CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    992 Wheel Loader
    View Product
    982 XE
    View Product Remove
    980
    View Product Remove

    Engine
    Net Power 814 HP - -
    Engine Model Cat® C32B Cat C13 Cat C13
    Emissions U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent - -
    Rated Speed 1750 rpm - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard 900 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient 937 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard 907 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient 944 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard 884 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient 921 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard 893 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient 931 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard 814 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient 814 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard 823 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient 823 HP - -
    Bore 5.7 in - -
    Stroke 6.4 in - -
    Displacement 1963.5 in³ 12.5L 12.5 L
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm 3514 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm 3555 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm 3537 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm 3570 ft·lbf - -
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - 404 HP 393 HP
    Note (1) - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
    Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Engine Power @ 1,700 rpm – ISO 14396:2002 - 432 HP 429 HP
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - 1636 lb/ft 1627 lb/ft
    Gross Power @ 1,700 rpm – SAE J1995:2014 - 436 HP 425 HP
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - 1515 lb/ft 1539 lb/ft
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - 1620 lb/ft 1612 lb/ft
    Note (3) - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h

    Operating Specifications
    Operating Weight 233430 lb - -
    Rated Payload - Standard 25.5 ton (US) - -
    Rated Payload - Standard (Material Handler) 30 ton (US) - -
    Rated Payload - High Lift 22.5 ton (US) - -
    Rated Payload - High Lift (Material Handler) 27 ton (US) - -
    Bucket Capacity Range 11.5-24.5 m³ (15-32 yd³) - -
    Cat Truck Match - Standard 775/777 - -
    Cat Truck Match - High Lift 785 - -
    Breakout Force - 59060 lbf 51008 lb
    Note (1) - For a machine configuration as defined under Weight. For a machine configuration as defined under �Weight.�
    Note (2) - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Static Tipping Load - Full 40° Turn - No Tire Deflection - 22418 kg 20965 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - 46526 lb 43432 lb

    Buckets
    Bucket Capacities 11.5-24.5 m³ (15-32 yd³) - -

    Transmission
    Transmission Type Cat Planetary Powershift - -
    Forward - 1 4.3 mile/h 3.9 mile/h 4.3 mile/h
    Forward - 2 7.4 mile/h 7.3 mile/h 8.3 mile/h
    Forward - 3 12.7 mile/h 13 mile/h 14.6 mile/h
    Direct Drive - Forward 1 Disabled - -
    Direct Drive - Forward 2 8 mile/h - -
    Direct Drive - Forward 3 14 mile/h - -
    Reverse - 1 4.7 mile/h 4.4 mile/h 4.8 mile/h
    Reverse - 2 8.1 mile/h 8.4 mile/h 9.4 mile/h
    Reverse - 3 13.9 mile/h 17.4 mile/h 16.7 mile/h
    Direct Drive - Reverse 1 5 mile/h - -
    Direct Drive - Reverse 2 8.8 mile/h - -
    Direct Drive - Reverse 3 15.3 mile/h - -
    Forward - 4 - 24.5 mile/h 24.5 mile/h
    Note - Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
    Reverse - 4 - - 24.5 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Positive Flow Control - -
    Lift/Tilt System - Pump Variable Displacement Piston - -
    Maximum Flow at 2,165 rpm 250 gal/min - -
    Relief Valve Setting - Lift/Tilt 5000 psi - -
    Lift Cylinder - Bore 9.3 in - -
    Lift Cylinder - Stroke 63.5 in - -
    Tilt Cylinder - Bore 11.5 in - -
    Tilt Cylinder - Stroke 41.5 in - -

    Hydraulic Cycle Times
    Rack Back 2.3 s - -
    Rack Back - High Lift 2.3 s - -
    Raise 9 s - -
    Raise - High Lift 9 s - -
    Dump 2.6 s - -
    Dump - High Lift 2.6 s - -
    Float Down 3.2 s - -
    Float Down - High Lift 3.2 s - -
    Total Hydraulic Cycle Time 17.1 s - -

    Service Refill Capacities
    Fuel Tank 385.7 gal (US) 112.5 gal (US) 112.5 gal (US)
    Cooling Systems 59.4 gal (US) - -
    Crankcase 31.7 gal (US) 9.8 gal (US) 9.8 gal (US)
    Transmission 51.5 gal (US) 20.3 gal (US) 20.3 gal (US)
    Differential - Final Drives - Front 96.4 gal (US) 24.3 gal (US) 22.2 gal (US)
    Differential - Final Drives - Rear 96.4 gal (US) 24.3 gal (US) 22.4 gal (US)
    Hydraulic System Factory Fill (Implement) 104.1 gal (US) - -
    Hydraulic Tank - Implement 60.2 gal (US) - -
    Hydraulic Factory Fill (Steering) 32.5 gal (US) - -
    Hydraulic Tank (Steering Tank Only) 26.3 gal (US) - -
    Cooling System - 13.7 gal (US) 13.7 gal (US)
    DEF Tank - 5.5 gal (US) 5.5 gal (US)
    Hydraulic Tank - 40.4 gal (US) 40.4 gal (US)

    Axles
    Front Fixed - -
    Rear Trunnion - -
    Oscillation Angle ±9° - -

    Brakes
    Brakes ISO 3450:2011 - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, Load Sensing - -
    Steering System - Pump Piston, Variable Displacement - -
    Maximum Flow at 1,400-1,850 rpm 70 gal/min - -
    Steering Cut Off Pressure 4500 psi - -
    Total Steering Angle 80° - -
    Steering Cycle Times - Low Idle 4.9 s - -
    Steering Cycle Times - High Idle 3.1 s - -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4 °F - -
    Ambient Capability, Hydraulically Driven Demand Fan - High 131 °F - -

    Sound Performance - Standard
    Note Machine Sound Level (ISO 6396:2008) - 116 dB(A) - -

    Sound Performance - Suppression
    Note Machine Sound Level (ISO 6396:2008) - 113 dB(A) - -

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks 17 ft - -
    Ground to Top of ROPS 18.3 ft - -
    Ground to Top of Hood 13.1 ft - -
    Ground to Center of Front Axle 4.3 ft - -
    Ground to Bumper Clearance 3.8 ft - -
    Ground to Lower Hitch Clearance 2.2 ft - -
    Reach - Maximum Lift 8.2 ft - -
    Clearance at Maximum Lift 15.2 ft - -
    B-Pin Height - Maximum Lift 22.8 ft - -
    Maximum Overall Height - Bucket Raised 30.8 ft - -
    Rear Axle - Centerline to Bumper 13.5 ft - -
    Tread Width 10.83 ft - -
    Rack Back Angle - Maximum Lift 56.9 degrees - -
    Dump Angle at Maximum Lift -49.5 degrees - -
    Rack Back Angle - Ground Level 40.2 degrees - -
    Width - Over Tires - With Bulge 14.74 ft - -
    Rack Back Angle - Carry 48.9 degrees - -
    Wheel Base 19.3 ft - -
    Maximum Overall Length 50.8 ft - -
    Front Axle Centerline to Bucket Tip 18 ft - -

    Dimensions - High Lift - Approximate
    Tread Width 10.83 ft - -
    Rack Back Angle - Ground Level 42.5 degrees - -
    Dump Angle at Maximum Lift -48.1 degrees - -
    Rack Back Angle - Maximum Lift 56.2 degrees - -
    Width - Over Tires - With Bulge 14.75 ft - -
    Rack Back Angle - Carry 51.6 degrees - -
    Ground to Top of Exhaust Stacks 17 ft - -
    Ground to Top of ROPS 18.3 ft - -
    Ground to Top of Hood 13.1 ft - -
    Ground to Center of Front Axle 4.3 ft - -
    Ground to Bumper Clearance 3.8 ft - -
    Ground to Lower Hitch Clearance 2.2 ft - -
    Reach - Maximum Lift 7.6 ft - -
    Clearance at Maximum Lift 17.2 ft - -
    B-Pin Height - Maximum Lift 24.5 ft - -
    Maximum Overall Height - Bucket Raised 32 ft - -
    Rear Axle - Centerline to Bumper 13.5 ft - -
    Wheel Base 19.3 ft - -
    Maximum Overall Length 51.6 ft - -
    Front Axle Centerline to Bucket Tip 18.8 ft - -

    Weights
    Operating Weight - 78264 lb 66877 lb
    Note - Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s

    Bucket Capacities
    Bucket Range - 4.8-17.2 m³ 6.25-22.5 yd³ 4.0-14.5 m³ 5.25-19 yd³

    Sound
    Note (1) - * For machines in European Union countries and in countries that adopt the “EU Directives.” ** For machines in European Union countries and in countries that adopt the �EU Directives.�
    Note (2) - European Union Directive “2000/14/EC” as amended by “2005/88/EC.” ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - 107 109
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - 70 dB(A) 72 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - 110 dB(A) 112 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - 75 78
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - 70 dB(A) 72 dB(A)

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

    Hydraulic System
    Implement System - Maximum Operating Pressure - 4975 psi 4975 psi
    Implement System - Maximum Pump Output at 2,250 rpm - 119 gal/min 119 gal/min
    Hydraulic Cycle Time - Total - 10.1 seconds -

    Dimensions
    Note - All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - 9.4 ft 8.9 ft
    Centerline of Rear Axle to Hitch - 6.3 ft 6.3 ft
    Ground Clearance - 1.4 ft 1.5 ft
    Height - Top of Exhaust Pipe - 12.4 ft 12.5 ft
    Height - Top of Hood - 10 ft 10.1 ft
    Height - Top of ROPS - 12.6 ft 12.7 ft
    Hinge Pin Height at Carry - 2.11 ft 2.2 ft
    Hinge Pin Height at Maximum Lift - 16.1 ft 15.7 ft
    Lift Arm Clearance at Maximum Lift - 13.4 ft 13.6 ft
    Overall Length - Without Bucket - 29.11 ft 27.5 ft
    Tread Width - 8.4 ft 8 ft
    Wheel Base - 12.6 ft 12.6 ft
    Width over Tires (Loaded) - 11.5 ft 10.9 ft
    Rack Back at Ground - - 40 degrees
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight - 8.95 ft 2661 mm
    Centerline of Rear Axle to Hitch - 6.3 ft 6.3 ft
    Ground Clearance - 428 mm 456 mm
    Height - Top of Exhaust Pipe - 3736 mm 3764 mm
    Height - Top of Hood - 3036 mm 3064 mm
    Height - Top of ROPS - 3801 mm 3829 mm
    Hinge Pin Height at Carry - 2.7 ft 2.2 ft
    Hinge Pin Height at Maximum Lift - 4741 mm 4554 mm
    Lift Arm Clearance at Maximum Lift - 3902 mm 3881 mm
    Overall Length - Without Bucket - 8597 mm 8155 mm
    Tread Width - 8.4 ft 8 ft
    Wheel Base - 3800 mm 3800 mm
    Width over Tires (Loaded) - 11.5 ft 10.9 ft
    Rack Back at Ground - - 40 degrees
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees
    Add a Similar Product: