|
950 GC Wheel Loader | Front Loader
|
|
|
Engine |
Net Power - ISO 9249 |
225 HP |
- |
- |
Emissions |
Tier 4/Stage V |
- |
U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent |
Note |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons). |
- |
- |
Bore |
4.13 in |
- |
5.4 in |
Stroke |
5.31 in |
- |
6 in |
Displacement |
428 in³ |
12.5L |
1649.5 in³ |
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric |
228 HP |
- |
- |
Maximum Power - 1,700 rpm - ISO 14396 |
240 HP |
- |
- |
Maximum Power - 1,700 rpm - ISO 14396 - Metric |
243 HP |
- |
- |
Peak Gross Torque - 1,400 rpm - SAE J1995 |
811 ft·lbf |
- |
- |
Peak Gross Torque - 1,400 rpm - ISO 14396 |
805 ft·lbf |
- |
- |
Engine Model |
Cat C7.1 |
Cat C13 |
C27 Cat® |
Maximum Net Power - 1,700 rpm - ISO 9249 |
225 HP |
- |
- |
Maximum Net Power - 1,700 rpm - SAE J1349 |
225 HP |
- |
- |
Maximum Power - 1,700 rpm - SAE J1995 |
241 HP |
- |
- |
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 |
- |
404 HP |
- |
Note (1) |
- |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
- |
Note (2) |
- |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
- |
Engine Power @ 1,700 rpm – ISO 14396:2002 |
- |
432 HP |
- |
Gross Torque @ 1,200 rpm – SAE J1995:2014 |
- |
1636 lb/ft |
- |
Gross Power @ 1,700 rpm – SAE J1995:2014 |
- |
436 HP |
- |
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 |
- |
1515 lb/ft |
- |
Engine Torque @ 1,200 rpm – ISO 14396:2002 |
- |
1620 lb/ft |
- |
Note (3) |
- |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
- |
Rated Speed |
- |
- |
1,800/min |
Engine Power - ISO 14396 |
- |
- |
752 HP |
Gross Power - SAE J1995 |
- |
- |
766 HP |
Net Power - SAE J1349 - Standard Ambient |
- |
- |
699 HP |
Net Power - SAE J1349 - High Ambient |
- |
- |
648 HP |
Peak Torque - 1,200 rpm |
- |
- |
2624 lb/ft |
Torque Rise |
- |
- |
18 % |
Weights |
Operating Weight |
41554 lb |
78264 lb |
- |
Note |
- |
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun |
- |
Buckets |
Bucket Capacities |
2.9-4.4 m³ (3.75-5.75 yd³) |
- |
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) |
Sound |
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) |
76 dB(A)* |
- |
- |
Note (1) |
*Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
* For machines in European Union countries and in countries that adopt the “EU Directives.” |
- |
With Cooling Fan Speed at 70% of Maximum Value: Note (2) |
European Union Directive "2000/14/EC" as amended by "2005/88/EC." |
- |
- |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** |
73 dB(A) |
- |
- |
With Cooling Fan Speed at 70% of Maximum Value: Note (1) |
For machines in European Union countries and in countries that adopt the EU Directives |
- |
- |
With Cooling Fan Speed at Maximum Value - Note |
Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
- |
- |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** |
107 LWA*** |
- |
- |
Note (3) |
***European Union Directive "2000/14/EC" as amended by "2005/88/EC." |
- |
- |
Note (2) |
**For machines in European Union countries and in countries that adopt the "EU Directives." |
European Union Directive “2000/14/EC” as amended by “2005/88/EC.” |
- |
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) |
73 dB(A) |
- |
- |
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) |
109 dB(A) |
- |
- |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* |
- |
107 |
- |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) |
- |
70 dB(A) |
- |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) |
- |
110 dB(A) |
- |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) |
- |
75 |
- |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) |
- |
70 dB(A) |
- |
Dimensions |
Rack Back - Ground |
40 degrees |
- |
- |
Height - Top of Exhaust Pipe |
11.17 ft |
- |
- |
Centerline of Rear Axle to Hitch |
5.42 ft |
- |
- |
Lift Arm Clearance |
12 ft |
- |
- |
B-Pin Height |
13.75 ft |
- |
- |
Centerline of Rear Axle to Edge of Counterweight |
6.75 ft |
- |
- |
Ground Clearance |
1.5 ft |
- |
- |
Rack Back - Maximum Lift |
60 degrees |
- |
- |
Height - Top of Hood |
8.75 ft |
- |
- |
Wheel Base |
10.83 ft |
- |
- |
Height - Top of ROPS |
11.33 ft |
- |
- |
Rack Back - Carry |
45 degrees |
- |
- |
Note |
All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires. |
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
- |
Weights and Operating Specifications |
Note (2) |
*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
- |
- |
Tipping Load - Full Turn - Rigid Tires** |
25875 lb |
- |
- |
Breakout Force |
34638 lbf |
- |
- |
Tipping Load - Full Turn - ISO 14397-1* |
24264 lb |
- |
- |
Note (3) |
**Compliance to ISO (2007) 14397-1 Sections 1 thru 5. |
- |
- |
Operating Weight |
41554 lb |
- |
- |
Note (1) |
For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound |
- |
- |
Transmission |
Note |
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius. |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. |
Reverse - 3 |
14.2 mile/h |
17.4 mile/h |
15.5 mile/h |
Forward - 3 |
14.2 mile/h |
13 mile/h |
14.2 mile/h |
Forward - 1 |
4.5 mile/h |
3.9 mile/h |
4.5 mile/h |
Forward - 2 |
8 mile/h |
7.3 mile/h |
8.3 mile/h |
Forward - 4 |
22.4 mile/h |
24.5 mile/h |
- |
Reverse - 2 |
8 mile/h |
8.4 mile/h |
9.1 mile/h |
Reverse - 1 |
4.5 mile/h |
4.4 mile/h |
4.9 mile/h |
Transmission Type |
- |
- |
Cat planetary power shift |
Direct Drive - Forward 1 |
- |
- |
Lock-up disabled |
Direct Drive - Forward 2 |
- |
- |
8.5 mile/h |
Direct Drive - Forward 3 |
- |
- |
15.2 mile/h |
Direct Drive - Reverse 1 |
- |
- |
5.4 mile/h |
Direct Drive - Reverse 2 |
- |
- |
9.6 mile/h |
Direct Drive - Reverse 3 |
- |
- |
16.4 mile/h |
Hydraulic System |
Hydraulic Cycle Time - Total Cycle Time |
9.4 s |
- |
- |
Steering System - Pump Type |
Piston |
- |
- |
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min) |
4047 psi |
- |
- |
Implement System - Maximum Pump Output at 2,390 rpm |
68 gal/min |
- |
- |
Implement System - Maximum Operating Pressure |
- |
4975 psi |
- |
Implement System - Maximum Pump Output at 2,250 rpm |
- |
119 gal/min |
- |
Hydraulic Cycle Time - Total |
- |
10.1 seconds |
- |
Service Refill Capacities |
DEF Tank |
4.2 gal (US) |
5.5 gal (US) |
- |
Transmission |
11.9 gal (US) |
20.3 gal (US) |
29.1 gal (US) |
Fuel Tank Size |
76.6 gal (US) |
- |
- |
Cooling System |
13.2 gal (US) |
13.7 gal (US) |
54.9 gal (US) |
Differential - Final Drives - Rear |
10 gal (US) |
24.3 gal (US) |
68.9 gal (US) |
Differential - Final Drives - Front |
10.6 gal (US) |
24.3 gal (US) |
71.6 gal (US) |
Crankcase |
4.8 gal (US) |
9.8 gal (US) |
- |
Hydraulic Tank |
29.6 gal (US) |
40.4 gal (US) |
- |
Fuel Tank |
- |
112.5 gal (US) |
294.3 gal (US) |
Engine Crankcase |
- |
- |
20 gal (US) |
Hydraulic System Factory Fill |
- |
- |
210 gal (US) |
Hydraulic Tank - Implement and Hydraulic Fan |
- |
- |
68.9 gal (US) |
Hydraulic Tank - Steering and Braking |
- |
- |
34.9 gal (US) |
Note |
- |
- |
All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l |
Engine - Tier 4 Final/Stage IV |
Emissions |
Tier 4/Stage IV |
- |
- |
Bucket Capacities |
Bucket Range |
- |
4.8-17.2 m³ 6.25-22.5 yd³ |
- |
Air Conditioning System |
Air Conditioning |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons). |
Operating Specifications |
Breakout Force |
- |
59060 lbf |
- |
Note (1) |
- |
For a machine configuration as defined under Weight. |
- |
Note (2) |
- |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
- |
Static Tipping Load - Full 40° Turn - No Tire Deflection |
- |
22418 kg |
- |
Static Tipping Load - Full 40° Turn - With Tire Deflection |
- |
46526 lb |
- |
Operating Weight |
- |
- |
178517 lb |
Rated Payload - Standard |
- |
- |
17.5 ton (US) |
Rated Payload - High Lift |
- |
- |
17.5 ton (US) |
Bucket Capacity Range |
- |
- |
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) |
Cat Truck Match - Standard |
- |
- |
773-775 |
Cat Truck Match - High Lift |
- |
- |
775-777 |
Dimensions - High Lift |
Centerline of Rear Axle to Edge of Counterweight |
- |
9.4 ft |
- |
Centerline of Rear Axle to Hitch |
- |
6.3 ft |
- |
Ground Clearance |
- |
1.4 ft |
- |
Height - Top of Exhaust Pipe |
- |
12.4 ft |
- |
Height - Top of Hood |
- |
10 ft |
- |
Height - Top of ROPS |
- |
12.6 ft |
- |
Hinge Pin Height at Carry |
- |
2.11 ft |
- |
Hinge Pin Height at Maximum Lift |
- |
16.1 ft |
- |
Lift Arm Clearance at Maximum Lift |
- |
13.4 ft |
- |
Overall Length - Without Bucket |
- |
29.11 ft |
- |
Tread Width |
- |
8.4 ft |
- |
Wheel Base |
- |
12.6 ft |
- |
Width over Tires (Loaded) |
- |
11.5 ft |
- |
Dimensions - Standard Lift |
Centerline of Rear Axle to Edge of Counterweight |
- |
8.95 ft |
- |
Centerline of Rear Axle to Hitch |
- |
6.3 ft |
- |
Ground Clearance |
- |
428 mm |
- |
Height - Top of Exhaust Pipe |
- |
3736 mm |
- |
Height - Top of Hood |
- |
3036 mm |
- |
Height - Top of ROPS |
- |
3801 mm |
- |
Hinge Pin Height at Carry |
- |
2.7 ft |
- |
Hinge Pin Height at Maximum Lift |
- |
4741 mm |
- |
Lift Arm Clearance at Maximum Lift |
- |
3902 mm |
- |
Overall Length - Without Bucket |
- |
8597 mm |
- |
Tread Width |
- |
8.4 ft |
- |
Wheel Base |
- |
3800 mm |
- |
Width over Tires (Loaded) |
- |
11.5 ft |
- |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
- |
Positive flow control |
Lift/Tilt System |
- |
- |
Variable displacement piston |
Maximum Flow at 1,800 rpm (1) |
- |
- |
240 gal/min |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
- |
235 mm × 1287 mm (9.3 in × 50.7 in) |
Cylinders, Double Acting - Tilt, Bore and Stroke |
- |
- |
292.1 mm × 820 mm (11.5 in × 32.3 in) |
Pilot System |
- |
- |
Open loop and pressure reducing |
Relief Valve Setting - Main |
- |
- |
507 psi |
Relief Valve Setting - Lift/Tilt |
- |
- |
4786 psi |
Hydraulic Cycle Times |
Rack Back |
- |
- |
4.3 s |
Raise |
- |
- |
8.2 s |
Dump |
- |
- |
2.9 s |
Lower |
- |
- |
3.7 s |
Lower Float Down |
- |
- |
3.6 s |
Total Hydraulic Cycle Time - Empty Bucket |
- |
- |
13.8 s |
Hydraulic System - Steering |
Steering System - Circuit |
- |
- |
Pilot, load sensing |
Steering System - Pump |
- |
- |
Piston, variable displacement |
Maximum Flow at 1,400 rpm |
- |
- |
96.2 gal/min |
Relief Valve Setting - Steering |
- |
- |
5004 psi |
Total Steering Angle |
- |
- |
70° |
Axles |
Front |
- |
- |
Fixed |
Rear |
- |
- |
Trunnion |
Oscillation Angle |
- |
- |
8.5° |
Brakes |
Brakes |
- |
- |
ISO 3450: 2011 |
Sound Performance - Standard |
Operator Sound Level (ISO 6396:2008) |
- |
- |
65.5 dB(A) |
Machine Sound Level (ISO 6395:2008) |
- |
- |
115 dB(A) |
Sound Performance - Suppression |
Operator Sound Level (ISO 6396:2008) |
- |
- |
65.5 dB(A) |
Machine Sound Level (ISO 6395:2008) |
- |
- |
113 dB(A) |