CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    914 Compact Wheel Loader
    View Product
    980 XE
    View Product Remove
    980
    View Product Remove

    Engine
    Maximum Gross Power 110 HP - -
    Rated Net Power - Rated Engine Speed 2200 r/min - -
    Maximum Gross Power - Rated Engine Speed 1800 r/min - -
    Rated Net Power - SAE J1349 99 HP - -
    Maximum Gross Power - ISO 14396 (metric) 112 HP - -
    Rated Net Power - ISO 9249 98 HP - -
    Maximum Gross Torque - SAE J1995 335 ft·lbf - -
    Maximum Gross Torque - ISO 14396 332 ft·lbf - -
    Maximum Net Torque - SAE J1349 329 ft·lbf - -
    Maximum Net Torque - ISO 9249 327 ft·lbf - -
    Displacement 220 in³ - 12.5 L
    Bore 3.85 in - -
    Stroke 4.72 in - -
    Engine Model Cat C3.6 Cat C13 Cat C13
    Emissions Engine meets Tier 4 Final/Stage V emission standards. - -
    Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. - -
    Maximum Gross Power - ISO 14396 110 HP - -
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - 393 HP 393 HP
    Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Note (1) - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - 1627 lb/ft 1627 lb/ft
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - 1612 lb/ft 1612 lb/ft
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - 1539 lb/ft 1539 lb/ft
    Engine Power @ 1,700 rpm – ISO 14396:2002 - 420 HP 429 HP
    Gross Power @ 1,700 rpm – SAE J1995:2014 - 425 HP 425 HP
    Note (3) - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h

    Weights
    Operating Weight 19103 lb 66877 lb 66877 lb
    Note - Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s

    Buckets
    Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3) - -
    Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) - -
    Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³) - -

    Sustainability
    Recyclability 95% 98% -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 - -
    Note (4) *The measurements were conducted with the cab doors and windows closed. - -
    Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - -
    Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - -
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - -

    Service Refill Capacities
    Cooling System 5.7 gal (US) 13.7 gal (US) 13.7 gal (US)
    Fuel Tank 43.6 gal (US) 112.5 gal (US) 112.5 gal (US)
    Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - -
    Axles - Rear Center Differential 2 gal (US) - -
    Hydraulic System - Including Tank 25.9 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) - -
    Engine Crankcase 2.6 gal (US) - -
    Hydraulic Tank 14.5 gal (US) 40.4 gal (US) 40.4 gal (US)
    Transmission 0.8 gal (US) 20.3 gal (US) 20.3 gal (US)
    Axles - Front Center Differential 2 gal (US) - -
    Crankcase - 9.8 gal (US) 9.8 gal (US)
    DEF Tank - 5.5 gal (US) 5.5 gal (US)
    Differential - Final Drives - Front - 24.3 gal (US) 22.2 gal (US)
    Differential - Final Drives - Rear - 24.3 gal (US) 22.4 gal (US)

    Steering
    Maximum Flow - Steering Pump 22 gal/min - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s - -
    Maximum Working Pressure - Steering Pump 3263 psi - -
    Steering Articulation Angle - Each Direction 40 ° - -

    Loader Hydraulic System
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi - -
    Maximum Flow - Implement Pump 39 gal/min - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24 gal/min - -
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi - -
    Hydraulic Cycle Time - Total Cycle Time 12.5 s - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s - -
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min - -
    Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s - -
    Relief Pressure - Tilt Cylinder 4931 psi - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32 gal/min - -
    Maximum Working Pressure - Implement Pump 4061 psi - -
    Hydraulic Cycle Time - Rackback 2.2 s - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s - -

    Transmission
    Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
    Forward and Reverse - Speed Range 3 25 mile/h - -
    Forward and Reverse - Speed Range 1* 6.3 mile/h - -
    Forward and Reverse - Speed Range 2* 12.5 mile/h - -
    Forward - 1 - 4.4 mile/h 4.3 mile/h
    Forward - 2 - 8.4 mile/h 8.3 mile/h
    Forward - 3 - 14.9 mile/h 14.6 mile/h
    Forward - 4 - 24.5 mile/h 24.5 mile/h
    Reverse - 1 - 5 mile/h 4.8 mile/h
    Reverse - 2 - 9.6 mile/h 9.4 mile/h
    Reverse - 3 - 18.3 mile/h 16.7 mile/h
    Reverse - 4 - - 24.5 mile/h

    Tires
    Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid - -
    Note (1) Other tire choices are available. Contact your Cat dealer for details. - -
    Standard Size 17.5 R25 L2 XTLA - -
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - -
    Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - -

    Axles
    Rear Oscillating ±11 degrees; Locking differential (Standard) - -
    Front Fixed; Locking differential (standard) - -

    Bucket Capacities
    Bucket Range - 4.0-14.5 m³ 5.25-19 yd³ 4.0-14.5 m³ 5.25-19 yd³

    Sound
    Note (1) - For machines in European Union countries and in countries that adopt the EU Directives. ** For machines in European Union countries and in countries that adopt the �EU Directives.�
    Note (2) - European Union Directive 2000/14/EC as amended by 2005/88/EC. ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - 110 109
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - 70 dB(A) 72 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - 107 dB(A) 112 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - 75 78
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - 70 dB(A) 72 dB(A)

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

    Operating Specifications
    Breakout Force - 51008 lbf 51008 lb
    Note (1) - For a machine configuration as defined under Weight. For a machine configuration as defined under �Weight.�
    Note (2) - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Static Tipping Load - Full 40° Turn - No Tire Deflection - 20965 kg 20965 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - 43432 lb 43432 lb

    Hydraulic System
    Implement System - Maximum Operating Pressure - 4975 psi 4975 psi
    Hydraulic Cycle Time - Total - 10.1 seconds -
    Implement System - Maximum Pump Output at 2,250 rpm - - 119 gal/min

    Dimensions
    Note - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - 8.9 ft 8.9 ft
    Centerline of Rear Axle to Hitch - 6.3 ft 6.3 ft
    Ground Clearance - 1.5 ft 1.5 ft
    Height - Top of Exhaust Pipe - 12.5 ft 12.5 ft
    Height - Top of Hood - 10.1 ft 10.1 ft
    Height - Top of ROPS - 12.7 ft 12.7 ft
    Hinge Pin Height at Carry - 2.2 ft 2.2 ft
    Hinge Pin Height at Maximum Lift - 15.7 ft 15.7 ft
    Lift Arm Clearance at Maximum Lift - 13.6 ft 13.6 ft
    Overall Length - Without Bucket - 27.5 ft 27.5 ft
    Tread Width - 8 ft 8 ft
    Wheel Base - 12.6 ft 12.6 ft
    Width over Tires (Loaded) - 10.9 ft 10.9 ft
    Rack Back at Ground - - 40 degrees
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight - 8.7 ft 2661 mm
    Centerline of Rear Axle to Hitch - 6.3 ft 6.3 ft
    Ground Clearance - 456 mm 456 mm
    Height - Top of Exhaust Pipe - 3764 mm 3764 mm
    Height - Top of Hood - 3064 mm 3064 mm
    Height - Top of ROPS - 3829 mm 3829 mm
    Hinge Pin Height at Carry - 2 ft 2.2 ft
    Hinge Pin Height at Maximum Lift - 4554 mm 4554 mm
    Lift Arm Clearance at Maximum Lift - 3881 mm 3881 mm
    Overall Length - Without Bucket - 8155 mm 8155 mm
    Tread Width - 8 ft 8 ft
    Wheel Base - 3800 mm 3800 mm
    Width over Tires (Loaded) - 10.9 ft 10.9 ft
    Rack Back at Ground - - 40 degrees
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees
    Add a Similar Product: