Compare

Compare Equipment Go Back

Engine
	920 Compact Wheel Loader View Product	988 GC Wheel Loader View Product Remove	995 Wheel Loader View Product Remove	988 XE Wheel Loader View Product Remove
Maximum Gross Power	121 HP	-	-	-
Rated Net Power - Rated Engine Speed	2200 r/min	-	-	-
Maximum Gross Power - Rated Engine Speed	2200 r/min	-	-	-
Rated Net Power - SAE J1349	120 HP	-	-	-
Maximum Gross Power - ISO 14396 (metric)	122 HP	-	-	-
Rated Net Power - ISO 9249	118 HP	-	-	-
Maximum Gross Torque - SAE J1995	372 ft·lbf	-	-	-
Maximum Gross Torque - ISO 14396	369 ft·lbf	-	-	-
Maximum Net Torque - SAE J1349	366 ft·lbf	-	-	-
Maximum Net Torque - ISO 9249	363 ft·lbf	-	-	-
Displacement	220 in³	927 in³	4766 in³	1105 in³
Bore	3.85 in	5.4 in	6.7 in	5.7 in
Stroke	4.72 in	6.75 in	8.5 in	7.2 in
Engine Model	Cat C3.6	Cat® C15	Cat® 3516E	Cat® C18 ™
Emissions	Engine meets Tier 4 Final/Stage V emission standards.	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
Note	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-	-	-
Maximum Gross Power - ISO 14396	121 HP	-	-	-
Rated Speed	-	2000	-	1,700 rpm
Peak Power Speed	-	1600	-	1,500 rpm
Engine Power - ISO 14396	-	449 HP	1847 HP	-
Gross Power - SAE J1995	-	456 HP	1870 HP	-
Net Power - SAE J1349	-	373 HP	-	538 HP
Peak Torque - 1,200 rpm - SAE J1995	-	1778 ft·lbf	8549 lb/ft	2230 ft·lbf
Torque Rise	-	16%	39%	58%
Net Power - SAE J1349 - Standard Ambient	-	-	1739 HP	-
Net Power - SAE J1349 - High Ambient	-	-	1696 HP	-
Note (1)	-	-	The power ratings apply when tested under the reference conditions for the specified standard.	-
Note (2)	-	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-
Note (3)	-	-	The gross power advertised is with the fan at maximum speed.	-
Engine Power - ISO 14396:2002	-	-	-	580 HP
Gross Power - SAE J1995:2014	-	-	-	588 HP
Weights
Operating Weight	21742 lb	-	-	-
Buckets
Bucket Capacities	1.3-3.5 m3 (1.7-4.6 yd3)	6.4-7.6 m3 (8.3-10 yd3)	-	4.7-13 m3 (6.2-17 yd3)
Bucket Capacities - General Purpose	1.3-1.9 m³ (1.7-2.5 yd³)	-	-	-
Bucket Capacities - Light Material	2.5-3.5 m³ (3.3-4.6 yd³)	-	-	-
Sustainability
Recyclability	95%	96%	-	96%
Service Refill Capacities
Transmission	0.8 gal (US)	20 gal (US)	-	16 gal (US)
Engine Crankcase	2.6 gal (US)	9 gal (US)	-	16 gal (US)
Axles - Rear	4.5 gal (US)	-	-	-
Hydraulic System - Including Tank	25.9 gal (US)	-	-	-
Cooling System	5.7 gal (US)	27 gal (US)	-	-
Fuel Tank	43.6 gal (US)	141 gal (US)	-	147 gal (US)
Hydraulic Tank	14.5 gal (US)	-	-	-
Note	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a	-	All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati
Diesel Exhaust Fluid (DEF) Tank	4.8 gal (US)	-	-	-
Axles - Front	4.5 gal (US)	-	-	-
Diesel Exhaust Fluid Tank	-	5.5 gal (US)	-	8.7 gal (US)
Differential - Final Drives - Front	-	49 gal (US)	-	49 gal (US)
Differential - Final Drives - Rear	-	45 gal (US)	-	49 gal (US)
Cooling System - Jacket Water	-	-	-	30 gal (US)
Cooling Systems - Power Train	-	-	-	8 gal (US)
Hydraulic System - Implement/Steering	-	-	-	126 gal (US)
Cab
ROPS	ISO 3471:2008	-	-	-
FOPS	ISO 3449:2005	-	-	-
Note (3)	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-	-	-
Note (2)	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-	-	-
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-	-	-
Note (4)	*The measurements were conducted with the cab doors and windows closed.	-	-	-
Loader Hydraulic System
Maximum Flow - Implement Pump	43.6 gal/min	-	-	-
Relief Pressure - Tilt Cylinder	4641 psi	-	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	25 gal/min	-	-	-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	4641 psi	-	-	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	2.7 s	-	-	-
Note	All cycle times listed are with cylinder snubbing turned off.	-	-	-
Maximum Working Pressure - Implement Pump	4061 psi	-	-	-
Hydraulic Cycle Time - Total Cycle Time	11.5 s	-	-	-
Hydraulic Cycle Time - Rackback	2.2 s	-	-	-
Hydraulic Cycle Time - Dump, at Maximum Reach	1.8 s	-	-	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	4.8 s	-	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	40 gal/min	-	-	-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	25 gal/min	-	-	-
Steering
Maximum Working Pressure - Steering Pump	3190 psi	-	-	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	2.3 s	-	-	-
Steering Articulation Angle - Each Direction	40 °	-	-	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.4 turns	-	-	-
Maximum Flow - Steering Pump	21.7 gal/min	-	-	-
Transmission
Note	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	-	Travel speeds based on 58/85-57 tires.	-
Forward and Reverse - Speed Range 3	25 mile/h	-	-	-
Forward and Reverse - Speed Range 2*	12.5 mile/h	-	-	-
Forward and Reverse - Speed Range 1*	6.3 mile/h	-	-	-
Transmission Type	-	Cat planetary power shift	Cat Planetary Power Shift	Cat switched reluctance electric drive
Forward - 1	-	5 mile/h	4.6 mile/h	-
Forward - 2	-	8 mile/h	8 mile/h	-
Reverse - 1	-	5 mile/h	5 mile/h	-
Reverse - 2	-	8 mile/h	8.8 mile/h	-
Direct Drive - Forward 1	-	Lock-up disabled	Lock-up disables	-
Direct Drive - Forward 2	-	8 mile/h	8.7 mile/h	-
Direct Drive - Forward 3	-	14 mile/h	15.2 mile/h	-
Direct Drive - Forward 4	-	24 mile/h	-	-
Direct Drive - Reverse 1	-	Lock-up disabled	Lock-up disables	-
Direct Drive - Reverse 2	-	9 mile/h	9.6 mile/h	-
Direct Drive - Reverse 3	-	16 mile/h	16.8 mile/h	-
Direct Drive - Reverse 4	-	25.4 mile/h	-	-
Forward - 3	-	-	13.6 mile/h	-
Reverse - 3	-	-	14.9 mile/h	-
Forward 1 (virtual)	-	-	-	4.3 mile/h
Forward 2 (virtual)	-	-	-	7 mile/h
Forward 3 (virtual)	-	-	-	13.8 mile/h
Forward 4 (virtual)	-	-	-	20 mile/h
Reverse 1 (virtual)	-	-	-	4.3 mile/h
Reverse 2 (virtual)	-	-	-	7 mile/h
Reverse 3 (virtual)	-	-	-	17.5 mile/h
Axles
Rear	Oscillating ±11 degrees; Locking differential (standard)	Trunnion	Trunnion	Trunnion
Front	Fixed; Locking differential (standard)	Fixed	Fixed	Fixed
Oscillation Angle	-	+/-12.5°	9°	13°
Tires
Other Choices Include	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid	-	-	-
Standard Size	17.5 R25 L2 XTLA	-	-	-
Note (1)	Other tire choices are available. Contact your Cat dealer for details.	-	-	-
Note (3)	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-	-	-
Note (2)	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-	-	-
Operating Specifications
Operating Weight	-	116858 lb	-	116362 lb
Rated Payload - Quarry Face	-	12.5 ton (US)	-	-
Bucket Capacity Range	-	6.4-7.6 m3 (8.3-10 yd3)	17.2-43.6 m3 (22.3-57 yd3)	4.7-13 m3 (6.2-17 yd3)
Cat Truck Match - High Lift	-	772/773/775	789/793/794	-
Operating Weight - Standard	-	-	543772 lb	116362 lb
Operating Weight - High Lift	-	-	547675 lb	119618 lb
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	-	60 ton (US)	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	-	50 ton (US)	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	-	55 ton (US)	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	-	50 ton (US)	-
Note	-	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-
Cat Truck Match - Standard	-	-	785/789	-
Rated Payload - Standard (Quarry Face)	-	-	-	12.5 ton (US)
Rated Payload - Loose Material (Standard)	-	-	-	16 ton (US)
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	-	EH - Load Sense	Positive Flow Control	EH-Positive Flow Control, Flow Sharing
Lift/Tilt System	-	2X x 145 cc Variable displacement piston	-	-
Maximum Flow at 2,165 rpm	-	159 gal/min	-	-
Relief Valve Setting - Lift/Tilt	-	4598 psi	5004 psi	4757 psi
Cylinders, Double Acting - Lift, Bore and Stroke	-	190 mm x 1216 mm (7.5 in x 48 in)	370 × 1713 mm (14.6 × 67.4 in)	-
Cylinders, Double Acting - Tilt, Bore and Stroke	-	170 mm x 722 mm (6.7 in x 28.4 in)	310 × 1086 mm (12.2 × 42.8 in)	-
Pilot System	-	Variable displacement piston	Open Loop and Pressure Reducing	-
Tilt Cylinder - Stroke	-	27 in	-	27 in
Lift/Tilt System - Pump	-	-	Variable Displacement Piston	Variable displacement piston
Maximum Flow at 1,700 rpm Engine Speed	-	-	541 gal/min	-
Maximum Flow at 1,400-1,600 rpm	-	-	-	153 gal/min
Lift Cylinder - Bore	-	-	-	8.7 in
Lift Cylinder - Stroke	-	-	-	41.3 in
Tilt Cylinder - Bore	-	-	-	8.7 in
Hydraulic Cycle Times
Rack Back	-	3.8 s	4.9 s	4.5 s
Raise	-	7.5 s	12.6 s	8 s
Dump	-	3 s	3.1 s	2.2 s
Lower Float Down	-	4.6 s	4.2 s	3.5 s
Total Hydraulic Cycle Time - Empty Bucket	-	18.9 s	-	-
Total Hydraulic Cycle Time	-	-	-	18.2 s
Hydraulic System - Steering
Steering System - Circuit	-	Pilot, load sensing	Pilot, Load Sensing	Pilot, load sensing
Steering System - Pump	-	Piston, variable displacement	Piston, Variable Displacement	Piston, variable displacement
Maximum Flow	-	52 gal (US)	-	-
Relief Valve Setting - Steering	-	4000 psi	-	-
Total Steering Angle	-	70°	80 degrees	86°
Steering Cycle Times - High Idle	-	3 s	4.3 s	3.4 s
Steering Cycle Times - Low Idle	-	5.2 s	7.6 s	5.6 s
Maximum Flow at 1,400-1,600 rpm	-	-	-	71.3 gal/min
Steering Cut Off Pressure	-	-	-	4351 psi
Air Conditioning System
Air Conditioning	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Brakes
Brakes	-	ISO 3450:2011	ISO 3450:2011	ISO 3450:2011
Operator's Cab
ROPS/FOPS	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)	-	72 dB(A)	-	-
Machine Sound Level (ISO 6395)	-	110 dB(A)	-	-
Note (1)	-	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-
Note (2)	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Note (3)	-	The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	-	13.5 ft	-	13.8 ft
Ground to Top of Exhaust Stacks	-	13.3 ft	-	14.8 ft
Ground to Top of Hood	-	10.7 ft	-	10.9 ft
Rear Axle - Centerline to Bumper	-	10.3 ft	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	15.7 ft	-	15.3 ft
Wheel Base	-	12.5 ft	-	14.9 ft
Maximum Overall Length	-	39.5 ft	-	40.7 ft
Ground to Lower Hitch Clearance	-	1.5 ft	-	1.9 ft
Clearance at Maximum Lift	-	12 ft	-	13.3 ft
B-Pin Height - Maximum Lift	-	18.7 ft	-	19.3 ft
Maximum Overall Height - Bucket Raised	-	25 ft	-	25.8 ft
Reach - Maximum Lift	-	7.7 ft	-	6.8 ft
Note	-	Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.	-	Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Ground to Bumper Clearance	-	-	-	3.1 ft
Ground to Center of Axles	-	-	-	3.2 ft
Complete System Fill
Fuel Tank - Standard	-	-	856 gal (US)	-
Fuel Tank - With 24 hr Attachment	-	-	1414 gal (US)	-
Cooling System	-	-	138 gal (US)	-
Engine Crankcase	-	-	76 gal (US)	-
Transmission	-	-	110 gal (US)	-
Differential - Final Drives - Front	-	-	220 gal (US)	-
Differential - Final Drives - Rear	-	-	200 gal (US)	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	270 gal (US)	-
Hydraulic Tank - Steering and Braking	-	-	100 gal (US)	-
Oil Renewal System (ORS)*	-	-	20 gal (US)	-
Note	-	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	-	109.4 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	-	131 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	-	127.4 °F	-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	74 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	119 dB(A)	-
Note	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	73 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	117 dB(A)	-
Note	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	-	28.8 ft	-
Clearance at Maximum Lift	-	-	19.8 ft	-
Dump Angle at Maximum Lift	-	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	-	21.9 ft	-
Ground to Bumper Clearance	-	-	4.4 ft	-
Ground to Center of Axles	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	-	23.2 ft	-
Ground to Top of Hood	-	-	18.6 ft	-
Ground to Top of ROPS	-	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	-	39.3 ft	-
Maximum Overall Length	-	-	64.6 ft	-
Note	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	59.5 degrees	-
Rack Back Angle - Carry	-	-	47.7 degrees	-
Rack Back Angle - Ground Level	-	-	39.7 degrees	-
Reach - Maximum Lift	-	-	9.6 ft	-
Rear Axle - Centerline to Bumper	-	-	20.4 ft	-
Tread Width	-	-	14.1 ft	-
Wheel Base	-	-	22.3 ft	-
Width - Over Tires - With Bulge	-	-	18.8 ft	-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	-	31.6 ft	-
Clearance at Maximum Lift	-	-	22.6 ft	-
Dump Angle at Maximum Lift	-	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	-	24.2 ft	-
Ground to Bumper Clearance	-	-	4.4 ft	-
Ground to Center of Axles	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	-	23.2 ft	-
Ground to Top of Hood	-	-	18.6 ft	-
Ground to Top of ROPS	-	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	-	42.1 ft	-
Maximum Overall Length	-	-	66.9 ft	-
Note	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	59.4 degrees	-
Rack Back Angle - Carry	-	-	53.5 degrees	-
Rack Back Angle - Ground Level	-	-	45 degrees	-
Reach - Maximum Lift	-	-	9.4 ft	-
Rear Axle - Centerline to Bumper	-	-	20.4 ft	-
Tread Width	-	-	14.1 ft	-
Wheel Base	-	-	22.3 ft	-
Width - Over Tires - With Bulge	-	-	18.8 ft	-
Sound Performance - Tier 4 Final / Stage V - Standard
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	-	109 dB(A)
Sound Performance - Tier 3 / Stage III - Standard
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	-	110 dB(A)
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	14.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	-	14 ft
Wheel Base	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	39.3 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Axles	-	-	-	3.2 ft
Clearance at Maximum Lift	-	-	-	11.9 ft
B-Pin Height - Maximum Lift	-	-	-	18 ft
Maximum Overall Height - Bucket Raised	-	-	-	24.5 ft
Reach - Maximum Lift	-	-	-	6.5 ft
Note	-	-	-	Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	13.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Fork Tip	-	-	-	16.5 ft
Wheel Base	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	41.9 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Front Axle	-	-	-	3.2 ft
Fork Height with Level Arms	-	-	-	8.1 ft
Fork Top Clamp Opening	-	-	-	13.1 ft
Fork Height at Maximum Lift	-	-	-	17.2 ft
Hinge Pin Height at Maximum Lift	-	-	-	16.1 ft
Dump Angle at Maximum Lift	-	-	-	-39.4 °

Compare Equipment Go Back

920 Compact Wheel Loader

988 GC Wheel Loader

995 Wheel Loader

988 XE Wheel Loader

Engine

Weights

Buckets

Sustainability

Service Refill Capacities

Cab

Loader Hydraulic System

Steering

Transmission

Axles

Tires

Operating Specifications

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Brakes

Operator's Cab

Sound Performance - Tier 4 Final/EU Stage V - Standard

Dimensions (Approximate) - High Lift

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Sound Performance - Tier 4 Final / Stage V - Standard

Sound Performance - Tier 3 / Stage III - Standard

Dimensions (Approximate) - Standard Lift

Dimensions - Millyard Linkage

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us