Compare Equipment Go Back
 930M Ag Handler Small Wheel Loader |
 988 GC Wheel Loader |
|
|
Engine |
|||
|---|---|---|---|
| Maximum Gross Power | 168 hp | - | - |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 601 ft·lbf | - | - |
| Stroke - Performance Power Mode: Range 1-4 | 5.3 in | - | - |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | 1800 r/min | - | - |
| Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) | 797 N·m | - | - |
| Displacement (Performance Power Mode: Speed Range 1-4) | 428 in³ | - | - |
| Emissions | Engine meets U.S. EPA Tier 4 Final emission standards. | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 | - |
| Engine Model | Cat® C7.1 | Cat® C15 | - |
| Note (4) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. | - | - |
| Maximum Rated Gross Power - ISO 14396 | 168 hp | - | - |
| Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) | 170 hp | - | - |
| Note (2) | **Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | - | - |
| Note (3) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | - | - |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | 168 hp | - | - |
| Note (1) | *The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards. | - | - |
| Bore (Standard Power Mode: Range 1-4) | 4.1 in | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) | 156 hp | - | - |
| Stroke (Standard Power Mode: Range 1-3**) | 5.3 in | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) | 156 hp | - | - |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**) | 1600 r/min | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 166 hp | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 164 hp | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**) | 158 hp | - | - |
| Bore (Standard Power Mode: Range 1-3**) | 4.1 in | - | - |
| Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | 587 ft·lbf | - | - |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**) | 795 N·m | - | - |
| Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**) | 776 N·m | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 163 hp | - | - |
| Displacement (Standard Power Mode: Range 1-3**) | 428 in³ | - | - |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**) | 160 hp | - | - |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**) | 162 hp | - | - |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**) | 573 ft·lbf | - | - |
| Maximum Rated Gross Power - ISO 14396 (metric) | 170 mhp | - | - |
| Rated Speed | - | 2000 | - |
| Peak Power Speed | - | 1600 | - |
| Engine Power - ISO 14396:2002 | - | 449 hp | - |
| Gross Power - SAE J1995:2014 | - | 456 hp | - |
| Net Power - SAE J1349:2011 | - | 373 hp | - |
| Bore | - | 5.4 in | - |
| Stroke | - | 6.75 in | - |
| Displacement | - | 927 in³ | - |
| Peak Torque - 1,200 rpm - SAE J1995 | - | 1778 ft·lbf | - |
| Torque Rise | - | 16% | - |
Weights |
|||
| Operating Weight | 31382 lb | - | - |
Buckets |
|||
| Bucket Capacities | 2.1-5.0 m³ (2.7-6.5 yd³) | 6.4-7.6 m3 (8.3-10 yd3) | - |
| Bucket Capacities - Light Material | 3.1-5.0 m³ (4.0-6.5 yd³) | - | - |
Cab |
|||
| ROPS | ISO 3471:2008 | - | - |
| FOPS | ISO 3449:2005 Level II | - | - |
| Note (1) | *The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab | - | - |
| Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* | 101 dB(A) | - | - |
| Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* | 68 dB(A) | - | - |
Power Train |
|||
| Front Axle | Fixed | - | - |
| Front Axle - Traction Aid* | Locking differential standard | - | - |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25 | ± 10.5 degrees | - | - |
| Brakes - Service | Inboard wet disc | - | - |
| Rear Axle - Traction Aid | Limited slip differential optional | - | - |
| Brakes - Parking | Spring applied hydraulically released | - | - |
| Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65 | ± 7 degrees | - | - |
| Note | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph). | - | - |
| Rear Axle | Oscillating | - | - |
| Note (2) | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. | - | - |
Tires |
|||
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. | - | - |
| Other Choices Include | 20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX | - | - |
| Standard Size | 20.5 R25, radial (L-3) | - | - |
| Note (2) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. | - | - |
Transmission |
|||
| Reverse - Range 2 | 8 mile/h | - | - |
| Note | Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine | - | - |
| Forward - Range 3 | 17 mile/h | - | - |
| Forward - Range 4 | 25 mile/h | - | - |
| Reverse - Range 3 | 17 mile/h | - | - |
| Reverse - Range 1* | 8 mile/h | - | - |
| Forward - Range 2 | 8 mile/h | - | - |
| Forward - Range 1* | 1-13 km/h (0.6-8 mph) | - | - |
| Reverse - Range 4 | 25 mile/h | - | - |
| Transmission Type | - | Cat planetary power shift | - |
| Forward - 1 | - | 5 mile/h | - |
| Forward - 2 | - | 8 mile/h | - |
| Reverse - 1 | - | 5 mile/h | - |
| Reverse - 2 | - | 8 mile/h | - |
| Direct Drive - Forward 1 | - | Lock-up disabled | - |
| Direct Drive - Forward 2 | - | 8 mile/h | - |
| Direct Drive - Forward 3 | - | 14 mile/h | - |
| Direct Drive - Forward 4 | - | 24 mile/h | - |
| Direct Drive - Reverse 1 | - | Lock-up disabled | - |
| Direct Drive - Reverse 2 | - | 9 mile/h | - |
| Direct Drive - Reverse 3 | - | 16 mile/h | - |
| Direct Drive - Reverse 4 | - | 25.4 mile/h | - |
Loader Hydraulic System |
|||
| Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height) | 1.7 s | - | - |
| Maximum Working Pressure - Implement Pump | 4061 psi | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4351 psi | - | - |
| Note (1) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. | - | - |
| Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift) | 5.7 s | - | - |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50 gal/min | - | - |
| Lift Cylinder: Standard Lift Linkage - Bore Diameter | 4.3 in | - | - |
| Tilt Cylinder: Standard Lift Linkage - Stroke | 21.9 in | - | - |
| Tilt Cylinder: Standard Lift Linkage - Rod Diameter | 2.8 in | - | - |
| Lift Cylinder: Standard Lift Linkage - Rod Diameter | 2.4 in | - | - |
| Tilt Cylinder: Standard Lift Linkage - Bore Diameter | 5.1 in | - | - |
| Lift Cylinder: Standard Lift Linkage - Stroke | 28.7 in | - | - |
| Relief Pressure - Tilt Cylinder | 4351 psi | - | - |
| Cycle Times - 1,600 rpm - Standard: Total Cycle Time | 10.1 s | - | - |
| Maximum Flow - Implement Pump | 50 gal/min | - | - |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42 gal/min | - | - |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
| Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height) | 1.5 s | - | - |
| Note | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display. | - | - |
| Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time | 9.3 s | - | - |
| Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level) | 2.7 s | - | - |
| Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift) | 5.1 s | - | - |
| Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level) | 2.7 s | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 4061 psi | - | - |
Steering |
|||
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | 2.8 s | - | - |
| Steering Articulation Angle - Each Direction | 40° | - | - |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | 2.4 s | - | - |
| Steering Cylinder, Double Acting - Rod Diameter | 1.6 in | - | - |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.5 turns | - | - |
| Maximum Flow - Steering Pump | 34 gal/min | - | - |
| Steering Cylinder, Double Acting - Bore Diameter | 2.8 in | - | - |
| Steering Cylinder, Double Acting - Stroke | 17.2 in | - | - |
| Note (1) | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. | - | - |
| Maximum Working Pressure - Steering Pump | 3500 psi | - | - |
Service Refill Capacities |
|||
| Axles - Front | 6.9 gal (US) | - | - |
| Hydraulic Tank | 23.8 gal (US) | - | - |
| Transmission - Gear Box | 2.2 gal (US) | - | - |
| Cooling System | 7.9 gal (US) | 27 gal (US) | - |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) | - | - |
| Fuel Tank | 51.5 gal (US) | 141 gal (US) | - |
| Axles - Rear | 6.6 gal (US) | - | - |
| Hydraulic System - Including Tank | 43.6 gal (US) | - | - |
| Engine Crankcase | 5.3 gal (US) | 9 gal (US) | - |
| Diesel Exhaust Fluid Tank | - | 5.5 gal (US) | - |
| Transmission | - | 20 gal (US) | - |
| Differential - Final Drives - Front | - | 49 gal (US) | - |
| Differential - Final Drives - Rear | - | 45 gal (US) | - |
| Note | - | Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a | - |
Axles |
|||
| Rear | Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional) | Trunnion | - |
| Front | Fixed; Locking differential (standard) | Fixed | - |
| Oscillation Angle | - | +/-12.5° | - |
Dimensions with Bucket - Standard Lift |
|||
| Height - Ground Clearance** | 1.3 ft | - | - |
| Rack Angle at Carry | 43 ° | - | - |
| Departure Angle | 33 ° | - | - |
| Length - Wheel Base | 9.8 ft | - | - |
| Length - Rear Axle to Bumper | 6.5 ft | - | - |
| Turning Radius - Over Bucket | 19.5 ft | - | - |
| Carry Height - Bucket Pin | 1.3 ft | - | - |
| Width - Over Tires | 8.3 ft | - | - |
| Note (2) | **Vary with tire. | - | - |
| Dig Depth** | 3.9 in | - | - |
| Turning Radius - Outside of Tires | 17.7 ft | - | - |
| Clearance - Level Bucket** | 11.75 ft | - | - |
| Clearance - Bucket at 45°* | 9.1 ft | - | - |
| Rack Angle at Full Lift | 54 ° | - | - |
| Height - Overall** | 17.1 ft | - | - |
| Width - Bucket | 8.4 ft | - | - |
| Height - Ground to Axle Center** | 2.25 ft | - | - |
| Height - Bucket Pin** | 12.8 ft | - | - |
| Operating Weight | 31125 lb | - | - |
| Width - Tread Center | 6.3 ft | - | - |
| Turning Radius - Inside of Tires | 9.4 ft | - | - |
| Reach - Bucket at 45°* | 3.6 ft | - | - |
| Length - Overall* | 24.9 ft | - | - |
| Clearance - Load over Height** | 10.9 ft | - | - |
| Length - Hitch to Front Axle | 4.9 ft | - | - |
| Height - Ground to Beacon** | 12.2 ft | - | - |
| Articulation Angle | 40 ° | - | - |
| Height - Ground to Cab** | 10.9 ft | - | - |
| Note (3) | Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires. | - | - |
| Note (1) | *Vary with bucket. | - | - |
| Dump Angle at Full Lift | 48 ° | - | - |
Dimensions with Bucket - High Lift |
|||
| Length - Rear Axle to Bumper | 6.5 ft | - | - |
| Departure Angle | 33 ° | - | - |
| Height - Overall** | 18.7 ft | - | - |
| Reach - Bucket at 45°* | 4.4 ft | - | - |
| Dump Angle at Full Lift | 48 ° | - | - |
| Width - Bucket | 8.4 ft | - | - |
| Length - Wheel Base | 9.8 ft | - | - |
| Width - Tread Center | 6.3 ft | - | - |
| Length - Hitch to Front Axle | 4.9 ft | - | - |
| Height - Ground to Axle Center** | 2.25 ft | - | - |
| Note (1) | *Vary with bucket. | - | - |
| Clearance - Bucket at 45°* | 10.7 ft | - | - |
| Height - Bucket Pin** | 14.4 ft | - | - |
| Height - Ground to Beacon** | 12.2 ft | - | - |
| Carry Height - Bucket Pin | 1.9 ft | - | - |
| Clearance - Load over Height** | 11.6 ft | - | - |
| Turning Radius - Outside of Tires | 17.7 ft | - | - |
| Turning Radius - Over Bucket | 20.6 ft | - | - |
| Rack Angle at Full Lift | 51 ° | - | - |
| Rack Angle at Carry | 47 ° | - | - |
| Length - Overall* | 27 ft | - | - |
| Note (2) | **Vary with tire. | - | - |
| Height - Ground to Cab** | 10.9 ft | - | - |
| Turning Radius - Inside of Tires | 9.4 ft | - | - |
| Clearance - Level Bucket** | 13.4 ft | - | - |
| Width - Over Tires | 8.3 ft | - | - |
| Note (3) | Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires. | - | - |
| Dig Depth** | 5.3 in | - | - |
| Articulation Angle | 40 ° | - | - |
| Operating Weight | 31441 lb | - | - |
| Height - Ground Clearance** | 1.3 ft | - | - |
Sustainability |
|||
| Recyclability | 94% | 96% | - |
Operating Specifications |
|||
| Full Turn Tip Load | 19424 lb | - | - |
| Operating Weight | - | 116858 lb | - |
| Rated Payload - Quarry Face | - | 12.5 ton (US) | - |
| Bucket Capacity Range | - | 6.4-7.6 m3 (8.3-10 yd3) | - |
| Cat Truck Match - High Lift | - | 772/773/775 | - |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. | - |
Hydraulic System - Lift/Tilt |
|||
| Lift/Tilt System - Circuit | - | EH - Load Sense | - |
| Lift/Tilt System | - | 2X x 145 cc Variable displacement piston | - |
| Maximum Flow at 2,165 rpm | - | 159 gal/min | - |
| Relief Valve Setting - Lift/Tilt | - | 4598 psi | - |
| Cylinders, Double Acting - Lift, Bore and Stroke | - | 190 mm x 1216 mm (7.5 in x 48 in) | - |
| Cylinders, Double Acting - Tilt, Bore and Stroke | - | 170 mm x 722 mm (6.7 in x 28.4 in) | - |
| Pilot System | - | Variable displacement piston | - |
| Tilt Cylinder - Stroke | - | 27 in | - |
Hydraulic Cycle Times |
|||
| Rack Back | - | 3.8 s | - |
| Raise | - | 7.5 s | - |
| Dump | - | 3 s | - |
| Lower Float Down | - | 4.6 s | - |
| Total Hydraulic Cycle Time - Empty Bucket | - | 18.9 s | - |
Hydraulic System - Steering |
|||
| Steering System - Circuit | - | Pilot, load sensing | - |
| Steering System - Pump | - | Piston, variable displacement | - |
| Maximum Flow | - | 52 gal (US) | - |
| Relief Valve Setting - Steering | - | 4000 psi | - |
| Total Steering Angle | - | 70° | - |
| Steering Cycle Times - High Idle | - | 3 s | - |
| Steering Cycle Times - Low Idle | - | 5.2 s | - |
Brakes |
|||
| Brakes | - | ISO 3450:2011 | - |
Operator's Cab |
|||
| ROPS/FOPS | - | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | - |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
|||
| Operator Sound Level (ISO 6396) | - | 72 dB(A) | - |
| Machine Sound Level (ISO 6395) | - | 110 dB(A) | - |
| Note (1) | - | The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - |
| Note (2) | - | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - |
| Note (3) | - | The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - |
Dimensions (Approximate) - High Lift |
|||
| Ground to Top of ROPS | - | 13.5 ft | - |
| Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
| Ground to Top of Hood | - | 10.7 ft | - |
| Rear Axle - Centerline to Bumper | - | 10.3 ft | - |
| Front Axle Centerline to Bucket Tip | - | 15.7 ft | - |
| Wheel Base | - | 12.5 ft | - |
| Maximum Overall Length | - | 39.5 ft | - |
| Ground to Lower Hitch Clearance | - | 1.5 ft | - |
| Clearance at Maximum Lift | - | 12 ft | - |
| B-Pin Height - Maximum Lift | - | 18.7 ft | - |
| Maximum Overall Height - Bucket Raised | - | 25 ft | - |
| Reach - Maximum Lift | - | 7.7 ft | - |
| Note | - | Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. | - |
Add a Similar Product:
