Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf
-
-
Stroke - Performance Power Mode: Range 1-4
5.3 in
-
-
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min
-
-
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
797 N·m
-
-
Displacement (Performance Power Mode: Speed Range 1-4)
428 in³
-
-
Emissions
Engine meets U.S. EPA Tier 4 Final emission standards.
-
-
Engine Model
Cat® C7.1
-
-
Note (4)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
-
-
Maximum Rated Gross Power - ISO 14396
168 HP
-
-
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
170 HP
-
-
Note (2)
**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
-
-
Note (3)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
-
-
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 HP
-
-
Note (1)
*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
-
-
Bore (Standard Power Mode: Range 1-4)
4.1 in
-
-
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 HP
-
-
Stroke (Standard Power Mode: Range 1-3**)
5.3 in
-
-
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 HP
-
-
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)
1600 r/min
-
-
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 HP
-
-
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 HP
-
-
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
158 HP
-
-
Bore (Standard Power Mode: Range 1-3**)
4.1 in
-
-
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
587 ft·lbf
-
-
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)
795 N·m
-
-
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)
776 N·m
-
-
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 HP
-
-
Displacement (Standard Power Mode: Range 1-3**)
428 in³
-
-
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)
160 HP
-
-
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)
162 HP
-
-
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)
573 ft·lbf
-
-
Maximum Rated Gross Power - ISO 14396 (metric)
170 mhp
-
-
Weights
Operating Weight
31382 lb
-
-
Buckets
Bucket Capacities
2.1-5.0 m³ (2.7-6.5 yd³)
-
-
Bucket Capacities - Light Material
3.1-5.0 m³ (4.0-6.5 yd³)
-
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005 Level II
-
-
Note (1)
*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab
-
-
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101 dB(A)
-
-
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
-
-
Transmission
Reverse - Range 2
8 mile/h
-
-
Note
Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine
-
-
Forward - Range 3
17 mile/h
-
-
Forward - Range 4
25 mile/h
-
-
Reverse - Range 3
17 mile/h
-
-
Reverse - Range 1*
8 mile/h
-
-
Forward - Range 2
8 mile/h
-
-
Forward - Range 1*
1-13 km/h (0.6-8 mph)
-
-
Reverse - Range 4
25 mile/h
-
-
Loader Hydraulic System
Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)
1.7 s
-
-
Maximum Working Pressure - Implement Pump
4061 psi
-
-
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351 psi
-
-
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
-
-
Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)
5.7 s
-
-
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min
-
-
Lift Cylinder: Standard Lift Linkage - Bore Diameter
4.3 in
-
-
Tilt Cylinder: Standard Lift Linkage - Stroke
21.9 in
-
-
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
2.8 in
-
-
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.4 in
-
-
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.1 in
-
-
Lift Cylinder: Standard Lift Linkage - Stroke
28.7 in
-
-
Relief Pressure - Tilt Cylinder
4351 psi
-
-
Cycle Times - 1,600 rpm - Standard: Total Cycle Time
10.1 s
-
-
Maximum Flow - Implement Pump
50 gal/min
-
-
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min
-
-
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
-
-
Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)
1.5 s
-
-
Note
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
-
-
Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time
9.3 s
-
-
Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)
2.7 s
-
-
Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)
5.1 s
-
-
Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)
2.7 s
-
-
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061 psi
-
-
Steering
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
-
-
Steering Articulation Angle - Each Direction
40°
-
-
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
-
-
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
-
-
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
-
-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.5 turns
-
-
Maximum Flow - Steering Pump
34 gal/min
-
-
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
-
-
Steering Cylinder, Double Acting - Stroke
17.2 in
-
-
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
-
-
Maximum Working Pressure - Steering Pump
3500 psi
-
-
Service Refill Capacities
Axles - Front
6.9 gal (US)
-
-
Hydraulic Tank
23.8 gal (US)
-
-
Transmission - Gear Box
2.2 gal (US)
-
-
Cooling System
7.9 gal (US)
-
-
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
-
-
Fuel Tank
51.5 gal (US)
-
-
Axles - Rear
6.6 gal (US)
-
-
Hydraulic System - Including Tank
43.6 gal (US)
-
-
Engine Crankcase
5.3 gal (US)
-
-
Axles
Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
-
-
Front
Fixed; Locking differential (standard)
-
-
Dimensions with Bucket - Standard Lift
Height - Ground Clearance**
1.3 ft
-
-
Rack Angle at Carry
43 °
-
-
Departure Angle
33 °
-
-
Length - Wheel Base
9.8 ft
-
-
Length - Rear Axle to Bumper
6.5 ft
-
-
Turning Radius - Over Bucket
19.5 ft
-
-
Carry Height - Bucket Pin
1.3 ft
-
-
Width - Over Tires
8.3 ft
-
-
Note (2)
**Vary with tire.
-
-
Dig Depth**
3.9 in
-
-
Turning Radius - Outside of Tires
17.7 ft
-
-
Clearance - Level Bucket**
11.75 ft
-
-
Clearance - Bucket at 45°*
9.1 ft
-
-
Rack Angle at Full Lift
54 °
-
-
Height - Overall**
17.1 ft
-
-
Width - Bucket
8.4 ft
-
-
Height - Ground to Axle Center**
2.25 ft
-
-
Height - Bucket Pin**
12.8 ft
-
-
Operating Weight
31125 lb
-
-
Width - Tread Center
6.3 ft
-
-
Turning Radius - Inside of Tires
9.4 ft
-
-
Reach - Bucket at 45°*
3.6 ft
-
-
Length - Overall*
24.9 ft
-
-
Clearance - Load over Height**
10.9 ft
-
-
Length - Hitch to Front Axle
4.9 ft
-
-
Height - Ground to Beacon**
12.2 ft
-
-
Articulation Angle
40 °
-
-
Height - Ground to Cab**
10.9 ft
-
-
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
-
-
Note (1)
*Vary with bucket.
-
-
Dump Angle at Full Lift
48 °
-
-
Dimensions with Bucket - High Lift
Length - Rear Axle to Bumper
6.5 ft
-
-
Departure Angle
33 °
-
-
Height - Overall**
18.7 ft
-
-
Reach - Bucket at 45°*
4.4 ft
-
-
Dump Angle at Full Lift
48 °
-
-
Width - Bucket
8.4 ft
-
-
Length - Wheel Base
9.8 ft
-
-
Width - Tread Center
6.3 ft
-
-
Length - Hitch to Front Axle
4.9 ft
-
-
Height - Ground to Axle Center**
2.25 ft
-
-
Note (1)
*Vary with bucket.
-
-
Clearance - Bucket at 45°*
10.7 ft
-
-
Height - Bucket Pin**
14.4 ft
-
-
Height - Ground to Beacon**
12.2 ft
-
-
Carry Height - Bucket Pin
1.9 ft
-
-
Clearance - Load over Height**
11.6 ft
-
-
Turning Radius - Outside of Tires
17.7 ft
-
-
Turning Radius - Over Bucket
20.6 ft
-
-
Rack Angle at Full Lift
51 °
-
-
Rack Angle at Carry
47 °
-
-
Length - Overall*
27 ft
-
-
Note (2)
**Vary with tire.
-
-
Height - Ground to Cab**
10.9 ft
-
-
Turning Radius - Inside of Tires
9.4 ft
-
-
Clearance - Level Bucket**
13.4 ft
-
-
Width - Over Tires
8.3 ft
-
-
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
-
-
Dig Depth**
5.3 in
-
-
Articulation Angle
40 °
-
-
Operating Weight
31441 lb
-
-
Height - Ground Clearance**
1.3 ft
-
-
Sustainability
Recyclability
94%
-
-
Operating Specifications
Full Turn Tip Load
19424 lb
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
