D3 Track-Type Tractor

Product description

The new Cat® D3 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Engine
  • Engine Model - Cat® C3.6
  • Power - Net - 104HP
  • Displacement - 220in³
  • Net Power - 2,200 rpm - SAE J1349 - 104HP
  • Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - 104HP
  • Note (1) - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
  • Note (2) - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Weights
  • Operating Weight - 20639.68lb
  • Operating Weight - LGP - 21369lb
  • Operating Weight - LGP, 762 mm/30 in - 21810lb
  • Note (2) - For machine with ripper, add 554 kg (1,222 lb).
  • Note (1) - Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Weights 
  • Operating Weight - 20640lb
Transmission
  • Drive Pumps - 1
  • Maximum Travel Speed - Forward - 5.6mile/h
  • Maximum Travel Speed - Reverse - 6.2mile/h
  • Track Motors - 2
  • Relief Valve Settings - 7033psi
Hydraulic Controls
  • Pump Output - 17.2gal/min
  • Relief Valve Settings - 2988psi
Winch
  • Weight - 1345lb
  • Winch Drive - Hydrostatic
  • Control - Hydraulic
  • Speed - Variable
  • Maximum Line Pull - Full Drum - 25000lb
  • Throat Clearance - 6.75in
  • Rope Diameter - Recommended - 0.63in
  • Overall Width - 29.2in
  • Maximum Line Speed - Full Drum - 207ft/min
  • Rope Diameter - Optional - 0.75in
  • Maximum Line Pull - Bare Drum - 40000lb
  • Drum Capacity - Optional Cable - 256ft
  • Winch Length - 27.76in
  • Drum Width - 10.8in
  • Maximum Line Speed - Bare Drum - 131ft/min
  • Drum Capacity - Recommended Cable - 371ft
  • Drum Diameter - 10in
Ripper
  • Type - Parallelogram
  • Number of Shanks - 3
  • Height - 6.5in
  • Weight - 1222lb
  • Maximum Digging Depth - 13.3in
  • Maximum Reach - Ground Line - 30.2in
  • Overall Width - 67.3in
  • Maximum Ground Clearance Under Tip - 17.6in
Undercarriage
  • Ground Pressure - LGP - 4.5psi
  • Track Gauge - LGP - 69in
  • Length - Track on Ground - LGP - 91in
  • Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - 40
  • Ground Pressure - LGP, 762 mm (30 in) - 3.9psi
  • Length - Track on Ground - LGP, 762 mm (30 in) - 91in
  • Shoe Width - LGP - 26in
  • Shoe Width - LGP, 762 mm (30 in) - 30in
  • Track Gauge - 63in
  • Number of Rollers - Each Side - 7
  • Track Gauge - LGP, 762 mm (30 in) - 73in
  • Shoe Width - Standard - 20in
Undercarriage 
  • Ground Pressure  - 5.7psi
  • Length of Track on Ground  - 91in
  • Number of Shoes - Each Side - Abrasion Undercarriage  - 36
Service Refill Capacities
  • Cooling System - 5gal (US)
  • Final Drive - Each - LGP - 2.6gal (US)
  • Crankcase - With Filter - 2.8gal (US)
  • Diesel Exhaust Fluid (DEF) Tank - 4.9gal (US)
  • Transmission - Hydraulic Tank - 23.8gal (US)
  • Fuel Tank - 51.5gal (US)
Service Refill Capacities 
  • Final Drives - Each Side  - 2.6gal (US)
Air Conditioning System
  • Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Dimensions
  • BLADE: Blade Width - LGP - 126.7in
  • Track Gauge - LGP, 762 mm (30 in) - 73in
  • BLADE: Digging Depth - LGP - 23.2in
  • Track Gauge - LGP - 67.9in
  • BLADE: Blade Capacity (SAE) - LGP - 3.06yd³
  • BLADE: Blade Width at Maximum Angle - LGP - 115.8in
  • BLADE: Blade Cutting Edge Angle, Adjustable - LGP - 52° to 58°
  • Ground Clearance - LGP, 762 mm (30 in) - 13in
  • BLADE: Blade Height - LGP - 39.8in
  • BLADE: Blade Lift Height - LGP - 30.2in
  • Ground Clearance - LGP - 13in
  • Overall Length - With Blade - LGP, 762 mm (30 in) - 169.6in
  • Overall Length - With Blade - LGP - 169.6in
  • Note - With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
  • BLADE: Maximum Tilt - LGP - 17.7in
  • BLADE: Maximum Angle (either side) - LGP - 25°
  • Length of Basic Dozer (without blade) - Standard - 128.7in
  • Dozer Height - Standard - 109in
  • Width of Dozer (standard shoes, no blade) - LGP - 92.9in
  • Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) - 103.5in
  • Length of Basic Dozer (without blade) - LGP - 128.7in
  • Dozer Height - LGP, 762 mm (30 in) - 109in
  • Width of Dozer (standard shoes, no blade) - Standard - 83in
  • Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) - 128.7in
  • Dozer Height - LGP - 109in
Dimensions 
  • BLADE: Blade Capacity (SAE) - Standard  - 2.86yd³
  • Track Gauge - Standard  - 63in
  • BLADE: Digging Depth - Standard  - 23.8in
  • BLADE: Blade Lift Height - Standard  - 30.2in
  • Ground Clearance - Standard  - 13in
  • Overall Length - With Blade - Standard  - 170.7in
  • BLADE: Blade Cutting Edge Angle, Adjustable - Standard  - 52° to 58°
  • BLADE: Blade Height - Standard  - 42.2in
  • BLADE: Maximum Tilt - Standard  - 15.8in
  • Note  - Abrasion Undercarriage
  • BLADE: Blade Width - Standard  - 109.5in
  • BLADE: Blade Width at Maximum Angle - Standard  - 103.8in
  • BLADE: Maximum Angle (either side) - Standard  - 25°
Engine 
  • Power Train  - Hydrostatic
Cab
  • ROPS - ISO 3471:2008
  • FOPS - ISO 3449:2005 Level II
Standard Equipment:
  • Power Train
    • Air cleaner with precleaner, automatic dust ejection and underhood intake
    • Aluminum bar plate cooling system (radiator, power train)
    • Automatic traction control
    • Cat C3.6 diesel engine
    • Drive, auxiliary
    • Dual path, closed loop, hydrostatic transmission
    • Electric fuel pump
    • Fuel/water separator
    • Turbocharged aftercooled
  • Electrical
    • Alarm, backup
    • Alternator, 150 amp, heavy duty
    • Batteries, heavy duty, maintenance free, 1,000 CCA
    • Diagnostic connector
    • Four integrated front halogen lights, two rear halogen
    • Horn, electric
    • Starter, electric, 12 V, heavy duty
  • Undercarriage
    • SALT undercarriage (40 section)
    • Carrier rollers
    • Guards, front/rear guiding
    • Seven roller track frame
    • Track adjusters, hydraulic
    • Track rollers, lifetime lubricated
  • Hydraulic
    • Hydraulic pump and oil
    • Single lever, three function control
    • Three valve hydraulics
  • Cat Technology
    • Cat Product Link PLE643/PLE743 Cellular
    • Slope Indicate
    • Stable blade
    • Compatibility with radios and base stations from Trimble, Topcon, and Leica
    • Capability to install 3D grade systems from Trimble, Topcon, and Leica
  • Attachments
    • Rigid drawbar
    • Front pull device
  • Operator Environment
    • Armrests, adjustable
    • Coat hook
    • Controls, seat mounted, fore/aft adjustment
    • Cup holders
    • Eco mode
    • Electronic Monitoring system with gauge:
      – Chassis slope indication
      – Diesel exhaust fluid (DEF)
      – Engine coolant temperature
      – Fuel level
      – Hydraulic oil temperature
    • Electronic security system
    • Engine air cleaner service indicator
    • Engine RPM and gear display
    • Floor mat, rubber, heavy duty
    • Foot pads, dash
    • Hour meter, electronic
    • Independent forward/reverse speed settings
    • Mirror, rearview, inside
    • Power port, 12 volt
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, hi-vis retractable 76 mm (3")
    • Seatbelt buckling indicator/reminder
    • Single pedal combining decel and brake functions
    • Speed recall
    • Storage compartment
    • Throttle switch, rotary
    • Travel speed limiter, electronic
Optional Equipment:
  • Power Train
    • Air cleaner with external precleaner
    • Installation, winch
  • Electrical
    • Four integrated front LED lights, two rear LED
  • Undercarriage
    • Abrasion undercarriage (36 section)
    • Track Pairs
      – Track, 510 mm (20 in)
      – Track, 660 mm (26 in)
      – Track, 762 mm (30 in)
  • Hydraulic
    • Four valve for use with ripper
    • Four valve for use with winch
  • Cat Technology
    • Cat GRADE with Slope Assist
    • Cat GRADE with 3D
    • Cat Product Link PLE683/PLE783 Cellular/Satellite
    • Full-color 10 in (254 mm) touchscreen grade display
    • Power Pitch
  • Attachments
    • Drawbar, towing
    • Machine security system
    • Mounting, winch
    • Ripper, parallelogram, includes three shanks and teeth
    • Winch, hydraulic, high performance
    • Winch, hydraulic, retrieval
  • Operator Environment
    • Cab, with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Radio, AM/FM Bluetooth®
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Sound suppression
  • Other
    • Heater, engine, coolant 120 V/240 V
    • Starting aid, ether
Compare Products