550 mm | - |
| Overall Body Length | - | - | 12945 mm | - |
| Inside Body Length | - | - | 8730 mm | - |
| Overall Length | - | - | 12970 mm | - |
| Wheel Base | - | - | 57000 mm | - |
| Rear Axle - Tail | - | - | 3856 mm | - |
| Ground Clearance | - | - | 1304 mm | - |
| Dump Clearance | - | - | 1585 mm | - |
| Loading Height - Empty | - | - | 6147 mm | - |
| Rear Sidewall Height | - | - | 1010 mm | - |
| Inside Body Depth - Maximum | - | - | 3075 mm | - |
| Overall Height - Body Raised | - | - | 11534 mm | - |
| Operating Width | - | - | 7822 mm | - |
| Centerline Front Tire Width | - | - | 5410 mm | - |
| Engine Guard Clearance | - | - | 1290 mm | - |
| Overall Canopy Width | - | - | 7769 mm | - |
| Outside Body Width | - | - | 7123 mm | - |
| Inside Body Width | - | - | 6920 mm | - |
| Front Canopy Height | - | - | 6739 mm | - |
| Rear Axle - Clearance | - | - | 1263 mm | - |
| Centerline of Rear Dual Tire Width | - | - | 4695 mm | - |
| Overall Tire Width | - | - | 7120 mm | - |
Weights |
||||
| LRC Bare Chassis Weight without Hoist | - | - | - | 58414 lb |
| LRC Bare Chassis Weight with Hoist | - | - | - | 59223 lb |
| LRC Gross Vehicle Weight (Target) with Hoist | - | - | - | 180999 lb |
| LRC Gross Vehicle Weight (Target) without Hoist | - | - | - | 180999 lb |
| HRC Bare Chassis Weight without Hoist | - | - | - | 59567 lb |
| HRC Bare Chassis Weight with Hoist | - | - | - | 60376 lb |
| HRC Gross Vehicle Weight (Target) with Hoist | - | - | - | 180999 lb |
| HRC Gross Vehicle Weight (Target) without Hoist | - | - | - | 180999 lb |
| Note | - | - | - | LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. |
Add a Similar Product:
