Engine meets Tier 4 Final/Stage V emission standards.
-
-
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
-
-
Maximum Gross Power - ISO 14396
110 HP
-
-
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
-
393 HP
-
Note (2)
-
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
Note (1)
-
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards.
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
-
1627 lb/ft
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
-
1612 lb/ft
-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
-
1539 lb/ft
-
Engine Power @ 1,700 rpm – ISO 14396:2002
-
420 HP
-
Gross Power @ 1,700 rpm – SAE J1995:2014
-
425 HP
-
Note (3)
-
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
Weights
Operating Weight
19103 lb
66877 lb
-
Note
-
Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s
-
Buckets
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
-
-
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
-
-
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
-
-
Sustainability
Recyclability
95%
98%
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005
-
-
Note (4)
*The measurements were conducted with the cab doors and windows closed.
-
-
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
-
-
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
-
-
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-
-
Service Refill Capacities
Cooling System
5.7 gal (US)
13.7 gal (US)
-
Fuel Tank
43.6 gal (US)
112.5 gal (US)
-
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-
-
Axles - Rear Center Differential
2 gal (US)
-
-
Hydraulic System - Including Tank
25.9 gal (US)
-
-
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
-
-
Engine Crankcase
2.6 gal (US)
-
-
Hydraulic Tank
14.5 gal (US)
40.4 gal (US)
-
Transmission
0.8 gal (US)
20.3 gal (US)
-
Axles - Front Center Differential
2 gal (US)
-
-
Crankcase
-
9.8 gal (US)
-
DEF Tank
-
5.5 gal (US)
-
Differential - Final Drives - Front
-
24.3 gal (US)
-
Differential - Final Drives - Rear
-
24.3 gal (US)
-
Steering
Maximum Flow - Steering Pump
22 gal/min
-
-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
-
-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.8 s
-
-
Maximum Working Pressure - Steering Pump
3263 psi
-
-
Steering Articulation Angle - Each Direction
40 °
-
-
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046 psi
-
-
Maximum Flow - Implement Pump
39 gal/min
-
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
24 gal/min
-
-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046 psi
-
-
Hydraulic Cycle Time - Total Cycle Time
12.5 s
-
-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
-
-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
-
-
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
-
-
Relief Pressure - Tilt Cylinder
4931 psi
-
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
32 gal/min
-
-
Maximum Working Pressure - Implement Pump
4061 psi
-
-
Hydraulic Cycle Time - Rackback
2.2 s
-
-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
-
-
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
For machines in European Union countries and in countries that adopt the EU Directives.
-
Note (2)
-
European Union Directive 2000/14/EC as amended by 2005/88/EC.
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
-
110
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
-
70 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
-
107 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
-
75
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
-
70 dB(A)
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
-
Operating Specifications
Breakout Force
-
51008 lbf
-
Note (1)
-
For a machine configuration as defined under Weight.
-
Note (2)
-
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
-
20965 kg
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
-
43432 lb
-
Hydraulic System
Implement System - Maximum Operating Pressure
-
4975 psi
-
Hydraulic Cycle Time - Total
-
10.1 seconds
-
Dimensions
Note
-
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.