CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    920 Compact Wheel Loader
    View Product
    995 Wheel Loader
    View Product Remove
    980
    View Product Remove

    Engine
    Maximum Gross Power 121 HP - -
    Rated Net Power - Rated Engine Speed 2200 r/min - -
    Maximum Gross Power - Rated Engine Speed 2200 r/min - -
    Rated Net Power - SAE J1349 120 HP - -
    Maximum Gross Power - ISO 14396 (metric) 122 HP - -
    Rated Net Power - ISO 9249 118 HP - -
    Maximum Gross Torque - SAE J1995 372 ft·lbf - -
    Maximum Gross Torque - ISO 14396 369 ft·lbf - -
    Maximum Net Torque - SAE J1349 366 ft·lbf - -
    Maximum Net Torque - ISO 9249 363 ft·lbf - -
    Displacement 220 in³ 4766 in³ 12.5 L
    Bore 3.85 in 6.7 in -
    Stroke 4.72 in 8.5 in -
    Engine Model Cat C3.6 Cat® 3516E Cat C13
    Emissions Engine meets Tier 4 Final/Stage V emission standards. U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent -
    Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. - -
    Maximum Gross Power - ISO 14396 121 HP - -
    Engine Power - ISO 14396 - 1847 HP -
    Gross Power - SAE J1995 - 1870 HP -
    Net Power - SAE J1349 - Standard Ambient - 1739 HP -
    Net Power - SAE J1349 - High Ambient - 1696 HP -
    Peak Torque - 1,200 rpm - SAE J1995 - 8549 lb/ft -
    Torque Rise - 39% -
    Note (1) - The power ratings apply when tested under the reference conditions for the specified standard. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
    Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Note (3) - The gross power advertised is with the fan at maximum speed. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - - 393 HP
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - - 1627 lb/ft
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - - 1612 lb/ft
    Gross Power @ 1,700 rpm – SAE J1995:2014 - - 425 HP
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - - 1539 lb/ft
    Engine Power @ 1,700 rpm – ISO 14396:2002 - - 429 HP

    Weights
    Operating Weight 21742 lb - 66877 lb
    Note - - Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s

    Buckets
    Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3) - -
    Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) - -
    Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³) - -

    Sustainability
    Recyclability 95% - -

    Service Refill Capacities
    Transmission 0.8 gal (US) - 20.3 gal (US)
    Engine Crankcase 2.6 gal (US) - -
    Axles - Rear 4.5 gal (US) - -
    Hydraulic System - Including Tank 25.9 gal (US) - -
    Cooling System 5.7 gal (US) - 13.7 gal (US)
    Fuel Tank 43.6 gal (US) - 112.5 gal (US)
    Hydraulic Tank 14.5 gal (US) - 40.4 gal (US)
    Note DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - -
    Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) - -
    Axles - Front 4.5 gal (US) - -
    Crankcase - - 9.8 gal (US)
    DEF Tank - - 5.5 gal (US)
    Differential - Final Drives - Front - - 22.2 gal (US)
    Differential - Final Drives - Rear - - 22.4 gal (US)

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 - -
    Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - -
    Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - -
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - -
    Note (4) *The measurements were conducted with the cab doors and windows closed. - -

    Loader Hydraulic System
    Maximum Flow - Implement Pump 43.6 gal/min - -
    Relief Pressure - Tilt Cylinder 4641 psi - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 25 gal/min - -
    Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure 4641 psi - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 2.7 s - -
    Note All cycle times listed are with cylinder snubbing turned off. - -
    Maximum Working Pressure - Implement Pump 4061 psi - -
    Hydraulic Cycle Time - Total Cycle Time 11.5 s - -
    Hydraulic Cycle Time - Rackback 2.2 s - -
    Hydraulic Cycle Time - Dump, at Maximum Reach 1.8 s - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 4.8 s - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 40 gal/min - -
    Maximum Flow - Implement Pump - 4rd Function, Maximum Flow 25 gal/min - -

    Steering
    Maximum Working Pressure - Steering Pump 3190 psi - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.3 s - -
    Steering Articulation Angle - Each Direction 40 ° - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.4 turns - -
    Maximum Flow - Steering Pump 21.7 gal/min - -

    Transmission
    Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. Travel speeds based on 58/85-57 tires. Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
    Forward and Reverse - Speed Range 3 25 mile/h - -
    Forward and Reverse - Speed Range 2* 12.5 mile/h - -
    Forward and Reverse - Speed Range 1* 6.3 mile/h - -
    Transmission Type - Cat Planetary Power Shift -
    Forward - 1 - 4.6 mile/h 4.3 mile/h
    Forward - 2 - 8 mile/h 8.3 mile/h
    Forward - 3 - 13.6 mile/h 14.6 mile/h
    Reverse - 1 - 5 mile/h 4.8 mile/h
    Reverse - 2 - 8.8 mile/h 9.4 mile/h
    Reverse - 3 - 14.9 mile/h 16.7 mile/h
    Direct Drive - Forward 1 - Lock-up disables -
    Direct Drive - Forward 2 - 8.7 mile/h -
    Direct Drive - Forward 3 - 15.2 mile/h -
    Direct Drive - Reverse 1 - Lock-up disables -
    Direct Drive - Reverse 2 - 9.6 mile/h -
    Direct Drive - Reverse 3 - 16.8 mile/h -
    Forward - 4 - - 24.5 mile/h
    Reverse - 4 - - 24.5 mile/h

    Axles
    Rear Oscillating ±11 degrees; Locking differential (standard) Trunnion -
    Front Fixed; Locking differential (standard) Fixed -
    Oscillation Angle - 9° -

    Tires
    Other Choices Include 17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid - -
    Standard Size 17.5 R25 L2 XTLA - -
    Note (1) Other tire choices are available. Contact your Cat dealer for details. - -
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - -
    Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - -

    Operating Specifications
    Operating Weight - Standard - 543772 lb -
    Bucket Capacity Range - 17.2-43.6 m3 (22.3-57 yd3) -
    Operating Weight - High Lift - 547675 lb -
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - 60 ton (US) -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - 50 ton (US) -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - 55 ton (US) -
    Rated Payload - High Lift (Moderate to High Digging Resistance) - 50 ton (US) -
    Note - *Please contact your local dealer to determine if your application is suitable for this increased rated payload. -
    Cat Truck Match - Standard - 785/789 -
    Cat Truck Match - High Lift - 789/793/794 -
    Breakout Force - - 51008 lb
    Note (1) - - For a machine configuration as defined under �Weight.�
    Note (2) - - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Static Tipping Load - Full 40° Turn - No Tire Deflection - - 20965 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - - 43432 lb

    Complete System Fill
    Fuel Tank - Standard - 856 gal (US) -
    Fuel Tank - With 24 hr Attachment - 1414 gal (US) -
    Cooling System - 138 gal (US) -
    Engine Crankcase - 76 gal (US) -
    Transmission - 110 gal (US) -
    Differential - Final Drives - Front - 220 gal (US) -
    Differential - Final Drives - Rear - 200 gal (US) -
    Hydraulic Tank - Implement and Hydraulic Fan - 270 gal (US) -
    Hydraulic Tank - Steering and Braking - 100 gal (US) -
    Oil Renewal System (ORS)* - 20 gal (US) -
    Note - *Not available on Tier 4 Final/Stage V machines. Not available in all regions. -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - 131 °F -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - 127.4 °F -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 74 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 119 dB(A) -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 73 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 117 dB(A) -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, Load Sensing -
    Steering System - Pump - Piston, Variable Displacement -
    Total Steering Angle - 80 degrees -
    Steering Cycle Times - Low Idle - 7.6 s -
    Steering Cycle Times - High Idle - 4.3 s -

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - 28.8 ft -
    Clearance at Maximum Lift - 19.8 ft -
    Dump Angle at Maximum Lift - –50.0 degrees -
    Front Axle Centerline to Bucket Tip - 21.9 ft -
    Ground to Bumper Clearance - 4.4 ft -
    Ground to Center of Axles - 6 ft -
    Ground to Lower Hitch Clearance - 2.9 ft -
    Ground to Top of Exhaust Stacks - 23.2 ft -
    Ground to Top of Hood - 18.6 ft -
    Ground to Top of ROPS - 23.4 ft -
    Maximum Overall Height - Bucket Raised - 39.3 ft -
    Maximum Overall Length - 64.6 ft -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
    Rack Angle at Maximum Lift - 59.5 degrees -
    Rack Back Angle - Carry - 47.7 degrees -
    Rack Back Angle - Ground Level - 39.7 degrees -
    Reach - Maximum Lift - 9.6 ft -
    Rear Axle - Centerline to Bumper - 20.4 ft -
    Tread Width - 14.1 ft -
    Wheel Base - 22.3 ft -
    Width - Over Tires - With Bulge - 18.8 ft -

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - 31.6 ft -
    Clearance at Maximum Lift - 22.6 ft -
    Dump Angle at Maximum Lift - –50.0 degrees -
    Front Axle Centerline to Bucket Tip - 24.2 ft -
    Ground to Bumper Clearance - 4.4 ft -
    Ground to Center of Axles - 6 ft -
    Ground to Lower Hitch Clearance - 2.9 ft -
    Ground to Top of Exhaust Stacks - 23.2 ft -
    Ground to Top of Hood - 18.6 ft -
    Ground to Top of ROPS - 23.4 ft -
    Maximum Overall Height - Bucket Raised - 42.1 ft -
    Maximum Overall Length - 66.9 ft -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
    Rack Angle at Maximum Lift - 59.4 degrees -
    Rack Back Angle - Carry - 53.5 degrees -
    Rack Back Angle - Ground Level - 45 degrees -
    Reach - Maximum Lift - 9.4 ft -
    Rear Axle - Centerline to Bumper - 20.4 ft -
    Tread Width - 14.1 ft -
    Wheel Base - 22.3 ft -
    Width - Over Tires - With Bulge - 18.8 ft -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive Flow Control -
    Lift/Tilt System - Pump - Variable Displacement Piston -
    Maximum Flow at 1,700 rpm Engine Speed - 541 gal/min -
    Relief Valve Setting - Lift/Tilt - 5004 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 370 × 1713 mm (14.6 × 67.4 in) -
    Cylinders, Double Acting - Tilt, Bore and Stroke - 310 × 1086 mm (12.2 × 42.8 in) -
    Pilot System - Open Loop and Pressure Reducing -

    Hydraulic Cycle Times
    Rack Back - 4.9 s -
    Raise - 12.6 s -
    Dump - 3.1 s -
    Lower Float Down - 4.2 s -

    Brakes
    Brakes - ISO 3450:2011 -

    Bucket Capacities
    Bucket Range - - 4.0-14.5 m³ 5.25-19 yd³

    Sound
    Note (1) - - ** For machines in European Union countries and in countries that adopt the �EU Directives.�
    Note (2) - - ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - - 109
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - - 112 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - - 78
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)

    Air Conditioning System
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

    Hydraulic System
    Implement System - Maximum Operating Pressure - - 4975 psi
    Implement System - Maximum Pump Output at 2,250 rpm - - 119 gal/min

    Dimensions
    Note - - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - - 8.9 ft
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 1.5 ft
    Height - Top of Exhaust Pipe - - 12.5 ft
    Height - Top of Hood - - 10.1 ft
    Height - Top of ROPS - - 12.7 ft
    Hinge Pin Height at Carry - - 2.2 ft
    Hinge Pin Height at Maximum Lift - - 15.7 ft
    Lift Arm Clearance at Maximum Lift - - 13.6 ft
    Overall Length - Without Bucket - - 27.5 ft
    Tread Width - - 8 ft
    Wheel Base - - 12.6 ft
    Rack Back at Ground - - 40 degrees
    Width over Tires (Loaded) - - 10.9 ft
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees

    Dimensions - Standard Lift
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 456 mm
    Height - Top of Exhaust Pipe - - 3764 mm
    Height - Top of Hood - - 3064 mm
    Height - Top of ROPS - - 3829 mm
    Hinge Pin Height at Carry - - 2.2 ft
    Hinge Pin Height at Maximum Lift - - 4554 mm
    Lift Arm Clearance at Maximum Lift - - 3881 mm
    Overall Length - Without Bucket - - 8155 mm
    Tread Width - - 8 ft
    Wheel Base - - 3800 mm
    Rack Back at Ground - - 40 degrees
    Centerline of Rear Axle to Edge of Counterweight - - 2661 mm
    Width over Tires (Loaded) - - 10.9 ft
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees
    Add a Similar Product: