980

980

360° View

Video

Product description

The Cat® 980 Wheel Loader brings premium performance with simple to-use technologies as a standard offering, boosting operator efficiencies and delivering increased productivity. Improved performance, reliability, durability, and versatility result in a machine that is better built to meet your

Engine

Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - 393HP
Engine Model - Cat C13
Note (1) - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Gross Torque @ 1,200 rpm – SAE J1995:2014 - 1627lb/ft
Displacement - 12.5 L
Engine Torque @ 1,200 rpm – ISO 14396:2002 - 1612lb/ft
Gross Power @ 1,700 rpm – SAE J1995:2014 - 425HP
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - 1539lb/ft
Engine Power @ 1,700 rpm – ISO 14396:2002 - 429HP
Note (3) - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h

Weights

Operating Weight - 66877lb
Note - Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s

Bucket Capacities

Bucket Range - 4.0-14.5 m³ 5.25-19 yd³

Transmission

Forward - 1 - 4.3mile/h
Forward - 2 - 8.3mile/h
Forward - 3 - 14.6mile/h
Forward - 4 - 24.5mile/h
Note - Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
Reverse - 1 - 4.8mile/h
Reverse - 2 - 9.4mile/h
Reverse - 3 - 16.7mile/h
Reverse - 4 - 24.5mile/h

Sound

Note (1) - ** For machines in European Union countries and in countries that adopt the �EU Directives.�
Note (2) - ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - 109
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - 72dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - 112dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - 78
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - 72dB(A)

Air Conditioning System

Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

Operating Specifications

Breakout Force - 51008lb
Note (1) - For a machine configuration as defined under �Weight.�
Note (2) - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection - 20965kg
Static Tipping Load - Full 40° Turn - With Tire Deflection - 43432lb

Service Refill Capacities

Cooling System - 13.7gal (US)
Crankcase - 9.8gal (US)
DEF Tank - 5.5gal (US)
Differential - Final Drives - Front - 22.2gal (US)
Differential - Final Drives - Rear - 22.4gal (US)
Fuel Tank - 112.5gal (US)
Hydraulic Tank - 40.4gal (US)
Transmission - 20.3gal (US)

Hydraulic System

Implement System - Maximum Operating Pressure - 4975psi
Implement System - Maximum Pump Output at 2,250 rpm - 119gal/min

Dimensions

Note - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

Dimensions - High Lift

Centerline of Rear Axle to Edge of Counterweight - 8.9ft
Centerline of Rear Axle to Hitch - 6.3ft
Ground Clearance - 1.5ft
Height - Top of Exhaust Pipe - 12.5ft
Height - Top of Hood - 10.1ft
Height - Top of ROPS - 12.7ft
Hinge Pin Height at Carry - 2.2ft
Hinge Pin Height at Maximum Lift - 15.7ft
Lift Arm Clearance at Maximum Lift - 13.6ft
Overall Length - Without Bucket - 27.5ft
Tread Width - 8ft
Wheel Base - 12.6ft
Rack Back at Ground - 40 degrees
Width over Tires (Loaded) - 10.9ft
Rack Back - Carry Height - 50 degrees
Rack Back - Maximum Lift - 61 degrees

Dimensions - Standard Lift

Centerline of Rear Axle to Hitch - 6.3ft
Ground Clearance - 456mm
Height - Top of Exhaust Pipe - 3764mm
Height - Top of Hood - 3064mm
Height - Top of ROPS - 3829mm
Hinge Pin Height at Carry - 2.2ft
Hinge Pin Height at Maximum Lift - 4554mm
Lift Arm Clearance at Maximum Lift - 3881mm
Overall Length - Without Bucket - 8155mm
Tread Width - 8ft
Wheel Base - 3800mm
Rack Back at Ground - 40 degrees
Width over Tires (Loaded) - 10.9ft
Centerline of Rear Axle to Edge of Counterweight - 2661mm
Rack Back - Carry Height - 50 degrees
Rack Back - Maximum Lift - 61 degrees

Standard Equipment:

Operator Environment
- Cab, pressurized, sound suppression
- EH implement controls, parking brake
- Steering, joystick
- Seat, cloth, air suspension
- Touchscreen display
- Visibility: mirrors, rear-vision camera
- Air conditioner, heater, defroster (auto temp, fan)
- Sun visor, front, retractable
- Sun visor, rear, retractable
- Window cleaning platform, front
- Windows, front, safety laminated rounded glass
On-board Technologies
- Cat Payload scale
- Autodig with Auto Set Tires
- Operator ID & machine security
- Application Profiles
- Job Aids
- Controls Help and eOMM
Power Train
- Cat C13 engine
- Electric fuel priming pump
- Fuel-water separator and secondary fuel filter
- Engine, air precleaner
- Axles, open differentials
- Transmission, planetary, automatic powershift
- Torque converter with lock-up
- Service brakes, hydraulic, fully enclosed wet disc, wear indicators
- Integrated Braking System (IBS)
- Park brake, caliper on front axles, spring applied-pressure released
Hydraulics
- Implement system, load sensing with variable displacement piston pump
- Steering system, load sensing with dedicated variable displacement piston pump
- Ride control, dual accumulators
- Oil sampling valves, Cat XT^™ hoses
Electrical
- Starting and charging system, 24V
- Starter, electric, heavy duty
- Lights: halogen, 4 work lights, 2 front roading lights with turn signals, 2 rearvision lights
Monitoring System
- Front dash with analog gauges, LCD display, and warning lights
- Primary touchscreen monitor (Cat Payload, quad screens, machine settings & messages)
Linkage
- Standard lift, Z-bar
- Kickouts: lift and tilt

Optional Equipment:

Operator Environment
- Door, remote opening system
- HMU steering wheel
- Entertainment radio (FM, AM, USB, BT)
- Entertainment radio (DAB+)
- CB radio ready
- Seat, suede/cloth, air suspension, heated
- Seat, leather/cloth, air suspension, heated/ cooled
- 360° vision system
- Cat Detect rear radar system
- Dedicated rearview screen
- Mirrors, heated
- Windows, front, heavy duty, or full guards
On-board Technologies
- Cat Advanced Payload
- Cat Payload Printer
Power Train
- Turbine, air precleaner
- Radiator, high debris
- Cooling fan, reversible
- Axles, limited slip differential(s)
- Axles, ecology drains, AOC ready, extreme temperature seals
- Axles, oil cooler
- Heavy Duty transmission
Hydraulics
- 3rd auxiliary function with ride control
- Quick coupler control
Electrical
- Cold start, 120V or 240V
- Lights: LED
- Warning beacon
Monitoring System
- Reversing strobe lights
Linkage
- High lift, Z-bar
Additional Equipment
- Cat Autolube system
- Fenders, extensions or roading
- Guards: power train, crankcase, cab, cylinders, rear
- Biodegradable hydraulic oil
- High-speed oil change system
- Rear cab access
- Fast fill fuel tank
- Toolbox
- Wheel chocks
- Secondary steering system, electrical
Special Configurations
- Aggregate handler
- Waste and industrial
- Forestry, logger
- Steel mill
- Block handler