Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Rated horsepower at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a
-
Power Train
Hydrostatic
-
-
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
-
Net Power - Rated - ISO 9249/SAE J1349
-
215 HP
-
Net Power (Rated) - ISO 9249 (DIN)
-
219 mhp
-
Emissions
-
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V
-
Note (3)
-
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
-
Note (4)
-
Machine Build Number 20B
-
Weights
Operating Weight
20640 lb
50733 lb
-
Operating Weight - LGP
21369 lb
-
-
Operating Weight - LGP, 762 mm/30 in
21810 lb
-
-
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
-
-
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
-
-
Transmission
Drive Pumps
1
-
-
Maximum Travel Speed - Forward
5.6 mile/h
-
-
Maximum Travel Speed - Reverse
6.2 mile/h
-
-
Track Motors
2
-
-
Relief Valve Settings
7033 psi
-
-
Power Train
-
Fully Automatic 4-Speed Powershift
-
Hydraulic Controls
Pump Output
17.2 gal/min
-
-
Relief Valve Settings
2988 psi
-
-
Ripper
Type
Parallelogram
-
-
Number of Shanks
3
-
-
Height
6.5 in
-
-
Weight
1222 lb
-
-
Maximum Digging Depth
13.3 in
-
-
Maximum Reach - Ground Line
30.2 in
-
-
Overall Width
67.3 in
-
-
Maximum Ground Clearance Under Tip
17.6 in
-
-
Undercarriage
Ground Pressure - LGP
4.5 psi
-
-
Track Gauge - LGP
69 in
-
-
Length - Track on Ground - LGP
91 in
-
-
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
40
-
-
Ground Pressure - LGP, 762 mm (30 in)
3.9 psi
-
-
Length - Track on Ground - LGP, 762 mm (30 in)
91 in
-
-
Shoe Width - LGP
26 in
-
-
Shoe Width - LGP, 762 mm (30 in)
30 in
-
-
Track Gauge
63 in
-
-
Number of Rollers - Each Side
7
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
Ground Pressure
5.7 psi
-
-
Length of Track on Ground
91 in
-
-
Number of Shoes - Each Side - Abrasion Undercarriage
36
-
-
Shoe Width - Standard
20 in
-
-
Service Refill Capacities
Cooling System
5 gal (US)
-
-
Final Drive - Each - LGP
2.6 gal (US)
-
-
Crankcase - With Filter
2.8 gal (US)
-
-
Transmission - Hydraulic Tank
23.8 gal (US)
-
-
Fuel Tank
51.5 gal (US)
90 gal (US)
-
Final Drives - Each Side
2.6 gal (US)
-
-
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)
-
-
DEF Tank
-
7.4 gal (US)
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.
-
Dimensions
BLADE: Blade Width - LGP
126.7 in
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
BLADE: Digging Depth - LGP
23.2 in
-
-
Track Gauge - LGP
67.9 in
-
-
BLADE: Blade Capacity (SAE) - LGP
3.06 yd³
-
-
BLADE: Blade Width at Maximum Angle - LGP
115.8 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
-
-
Ground Clearance - LGP, 762 mm (30 in)
13 in
-
-
BLADE: Blade Height - LGP
39.8 in
-
-
BLADE: Blade Lift Height - LGP
30.2 in
-
-
Ground Clearance - LGP
13 in
-
-
Overall Length - With Blade - LGP, 762 mm (30 in)
169.6 in
-
-
Overall Length - With Blade - LGP
169.6 in
-
-
Note
Abrasion Undercarriage
-
-
BLADE: Maximum Tilt - LGP
17.7 in
-
-
BLADE: Maximum Angle (either side) - LGP
25°
-
-
BLADE: Blade Capacity (SAE) - Standard
2.86 yd³
-
-
Track Gauge - Standard
63 in
-
-
BLADE: Digging Depth - Standard
23.8 in
-
-
BLADE: Blade Lift Height - Standard
30.2 in
-
-
Ground Clearance - Standard
13 in
-
-
Overall Length - With Blade - Standard
170.7 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
52° to 58°
-
-
BLADE: Blade Height - Standard
42.2 in
-
-
BLADE: Maximum Tilt - Standard
15.8 in
-
-
BLADE: Blade Width - Standard
109.5 in
-
-
BLADE: Blade Width at Maximum Angle - Standard
103.8 in
-
-
BLADE: Maximum Angle (either side) - Standard
25°
-
-
Length of Basic Dozer (without blade) - Standard
128.7 in
-
-
Dozer Height - Standard
109 in
-
-
Width of Dozer (standard shoes, no blade) - LGP
92.9 in
-
-
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
103.5 in
-
-
Length of Basic Dozer (without blade) - LGP
128.7 in
-
-
Dozer Height - LGP, 762 mm (30 in)
109 in
-
-
Width of Dozer (standard shoes, no blade) - Standard
83 in
-
-
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)