CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D3 Track-Type Tractor
    View Product
    D6 Dozer
    View Product Remove
    814 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat® C3.6 Cat C9.3B -
    Power - Net 104 HP 215 HP -
    Displacement 220 in³ - -
    Net Power - 2,200 rpm - SAE J1349 104 HP - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 HP - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. Rated horsepower at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a -
    Power Train Hydrostatic - -
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( -
    Net Power - Rated - ISO 9249/SAE J1349 - 215 HP -
    Net Power (Rated) - ISO 9249 (DIN) - 219 mhp -
    Emissions - U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V -
    Note (3) - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. -
    Note (4) - Machine Build Number 20B -

    Weights
    Operating Weight 20640 lb 50733 lb -
    Operating Weight - LGP 21369 lb - -
    Operating Weight - LGP, 762 mm/30 in 21810 lb - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - -

    Transmission
    Drive Pumps 1 - -
    Maximum Travel Speed - Forward 5.6 mile/h - -
    Maximum Travel Speed - Reverse 6.2 mile/h - -
    Track Motors 2 - -
    Relief Valve Settings 7033 psi - -
    Power Train - Fully Automatic 4-Speed Powershift -
    Transmission Type - - Cat Planetary Power Shift
    Forward - 1 - - 3.7 mile/h
    Forward - 2 - - 6.5 mile/h
    Forward - 3 - - 11.2 mile/h
    Forward - 4 - - 19.4 mile/h
    Reverse - 1 - - 4.2 mile/h
    Reverse - 2 - - 7.3 mile/h
    Reverse - 3 - - 12.8 mile/h
    Reverse - 4 - - 22.1 mile/h

    Hydraulic Controls
    Pump Output 17.2 gal/min - -
    Relief Valve Settings 2988 psi - -

    Ripper
    Type Parallelogram - -
    Number of Shanks 3 - -
    Height 6.5 in - -
    Weight 1222 lb - -
    Maximum Digging Depth 13.3 in - -
    Maximum Reach - Ground Line 30.2 in - -
    Overall Width 67.3 in - -
    Maximum Ground Clearance Under Tip 17.6 in - -

    Undercarriage
    Ground Pressure - LGP 4.5 psi - -
    Track Gauge - LGP 69 in - -
    Length - Track on Ground - LGP 91 in - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40 - -
    Ground Pressure - LGP, 762 mm (30 in) 3.9 psi - -
    Length - Track on Ground - LGP, 762 mm (30 in) 91 in - -
    Shoe Width - LGP 26 in - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - -
    Track Gauge 63 in - -
    Number of Rollers - Each Side 7 - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    Ground Pressure 5.7 psi - -
    Length of Track on Ground 91 in - -
    Number of Shoes - Each Side - Abrasion Undercarriage 36 - -
    Shoe Width - Standard 20 in - -

    Service Refill Capacities
    Cooling System 5 gal (US) - -
    Final Drive - Each - LGP 2.6 gal (US) - -
    Crankcase - With Filter 2.8 gal (US) - -
    Transmission - Hydraulic Tank 23.8 gal (US) - -
    Fuel Tank 51.5 gal (US) 90 gal (US) 132.1 gal (US)
    Final Drives - Each Side 2.6 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - -
    DEF Tank - 7.4 gal (US) -
    Diesel Exhaust Fluid Tank - - 4.2 gal (US)
    Cooling Systems - Tier 4 Final/EU Stage V - - 21.4 gal (US)
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - - 19.3 gal (US)
    Engine Crankcase - - 5.3 gal (US)
    Transmission - - 13.2 gal (US)
    Differential - Final Drives - Front - - 17.2 gal (US)
    Differential - Final Drives - Rear - - 17.2 gal (US)
    Hydraulic System - Implement/Steering - - 34.1 gal (US)
    Hydraulic Tank Only - - 19.8 gal (US)

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. -

    Dimensions
    BLADE: Blade Width - LGP 126.7 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    BLADE: Digging Depth - LGP 23.2 in - -
    Track Gauge - LGP 67.9 in - -
    BLADE: Blade Capacity (SAE) - LGP 3.06 yd³ - -
    BLADE: Blade Width at Maximum Angle - LGP 115.8 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - -
    BLADE: Blade Height - LGP 39.8 in - -
    BLADE: Blade Lift Height - LGP 30.2 in - -
    Ground Clearance - LGP 13 in - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 169.6 in - -
    Overall Length - With Blade - LGP 169.6 in - -
    Note Abrasion Undercarriage - -
    BLADE: Maximum Tilt - LGP 17.7 in - -
    BLADE: Maximum Angle (either side) - LGP 25° - -
    BLADE: Blade Capacity (SAE) - Standard 2.86 yd³ - -
    Track Gauge - Standard 63 in - -
    BLADE: Digging Depth - Standard 23.8 in - -
    BLADE: Blade Lift Height - Standard 30.2 in - -
    Ground Clearance - Standard 13 in - -
    Overall Length - With Blade - Standard 170.7 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58° - -
    BLADE: Blade Height - Standard 42.2 in - -
    BLADE: Maximum Tilt - Standard 15.8 in - -
    BLADE: Blade Width - Standard 109.5 in - -
    BLADE: Blade Width at Maximum Angle - Standard 103.8 in - -
    BLADE: Maximum Angle (either side) - Standard 25° - -
    Length of Basic Dozer (without blade) - Standard 128.7 in - -
    Dozer Height - Standard 109 in - -
    Width of Dozer (standard shoes, no blade) - LGP 92.9 in - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 103.5 in - -
    Length of Basic Dozer (without blade) - LGP 128.7 in - -
    Dozer Height - LGP, 762 mm (30 in) 109 in - -
    Width of Dozer (standard shoes, no blade) - Standard 83 in - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 128.7 in - -
    Dozer Height - LGP 109 in - -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 Level II - -

    Retrieval Winch
    Maximum Line Pull - Bare Drum 32150 lb - -
    Control Hydraulic - -
    Rope Diameter - Optional 0.75 in - -
    Drum Capacity - Optional Cable 195 ft - -
    Maximum Line Speed - Full Drum 79 ft/min - -
    Drum Capacity - Recommended Cable 277 ft - -
    Winch Drive Hydraulic - -
    Weight 1747 lb - -
    Maximum Line Pull - Full Drum 20350 lb - -
    Rope Diameter - Recommended 0.63 in - -
    Maximum Line Speed - Bare Drum 50 ft/min - -
    Speed Variable - -
    Winch Length 35.63 in - -
    Drum Diameter 8 in - -
    Overall width 27.91 in - -
    Drum Width 9.65 in - -
    Throat Clearance 5.6 in - -

    High Performance Winch
    Winch length 27.76 in - -
    Rope diameter – optional 0.75 in - -
    Maximum line speed – bare drum 131 ft/min - -
    Maximum line pull – bare drum 40000 lb - -
    Weight 1345 lb - -
    Drum capacity – optional 256 ft - -
    Maximum line speed – full drum 207 ft/min - -
    Rope diameter – recommended 0.63 in - -
    Winch drive Hydrostatic - -
    Throat clearance 6.75 in - -
    Drum diameter 10 in - -
    Overall width 29.2 in - -
    Drum width 10.8 in - -
    Maximum line pull – full drum 25000 lb - -
    Speed Variable - -
    Drum capacity – recommended cable 371 ft - -
    Control Hydraulic - -

    D6 Push Arm
    Operating Weight - 48788 lb -
    Ground Pressure - 7.9 psi -
    Width of Standard Shoe - 24 in -
    Blade - Semi-Universal (SU) -
    Blade Capacity - 7.5 yd³ -

    D6 LGP (30-in) Push Arm
    Operating Weight - 50420 lb -
    Ground Pressure - 6.5 psi -
    Width of Standard Shoe - 30 in -
    Blade - Semi-Universal (SU) -
    Blade Capacity - 7.6 yd³ -

    D6 LGP (36-in) Push Arm
    Operating Weight - 52715 lb -
    Ground Pressure - 5.2 psi -
    Width of Standard Shoe - 36 in -
    Blade - Straight -
    Blade Capacity - 5 yd³ -

    D6 VPAT
    Operating Weight - 49108 lb -
    Ground Pressure - 7.1 psi -
    Width of Standard Shoe - 24 in -
    Blade - VPAT -
    Blade Capacity - 5.4 yd³ -

    D6 LGP (30-in) VPAT
    Operating Weight - 50733 lb -
    Ground Pressure - 5.9 psi -
    Width of Standard Shoe - 30 in -
    Blade - VPAT -
    Blade Capacity - 5.9 yd³ -

    D6 LGP (36-in) VPAT
    Operating Weight - 51912 lb -
    Ground Pressure - 5 psi -
    Width of Standard Shoe - 36 in -
    Blade - VPAT -
    Blade Capacity - 6.5 yd³ -

    Sustainability
    Recyclability - 98% -

    Engine - Tier 4 Final/EU Stage V
    Engine Model - - Cat C7.1
    Net Power (SAE J1349:2011) - - 249 HP
    Net Power (ISO 9249:2007) - - 249 HP
    Emissions - - U.S. EPA Tier 4 Final/EU Stage V
    Rated Speed - - 2200 r/min
    Gross Power (SAE J1995:2014) - - 284 HP
    Engine Power (ISO 14396:2002) - - 275 HP
    Peak Torque - 1,400 rpm - - 902 lb/ft
    Torque Rise - - 52%
    Bore - - 4.1 in
    Stroke - - 5.3 in
    Displacement - - 427.8 in³
    High Idle Speed - - 2270 r/min
    Low Idle Speed - - 800 r/min
    Maximum Altitude without Derating - - 9842.5 ft
    Note - - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - - 48526 lb

    Scoops
    Chip Scoop Doze Capacity - - 37.9 yd³
    Chip Scoop Carry Capacity - - 19 yd³

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - - Cat C7.1
    Emissions - - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
    Rated Speed - - 2200 r/min
    Net Power (SAE J1349:2011) - - 249 HP
    Gross Power (SAE J1995:2014) - - 286 HP
    Engine Power (ISO 14396:2002) - - 275 HP
    Peak Torque - 1,400 rpm - - 749 lb/ft
    Torque Rise - - 26%
    Bore - - 4.1 in
    Stroke - - 5.3 in
    Displacement - - 427.8 in³
    High Idle Speed - - 2270 r/min

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - - 47887 lb

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - - 52280 lb

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - - 51639 lb

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - - Pilot operated LS valve with EH
    Lift/Tilt System - - Variable displacement piston
    Maximum Flow at 2,200 rpm - - 23.5 gal/min
    Relief Valve Setting - Lift/Tilt - - 3190 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - - 120 mm × 915 mm (4.7 in × 36.0 in)
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - - 101.6 mm × 234 mm (4.0 in × 9.2 in)
    Pilot System - - Open center, fixed displacement gear
    Pilot Relief Valve Setting - - 3046 psi

    Hydraulic System - Steering
    Steering System - Circuit - - Pilot, load sensing
    Steering System - Pump - - Variable displacement piston
    Maximum Flow at 2,200 rpm - - 38.8 gal/min
    Relief Valve Setting - Steering - - 4003 psi
    Total Steering Angle - - 72°
    Steering Cycle Times - High Idle - - 3 s
    Steering Cycle Times - Low Idle - - 8.2 s

    Axles
    Front - - Planetary – Fixed
    Rear - - Planetary – Oscillating
    Oscillation Angle - - ±10°

    Braking System
    Service Brakes - - Single Disc Wet (enclosed) 4 WHL
    Parking Brake - - Drum and Shoe, Spring Applied, Hydraulic Released

    Dimensions (Approximate)
    Height to Top of Beacon - - 13.1 ft
    Height - Top of Cab - - 12.1 ft
    Height - Top of Exhaust Pipe - - 11.3 ft
    Height - Top of Hood - - 8.7 ft
    Height to Top of Radiator Guard - - 8 ft
    Ground Clearance to Hitch - - 1.4 ft
    Ground Clearance to Transmission Guard - - 1.4 ft
    Ground Clearance to Bottom of Bumper - - 2.3 ft
    Centerline of Rear Axle to Bumper - - 6.5 ft
    Centerline of Front Axle to Hitch - - 5.5 ft
    Wheel Base - - 11 ft
    Width over Platform - - 10.3 ft
    Overall Length to Front Tire - - 21 ft
    Overall Machine Length with Straight Blade - - 23.6 ft
    Overall Machine Length with Coal Blade - - 25.5 ft

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 111 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A)

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 109 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A).

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 112 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A).

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 110 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A).
    Add a Similar Product: