The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).
-
-
Bore
4.13 in
-
-
Stroke
5.31 in
-
-
Displacement
428 in³
12.5L
-
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric
228 HP
-
-
Maximum Power - 1,700 rpm - ISO 14396
240 HP
-
-
Maximum Power - 1,700 rpm - ISO 14396 - Metric
243 HP
-
-
Peak Gross Torque - 1,400 rpm - SAE J1995
811 ft·lbf
-
-
Peak Gross Torque - 1,400 rpm - ISO 14396
805 ft·lbf
-
-
Engine Model
Cat C7.1
Cat C13
-
Maximum Net Power - 1,700 rpm - ISO 9249
225 HP
-
-
Maximum Net Power - 1,700 rpm - SAE J1349
225 HP
-
-
Maximum Power - 1,700 rpm - SAE J1995
241 HP
-
-
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
-
404 HP
-
Note (1)
-
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
-
Note (2)
-
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
Note (3)
-
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
Engine Power @ 1,700 rpm – ISO 14396:2002
-
432 HP
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
-
1636 lb/ft
-
Gross Power @ 1,700 rpm – SAE J1995:2014
-
436 HP
-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
-
1515 lb/ft
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
-
1620 lb/ft
-
Weights
Operating Weight
41554 lb
78264 lb
-
Note
-
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
-
Buckets
Bucket Capacities
2.9-4.4 m³ (3.75-5.75 yd³)
-
-
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
76 dB(A)*
-
-
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
* For machines in European Union countries and in countries that adopt the “EU Directives.”
-
With Cooling Fan Speed at 70% of Maximum Value: Note (2)
European Union Directive "2000/14/EC" as amended by "2005/88/EC."
-
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
73 dB(A)
-
-
With Cooling Fan Speed at 70% of Maximum Value: Note (1)
For machines in European Union countries and in countries that adopt the EU Directives
-
-
With Cooling Fan Speed at Maximum Value - Note
Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
107 LWA***
-
-
Note (3)
***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
-
-
Note (2)
**For machines in European Union countries and in countries that adopt the "EU Directives."
European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
-
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
-
-
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
109 dB(A)
-
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
-
107
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
-
70 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
-
110 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
-
75
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
-
70 dB(A)
-
Dimensions
Rack Back - Ground
40 degrees
-
-
Height - Top of Exhaust Pipe
11.17 ft
-
-
Centerline of Rear Axle to Hitch
5.42 ft
-
-
Lift Arm Clearance
12 ft
-
-
B-Pin Height
13.75 ft
-
-
Centerline of Rear Axle to Edge of Counterweight
6.75 ft
-
-
Ground Clearance
1.5 ft
-
-
Rack Back - Maximum Lift
60 degrees
-
-
Height - Top of Hood
8.75 ft
-
-
Wheel Base
10.83 ft
-
-
Height - Top of ROPS
11.33 ft
-
-
Rack Back - Carry
45 degrees
-
-
Note
All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
-
Weights and Operating Specifications
Note (2)
*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
-
Tipping Load - Full Turn - Rigid Tires**
25875 lb
-
-
Breakout Force
34638 lbf
-
-
Tipping Load - Full Turn - ISO 14397-1*
24264 lb
-
-
Note (3)
**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
-
-
Operating Weight
41554 lb
-
-
Note (1)
For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound
-
-
Transmission
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
-
Reverse - 3
14.2 mile/h
17.4 mile/h
-
Forward - 3
14.2 mile/h
13 mile/h
-
Forward - 1
4.5 mile/h
3.9 mile/h
-
Forward - 2
8 mile/h
7.3 mile/h
-
Forward - 4
22.4 mile/h
24.5 mile/h
-
Reverse - 2
8 mile/h
8.4 mile/h
-
Reverse - 1
4.5 mile/h
4.4 mile/h
-
Hydraulic System
Hydraulic Cycle Time - Total Cycle Time
9.4 s
-
-
Steering System - Pump Type
Piston
-
-
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)
4047 psi
-
-
Implement System - Maximum Pump Output at 2,390 rpm
68 gal/min
-
-
Implement System - Maximum Operating Pressure
-
4975 psi
-
Implement System - Maximum Pump Output at 2,250 rpm
-
119 gal/min
-
Hydraulic Cycle Time - Total
-
10.1 seconds
-
Service Refill Capacities
DEF Tank
4.2 gal (US)
5.5 gal (US)
-
Transmission
11.9 gal (US)
20.3 gal (US)
-
Fuel Tank Size
76.6 gal (US)
-
-
Cooling System
13.2 gal (US)
13.7 gal (US)
-
Differential - Final Drives - Rear
10 gal (US)
24.3 gal (US)
-
Differential - Final Drives - Front
10.6 gal (US)
24.3 gal (US)
-
Crankcase
4.8 gal (US)
9.8 gal (US)
-
Hydraulic Tank
29.6 gal (US)
40.4 gal (US)
-
Fuel Tank
-
112.5 gal (US)
-
Engine - Tier 4 Final/Stage IV
Emissions
Tier 4/Stage IV
-
-
Bucket Capacities
Bucket Range
-
4.8-17.2 m³ 6.25-22.5 yd³
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
-
Operating Specifications
Breakout Force
-
59060 lbf
-
Note (1)
-
For a machine configuration as defined under Weight.
-
Note (2)
-
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
-
22418 kg
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
