930M Ag Handler Small Wheel Loader

360° View

Video

Product description

The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Engine

Maximum Gross Power - 168HP
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) - 601ft·lbf
Stroke - Performance Power Mode: Range 1-4 - 5.3in
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) - 1800r/min
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) - 797N·m
Displacement (Performance Power Mode: Speed Range 1-4) - 428in³
Emissions - Engine meets U.S. EPA Tier 4 Final emission standards.
Engine Model - Cat® C7.1
Note (4) - No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Rated Gross Power - ISO 14396 - 168HP
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) - 170HP
Note (2) - **Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (3) - Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) - 168HP
Note (1) - *The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Bore (Standard Power Mode: Range 1-4) - 4.1in
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) - 156HP
Stroke (Standard Power Mode: Range 1-3**) - 5.3in
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) - 156HP
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**) - 1600r/min
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) - 166HP
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) - 164HP
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**) - 158HP
Bore (Standard Power Mode: Range 1-3**) - 4.1in
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) - 587ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**) - 795N·m
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**) - 776N·m
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) - 163HP
Displacement (Standard Power Mode: Range 1-3**) - 428in³
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**) - 160HP
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**) - 162HP
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**) - 573ft·lbf
Maximum Rated Gross Power - ISO 14396 (metric) - 170mhp

Weights

Operating Weight - 31382lb

Buckets

Bucket Capacities - 2.1-5.0 m³ (2.7-6.5 yd³)
Bucket Capacities - Light Material - 3.1-5.0 m³ (4.0-6.5 yd³)

Cab

ROPS - ISO 3471:2008
FOPS - ISO 3449:2005 Level II
Note (1) - *The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* - 101dB(A)
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* - 68dB(A)

Power Train

Front Axle - Fixed
Front Axle - Traction Aid* - Locking differential standard
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25 - ± 10.5 degrees
Brakes - Service - Inboard wet disc
Rear Axle - Traction Aid - Limited slip differential optional
Brakes - Parking - Spring applied hydraulically released
Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65 - ± 7 degrees
Note - *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).
Rear Axle - Oscillating
Note (2) - Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Tires

Note (1) - Other tire choices are available. Contact your Cat dealer for details.
Other Choices Include - 20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX
Standard Size - 20.5 R25, radial (L-3)
Note (2) - Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Transmission

Reverse - Range 2 - 8mile/h
Note - Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine
Forward - Range 3 - 17mile/h
Forward - Range 4 - 25mile/h
Reverse - Range 3 - 17mile/h
Reverse - Range 1* - 8mile/h
Forward - Range 2 - 8mile/h
Forward - Range 1* - 1-13 km/h (0.6-8 mph)
Reverse - Range 4 - 25mile/h

Loader Hydraulic System

Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height) - 1.7s
Maximum Working Pressure - Implement Pump - 4061psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure - 4351psi
Note (1) - Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift) - 5.7s
Maximum Flow - Implement Pump - 3rd Function Maximum Flow* - 50gal/min
Lift Cylinder: Standard Lift Linkage - Bore Diameter - 4.3in
Tilt Cylinder: Standard Lift Linkage - Stroke - 21.9in
Tilt Cylinder: Standard Lift Linkage - Rod Diameter - 2.8in
Lift Cylinder: Standard Lift Linkage - Rod Diameter - 2.4in
Tilt Cylinder: Standard Lift Linkage - Bore Diameter - 5.1in
Lift Cylinder: Standard Lift Linkage - Stroke - 28.7in
Relief Pressure - Tilt Cylinder - 4351psi
Cycle Times - 1,600 rpm - Standard: Total Cycle Time - 10.1s
Maximum Flow - Implement Pump - 50gal/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow* - 42gal/min
Note (2) - Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height) - 1.5s
Note - *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time - 9.3s
Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level) - 2.7s
Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift) - 5.1s
Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level) - 2.7s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure - 4061psi

Steering

Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited - 2.8s
Steering Articulation Angle - Each Direction - 40°
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed - 2.4s
Steering Cylinder, Double Acting - Rod Diameter - 1.6in
Note (2) - Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left - 3.5turns
Maximum Flow - Steering Pump - 34gal/min
Steering Cylinder, Double Acting - Bore Diameter - 2.8in
Steering Cylinder, Double Acting - Stroke - 17.2in
Note (1) - Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Maximum Working Pressure - Steering Pump - 3500psi

Service Refill Capacities

Axles - Front - 6.9gal (US)
Hydraulic Tank - 23.8gal (US)
Transmission - Gear Box - 2.2gal (US)
Cooling System - 7.9gal (US)
Diesel Exhaust Fluid (DEF) Tank - 5gal (US)
Fuel Tank - 51.5gal (US)
Axles - Rear - 6.6gal (US)
Hydraulic System - Including Tank - 43.6gal (US)
Engine Crankcase - 5.3gal (US)

Axles

Rear - Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Front - Fixed; Locking differential (standard)

Dimensions with Bucket - Standard Lift

Height - Ground Clearance** - 1.3ft
Rack Angle at Carry - 43°
Departure Angle - 33°
Length - Wheel Base - 9.8ft
Length - Rear Axle to Bumper - 6.5ft
Turning Radius - Over Bucket - 19.5ft
Carry Height - Bucket Pin - 1.3ft
Width - Over Tires - 8.3ft
Note (2) - **Vary with tire.
Dig Depth** - 3.9in
Turning Radius - Outside of Tires - 17.7ft
Clearance - Level Bucket** - 11.75ft
Clearance - Bucket at 45°* - 9.1ft
Rack Angle at Full Lift - 54°
Height - Overall** - 17.1ft
Width - Bucket - 8.4ft
Height - Ground to Axle Center** - 2.25ft
Height - Bucket Pin** - 12.8ft
Operating Weight - 31125lb
Width - Tread Center - 6.3ft
Turning Radius - Inside of Tires - 9.4ft
Reach - Bucket at 45°* - 3.6ft
Length - Overall* - 24.9ft
Clearance - Load over Height** - 10.9ft
Length - Hitch to Front Axle - 4.9ft
Height - Ground to Beacon** - 12.2ft
Articulation Angle - 40°
Height - Ground to Cab** - 10.9ft
Note (3) - Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Note (1) - *Vary with bucket.
Dump Angle at Full Lift - 48°

Dimensions with Bucket - High Lift

Length - Rear Axle to Bumper - 6.5ft
Departure Angle - 33°
Height - Overall** - 18.7ft
Reach - Bucket at 45°* - 4.4ft
Dump Angle at Full Lift - 48°
Width - Bucket - 8.4ft
Length - Wheel Base - 9.8ft
Width - Tread Center - 6.3ft
Length - Hitch to Front Axle - 4.9ft
Height - Ground to Axle Center** - 2.25ft
Note (1) - *Vary with bucket.
Clearance - Bucket at 45°* - 10.7ft
Height - Bucket Pin** - 14.4ft
Height - Ground to Beacon** - 12.2ft
Carry Height - Bucket Pin - 1.9ft
Clearance - Load over Height** - 11.6ft
Turning Radius - Outside of Tires - 17.7ft
Turning Radius - Over Bucket - 20.6ft
Rack Angle at Full Lift - 51°
Rack Angle at Carry - 47°
Length - Overall* - 27ft
Note (2) - **Vary with tire.
Height - Ground to Cab** - 10.9ft
Turning Radius - Inside of Tires - 9.4ft
Clearance - Level Bucket** - 13.4ft
Width - Over Tires - 8.3ft
Note (3) - Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Dig Depth** - 5.3in
Articulation Angle - 40°
Operating Weight - 31441lb
Height - Ground Clearance** - 1.3ft

Sustainability

Recyclability - 94%

Operating Specifications

Full Turn Tip Load - 19424lb

Air Conditioning System

Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Standard Equipment:

Power Train
- Auto idle shut down feature
- Cat C7.1 engine
  - Power modes (Standard and Performance)
  - Power by range (High Power in Range 4)
  - Turbocharged and aftercooled
  - Diesel particulate filter (Fit for Life)
- Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Oil sampling ports
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control
  - Operator modes (Default, TC, Hystat^™, and Ice)
  - Directional Shift Aggressiveness (fast, medium, slow)
  - Rimpull control, adjust wheel torque
  - Creeper control, adjust ground speed
- Axle Duo-Cone^™ seal guards
- Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Throttle lock and max speed limiter
Hydraulics
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Load sensing hydraulics and steering
Electrical
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Halogen work and roading lights, LED rear tail lights
- Product Link^™ PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
Operator Environment
- Cab, pressurized
- 75 mm (3 in) retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- External heated mirrors with lower parabolic
- Hydraulic control lockout
- Ground level cab door release
- Suspension seat, fabric
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Mirror, single
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Camera, rear view
Other Standard Equipment
- Cat optimized Z-bar linkage with parallel lift
- Large-access enclosure doors with adjustable close/open force
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures

Optional Equipment:

Optional Equipment
- Auto lube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Beacon light, strobe
- Cab, deluxe (standard in Europe)
  - Camera, rear view integrated into advanced display
  - Electrically adjustable external heated mirrors (2)
  - Secondary display to enable features and adjust parameters
  - LED interior lighting
  - Sunscreen, front and rear
  - Touchscreen secondary display
  - Ride control adjustable speed activation
  - Preventative maintenance reminders
  - Integrated help function (26 languages)
- Camera, roof mounted, front view with separate display
- Cat Production Measurement weigh scale system integrated into secondary display
- Cold start package
  - Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
- Coupler, (Fusion and ISO 23727)
- Fenders (extended cover and full coverage)
- Differential, limited slip, rear
- Guarding packages
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Linkage, high lift
- Payload Technology
  - Cat Production Measurement (CPM)
  - CPM Printer
- Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Ride Control System, adjustable through secondary display
- Seats
  - Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
  - Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
- Steering
  - Dual mode and secondary
- Tire Pressure Monitoring (TPM)
- Counterweight, additional options
- Debris packages (low, medium, high)
- Rear Object Detection