CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D3 Track-Type Tractor
    View Product
    834 Wheel Dozer
    View Product Remove
    814 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat® C3.6 Cat® C18  Cat® C7.1
    Power - Net 104 hp - -
    Displacement 220 in³ 1105 in³ 427.8 in³
    Net Power - 2,200 rpm - SAE J1349 104 hp - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 hp - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module, and alternator.
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. The following engine configurations are available: – Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. – Noncertified that emits equivalent to U.S. EPA Tier 3. -
    Net Power - SAE J1349:2011 - 496 hp 249 hp
    Rated Speed - 1900 r/min 2200 r/min
    Peak Power Speed - 1500 r/min -
    Gross Power - SAE J1995:2014 - 562 hp 286 hp
    Bore - 5.7 in 4.1 in
    Stroke - 7.2 in 5.3 in
    Peak Torque - 1,300 rpm - 2092 lb/ft -
    Torque Rise - 52 % 26 %
    Net Power - ISO 9249:2007 - - 249 hp
    Engine Power - ISO 14396:2002 - - 275 hp
    Emissions - - Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
    Peak Torque (1400 rpm) - - 902 lbf·ft
    Engine Power - ISO 14396: 2002 - - 275 hp
    Peak Torque ( 1,400 rpm ) - - 749 lbf·ft
    High Idle Speed - - 2270 r/min
    Low Idle Speed - - 800 r/min
    Maximum Altitude without Derating - - 9842.5 ft

    Weights
    Operating Weight 20640 lb - -
    Operating Weight - LGP 21369 lb - -
    Operating Weight - LGP, 762 mm/30 in 21810 lb - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - -

    Transmission
    Drive Pumps 1 - -
    Maximum Travel Speed - Forward 5.6 mile/h - -
    Maximum Travel Speed - Reverse 6.2 mile/h - -
    Track Motors 2 - -
    Relief Valve Settings 7033 psi - -
    Transmission Type - Cat planetary power shift Cat Planetary Power Shift
    Forward - 1 - 4.2 mile/h 3.7 mile/h
    Forward - 2 - 7.2 mile/h 6.5 mile/h
    Forward - 3 - 12.6 mile/h 11.2 mile/h
    Forward - 4 - 22 mile/h 19.4 mile/h
    Reverse - 1 - 4.2 mile/h 4.2 mile/h
    Reverse - 2 - 7.6 mile/h 7.3 mile/h
    Reverse - 3 - 13.3 mile/h 12.8 mile/h
    Direct Drive - Forward 1 - Lock-up disabled -
    Direct Drive - Forward 2 - 7.7 mile/h -
    Direct Drive - Forward 3 - 13.7 mile/h -
    Direct Drive - Forward 4 - 23.9 mile/h -
    Direct Drive - Reverse 1 - 4.5 mile/h -
    Direct Drive - Reverse 2 - 8.1 mile/h -
    Direct Drive - Reverse 3 - 14.3 mile/h -
    Note - Travel speeds based on 35/65-R33 tire -
    Reverse - 4 - - 22.1 mile/h

    Hydraulic Controls
    Pump Output 17.2 gal/min - -
    Relief Valve Settings 2988 psi - -

    Ripper
    Type Parallelogram - -
    Number of Shanks 3 - -
    Height 6.5 in - -
    Weight 1222 lb - -
    Maximum Digging Depth 13.3 in - -
    Maximum Reach - Ground Line 30.2 in - -
    Overall Width 67.3 in - -
    Maximum Ground Clearance Under Tip 17.6 in - -

    Undercarriage
    Ground Pressure - LGP 4.5 psi - -
    Track Gauge - LGP 69 in - -
    Length - Track on Ground - LGP 91 in - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40 - -
    Ground Pressure - LGP, 762 mm (30 in) 3.9 psi - -
    Length - Track on Ground - LGP, 762 mm (30 in) 91 in - -
    Shoe Width - LGP 26 in - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - -
    Track Gauge 63 in - -
    Number of Rollers - Each Side 7 - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    Shoe Width - Standard 20 in - -

    Undercarriage 
    Ground Pressure  5.7 psi - -
    Length of Track on Ground  91 in - -
    Number of Shoes - Each Side - Abrasion Undercarriage  36 - -

    Service Refill Capacities
    Cooling System 5 gal (US) 31.7 gal (US) -
    Final Drive - Each - LGP 2.6 gal (US) - -
    Crankcase - With Filter 2.8 gal (US) - -
    Transmission - Hydraulic Tank 23.8 gal (US) - -
    Fuel Tank 51.5 gal (US) 209.5 gal (US) 132.1 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - -
    Crankcase - 15.9 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) 4.2 gal (US)
    Transmission - 31.7 gal (US) 13.2 gal (US)
    Hydraulic System Factory Fill - 63.4 gal (US) -
    Differential - Final Drives - Front - 49.1 gal (US) 17.2 gal (US)
    Differential - Final Drives - Rear - 49.1 gal (US) 17.2 gal (US)
    Hydraulic System - Tank Only - 37 gal (US) -
    Note (1) - All non-road Tier 4 Final/Stage V diesel engines are required to use: – ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este All nonroad Tier 4 Final and EU Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that
    Cooling Systems - Tier 4 Final/EU Stage V - - 21.4 gal (US)
    Cooling Systems - Tier 3/Stage IIIA equivalent - - 19.3 gal (US)
    Engine Crankcase - - 5.3 gal (US)
    Hydraulic System - Implement/Steering - - 34.1 gal (US)
    Hydraulic Tank Only - - 19.8 gal (US)

    Service Refill Capacities 
    Final Drives - Each Side  2.6 gal (US) - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con

    Dimensions
    BLADE: Blade Width - LGP 126.7 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    BLADE: Digging Depth - LGP 23.2 in - -
    Track Gauge - LGP 67.9 in - -
    BLADE: Blade Capacity (SAE) - LGP 3.06 yd³ - -
    BLADE: Blade Width at Maximum Angle - LGP 115.8 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - -
    BLADE: Blade Height - LGP 39.8 in - -
    BLADE: Blade Lift Height - LGP 30.2 in - -
    Ground Clearance - LGP 13 in - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 169.6 in - -
    Overall Length - With Blade - LGP 169.6 in - -
    Note With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) - -
    BLADE: Maximum Tilt - LGP 17.7 in - -
    BLADE: Maximum Angle (either side) - LGP 25° - -
    Length of Basic Dozer (without blade) - Standard 128.7 in - -
    Dozer Height - Standard 109 in - -
    Width of Dozer (standard shoes, no blade) - LGP 94.9 in - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 103.5 in - -
    Length of Basic Dozer (without blade) - LGP 128.7 in - -
    Dozer Height - LGP, 762 mm (30 in) 109 in - -
    Width of Dozer (standard shoes, no blade) - Standard 83 in - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 128.7 in - -
    Dozer Height - LGP 109 in - -
    Height - Top of Exhaust Stack - 15.9 ft -
    Height - Top of Air Cleaner - 12.8 ft -
    Height - Top of Hood - 10.9 ft -
    Ground Clearance - Bumper - 3.1 ft -
    Centerline of Rear Axle to Edge of Bumper - 10.5 ft -
    Wheel Base - 14.9 ft -
    Length - Front of Tire - 28.4 ft -
    Length - Straight Blade on Ground - 32.6 ft -
    Length - Universal Blade on Ground - 34.4 ft -
    Centerline of Front Axle to Hitch - 7.5 ft -
    Ground Clearance - 1.7 ft -
    Height - Top of Cab - 13.7 ft -

    Dimensions 
    BLADE: Blade Capacity (SAE) - Standard  2.86 yd³ - -
    Track Gauge - Standard  63 in - -
    BLADE: Digging Depth - Standard  23.8 in - -
    BLADE: Blade Lift Height - Standard  30.2 in - -
    Ground Clearance - Standard  13 in - -
    Overall Length - With Blade - Standard  170.7 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58° - -
    BLADE: Blade Height - Standard  42.2 in - -
    BLADE: Maximum Tilt - Standard  15.8 in - -
    Note  Abrasion Undercarriage - -
    BLADE: Blade Width - Standard  109.5 in - -
    BLADE: Blade Width at Maximum Angle - Standard  103.8 in - -
    BLADE: Maximum Angle (either side) - Standard  25° - -

    Engine 
    Power Train  Hydrostatic - -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 Level II - -

    Retrieval Winch
    Maximum Line Pull - Bare Drum 32150 lb - -
    Control Hydraulic - -
    Rope Diameter - Optional 0.75 in - -
    Drum Capacity - Optional Cable 195 ft - -
    Maximum Line Speed - Full Drum 79 ft/min - -
    Drum Capacity - Recommended Cable 277 ft - -
    Winch Drive Hydraulic - -
    Weight 1747 lb - -
    Maximum Line Pull - Full Drum 20350 lb - -
    Rope Diameter - Recommended 0.63 in - -
    Maximum Line Speed - Bare Drum 50 ft/min - -
    Speed Variable - -
    Winch Length 35.63 in - -
    Drum Diameter 8 in - -
    Overall width 27.91 in - -
    Drum Width 9.65 in - -
    Throat Clearance 5.6 in - -

    High Performance Winch
    Winch length 27.76 in - -
    Rope diameter – optional 0.75 in - -
    Maximum line speed – bare drum 131 ft/min - -
    Maximum line pull – bare drum 40000 lb - -
    Weight 1345 lb - -
    Drum capacity – optional 256 ft - -
    Maximum line speed – full drum 207 ft/min - -
    Rope diameter – recommended 0.63 in - -
    Winch drive Hydrostatic - -
    Throat clearance 6.75 in - -
    Drum diameter 10 in - -
    Overall width 29.2 in - -
    Drum width 10.8 in - -
    Maximum line pull – full drum 25000 lb - -
    Speed Variable - -
    Drum capacity – recommended cable 371 ft - -
    Control Hydraulic - -

    Operating Specifications
    Operating Weight - 105271 lb -
    Blade Capacities - 7.9 – 22.2 m3 (10.3 – 29.0 yd3) -
    Operating Weight (Tier 4 Final/Stage V) - - 48526 lb
    Operating Weight (Tier 3/Stage IIIA equivalent) - - 47887 lb

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated LS valve with EH Pilot operated load sensing valve with EH
    Lift/Tilt System - Variable displacement piston Variable displacement piston
    Maximum Flow at 1,900 rpm - 153 gal/min -
    Relief Valve Setting - Lift/Tilt - 4641 psi 3190 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - 139.75 mm × 1021 mm (5.5 in × 40.2 in) 120 mm × 915 mm (4.7 in × 36.0 in)
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 140 mm × 230 mm (5.5 in × 9.1 in) 101.6 mm × 234 mm (4.0 in × 9.2 in)
    Pilot System - Variable displacement piston Open center, fixed displacement gear
    Pilot Maximum Flow - 13.7 gal/min -
    Pilot Relief Valve Setting - 580 psi 3046 psi
    Maximum Flow at 2,200 rpm - - 23.5 gal/min

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing
    Steering System - Pump - Piston, variable displacement Variable displacement piston
    Maximum Flow - 65.8 gal/min -
    Relief Valve Setting - Steering - 3495 psi 4003 psi
    Total Steering Angle - 86 ° 72°
    Steering Cycle Times - High Idle - 3.1 s 3 s
    Steering Cycle Times - Low Idle - 5.7 s 8.2 s
    Maximum Flow at 2,200 rpm - - 38.8 gal/min

    Axles
    Front - Fixed Planetary – Fixed
    Rear - Trunnion Planetary – Oscillating
    Oscillation Angle - ±13° ±10°

    Brakes
    Brakes - ISO 3450: 2011 -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - 113 dB(A) 111 dB(A)
    Operator Sound Pressure Level (ISO 6396:2008)* - 72 dB(A) 70 dB(A)
    Machine Sound Power Level (ISO 6395:2008)** - 109 dB(A) -
    Note (1) - * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” * Sound suppression equipped
    Note (2) - ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
    Note (3) - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
    Note (4) - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (5) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Machine Sound Power Level (ISO 6395:2008)* - - 109 dB(A)

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - 113 dB(A) 112 dB(A)
    Operator Sound Pressure Level (ISO 6396:2008)* - 72 dB(A) 70 dB(A)
    Machine Sound Power Level (ISO 6395:2008)** - 110 dB(A) -
    Note (1) - * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” * Sound suppression equipped
    Note (2) - ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
    Note (3) - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at maximum engine cooling fan speed.
    Note (4) - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (5) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Machine Sound Power Level (ISO 6395:2008)* - - 110 dB(A)

    Braking System
    Service Brakes - - Single Disc Wet (enclosed) 4 WHL
    Parking Brake - - Drum and Shoe, Spring Applied, Hydraulic Released

    Dimensions (Approximate)
    Height to Top of Beacon - - 13.1 ft
    Height - Top of Cab - - 12.1 ft
    Height - Top of Exhaust Pipe - - 11.3 ft
    Height - Top of Hood - - 8.7 ft
    Height to Top of Radiator Guard - - 8 ft
    Ground Clearance to Hitch - - 1.4 ft
    Ground Clearance to Transmission Guard - - 1.4 ft
    Ground Clearance to Bottom of Bumper - - 2.3 ft
    Centerline of Rear Axle to Bumper - - 6.5 ft
    Centerline of Front Axle to Hitch - - 5.5 ft
    Wheel Base - - 11 ft
    Width over Platform - - 10.3 ft
    Overall Length to Front Tire - - 21 ft
    Overall Machine Length with Straight Blade - - 23.6 ft
    Overall Machine Length with Coal Blade - - 25.5 ft

    Straight Blade
    Capacity - - 3.72 yd³
    Overall Width - - 12 ft
    Height - - 3.3 ft
    Dig Depth - - 1.6 ft
    Ground Clearance - - 3 ft
    Maximum Tilt - - 2.6 ft
    Turning Radius – Outside Corner of Blade - - 23.5 ft
    Turning Radius – Inside Corner of Blade - - 11.6 ft
    Weight - - 3000 lb
    Total Operating Weight - - 48526 lb

    Coal Blade
    Capacity - - 13.8 yd³
    Overall Width - - 14.2 ft
    Height - - 4.8 ft
    Dig Depth - - 1.6 ft
    Ground Clearance - - 3.1 ft
    Maximum Tilt - - 3.1 ft
    Turning Radius – Outside Corner of Blade - - 25.1 ft
    Turning Radius – Inside Corner of Blade - - 11.2 ft
    Weight - - 4429 lb
    Total Operating Weight - - 49996 lb
    Add a Similar Product: