Compare Equipment Go Back
 AD45 Underground Articulated Truck |
 R2900G Underground Mining Loader |
 AD30 Underground Mining Truck |
|
Engine |
|||
|---|---|---|---|
| Engine Model | Cat® C18 | Cat® C15 | Cat® C15 |
| Engine Power - EU Stage V Engine - ISO 14396:2002 | 598 HP | - | - |
| Engine Power - Tier 3 Engine - ISO 14396:2002 | 581 HP | 401 HP | 401 HP |
| Engine Power - VR Engine - ISO 14396:2002 | 581 HP | 401 HP | 401 HP |
| Bore | 5.7 in | 5.4 in | 5.4 in |
| Stroke | 7.2 in | 6.8 in | 6.8 in |
| Displacement | 1104.53 in³ | 927.9 in³ | 928 in³ |
| Note (1) | Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
| Note (3) | Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines. | No engine derating required up to 591 m (1,938 ft) altitude. | Engine derate will commence at an altitude of 2743 m (8,999 ft). |
| Note (4) | Optional Ventilation Reduction Package available. | Optional Ventilation Reduction Package available. | Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. |
| Note (5) | Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. | Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. |
| Note (6) | Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | - | - |
| Note (7) | *<5 % | - | - |
Operating Specifications |
|||
| Nominal Payload Capacity | 99208 lb | 37920 lb | 66139 lb |
| Gross Machine Mass | 196765 lb | 155095 lb | 132300 lb |
| Shipping Mass (Stage V Engine Model) | 96225 lb | - | - |
| Shipping Mass (Other Engine Models) | 94415 lb | - | - |
| Body Capacities | 18.0-25.1 m³ (23.5-32.8 yd³) | - | 11.3-17.5 m³ (14.8-22.9 yd³) |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | - | 88015 lb | - |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | - | 75109 lb | - |
| Breakout Force - SAE | - | 60298 lb | - |
Weights (Stage V Engine Model) |
|||
| Operating Mass | 91285 lb | - | - |
| Operating Mass - Front Axle | 64565 lb | - | - |
| Operating Mass - Rear Axle | 26720 lb | - | - |
| Operating Mass + Rated Payload | 190495 lb | - | - |
| Operating Mass + Rated Payload - Front Axle | 89235 lb | - | - |
| Operating Mass + Rated Payload - Rear Axle | 101260 lb | - | - |
Weights (Other Engine Models) |
|||
| Operating Mass | 88320 lb | - | - |
| Operating Mass - Front Axle | 61225 lb | - | - |
| Operating Mass - Rear Axle | 27095 lb | - | - |
| Operating Mass + Rated Payload | 187530 lb | - | - |
| Operating Mass + Rated Payload - Front Axle | 85355 lb | - | - |
| Operating Mass + Rated Payload - Rear Axle | 102175 lb | - | - |
Weight Distribution (Stage V Engine Model) |
|||
| Empty - Front Axle | 70.7% | - | - |
| Empty - Rear Axle | 29.3% | - | - |
| Loaded - Front Axle | 46.8% | - | - |
| Loaded - Rear Axle | 53.2% | - | - |
Weight Distribution (Other Engine Models) |
|||
| Empty - Front Axle | 69.3% | - | - |
| Empty - Rear Axle | 30.7% | - | - |
| Loaded - Front Axle | 45.5% | - | - |
| Loaded - Rear Axle | 54.5% | - | - |
Body Hoist (Stage V Engine Model) |
|||
| Raise | 15 Seconds | - | - |
| Lower | 21 Seconds | - | - |
| Total Cycle Time | 36 Seconds | - | - |
Body Hoist (Other Engine Models) |
|||
| Raise | 14 Seconds | - | - |
| Lower | 21 Seconds | - | - |
| Total Cycle Time | 35 Seconds | - | - |
Body Capacities |
|||
| Dump Body - 1 | 23.6 yd³ | - | - |
| Dump Body - 2 - Standard | 27.9 yd³ | - | - |
| Dump Body - 3 | 32.8 yd³ | - | - |
| Ejector Body | 29.9 yd³ | - | - |
| Note | Heaped SAE 2:1. | - | Heaped SAE 2:1. |
| Body 1 | - | - | 14.8 yd³ |
| Body 2 - Standard Body | - | - | 18.8 yd³ |
| Body 3 | - | - | 22.9 yd³ |
| Wide Body | - | - | 21.9 yd³ |
| Ejector Body (1) | - | - | 19.9 yd³ |
| Ejector Body (2) | - | - | 21.9 yd³ |
Turning Dimensions |
|||
| Outside Clearance Radius* | 371 in | - | - |
| Inside Clearance Radius* | 209 in | - | - |
| Frame Oscillation | 10° | - | 10 Degrees |
| Articulation Angle | 42.5° | 42.5° | 42.5 ° |
| Note | *Clearance dimensions are for reference only. | - | - |
| Outside Clearance Radius | - | 288.3 in | 337.4 in |
| Inner Clearance Radius | - | 133.2 in | 198 in |
| Axle Oscillation | - | 8° | - |
Transmission |
|||
| Forward - 1 | 4.4 mile/h | 3.4 mile/h | 3.9 mile/h |
| Forward - 2 | 5.9 mile/h | 6 mile/h | 7 mile/h |
| Forward - 3 | 8 mile/h | 10.7 mile/h | 12.9 mile/h |
| Forward - 4 | 10.8 mile/h | 18.5 mile/h | 22.8 mile/h |
| Forward - 5 | 14.6 mile/h | - | - |
| Forward - 6 | 19.7 mile/h | - | - |
| Forward - 7 | 26.4 mile/h | - | - |
| Reverse - 1 | 4.2 mile/h | 4.1 mile/h | 4.4 mile/h |
| Reverse - 2 | 5.6 mile/h | 7.3 mile/h | - |
| Note | Maximum travel speeds with standard 29.5 × R29 tires. | - | Maximum travel speeds with standard 26.5 × R25 tires. |
| Reverse - 3 | - | 13 mile/h | - |
| Reverse - 4 | - | 22 mile/h | - |
Service Refill Capacities |
|||
| Engine Crankcase - With Filter | 16.9 gal (US) | - | 9 gal (US) |
| Transmission | 15.9 gal (US) | 16.4 gal (US) | 18 gal (US) |
| Hydraulic Tank | 70.3 gal (US) | 37 gal (US) | 38 gal (US) |
| Cooling System | 22.5 gal (US) | 19.8 gal (US) | 20 gal (US) |
| Front Differential and Final Drives | 20.3 gal (US) | 31.4 gal (US) | 15 gal (US) |
| Rear Differential and Final Drives | 21.9 gal (US) | 33.5 gal (US) | 15 gal (US) |
| Fuel Tank | 201.8 gal (US) | - | 108 gal (US) |
| Engine Crankcase | - | 9 gal (US) | - |
| Front Differential and Final Drives - With Axle Oil Cooling System | - | 42 gal (US) | - |
| Rear Differential and Final Drives - With Axle Oil Cooling System | - | 44.1 gal (US) | - |
| Fuel Tank - Dual | - | 376.4 gal (US) | - |
Tires |
|||
| Tire Size | 29.5 × R29 | 29.5 × 29 | 26.5 × R25 |
Standards |
|||
| Standards | ROPS/FOPS Certified Cab | - | ROPS/FOPS Certified Cab |
| Brakes | - | ISO 3450, AS2958.1, CAN-CSA424.30-M90 | - |
| Cab - FOPS | - | ISO 3449, SAE J231, AS2294.3, EN13627 | - |
| Cab - ROPS | - | ISO 3471, SAE J1040, AS2294.2, EN13510 | - |
Final Drives |
|||
| Differential Ratio | 3.46:1 | - | 3.38:1 |
| Final Drive Ratio | 5.65:1 | - | 4.76:1 |
| Total Reduction Ratio | 19.55:1 | - | 16.13:1 |
| Note | - | - | Fully floating axles. |
Bucket Capacities |
|||
| Bucket Capacity | - | 6.3-8.9 m³ (8.2-11.6 yd³) | - |
| Dump Bucket - 1 | - | 8.2 yd³ | - |
| Dump Bucket - 2 | - | 9.4 yd³ | - |
| Dump Bucket - 3 | - | 10.9 yd³ | - |
| Dump Bucket - 4 | - | 11.6 yd³ | - |
Weights |
|||
| Operating Mass* | - | 110692 lb | - |
| Operating Mass* - Front Axle | - | 50832 lb | - |
| Operating Mass* - Rear Axle | - | 59860 lb | - |
| Operating Mass + Rated Payload* | - | 148611 lb | - |
| Operating Mass + Rated Payload* - Front Axle | - | 110716 lb | - |
| Operating Mass + Rated Payload* - Rear Axle | - | 37895 lb | - |
| Note | - | *Calculated Weight. | - |
| Empty | - | - | 63647 lb |
| Empty - Front Axle | - | - | 42944 lb |
| Empty - Rear Axle | - | - | 20704 lb |
| Loaded | - | - | 132277 lb |
| Loaded - Front Axle | - | - | 58451 lb |
| Loaded - Rear Axle | - | - | 73826 lb |
Hydraulic Cycle Times |
|||
| Raise | - | 9.2 s | - |
| Dump | - | 3.4 s | - |
| Lower, Empty, Float Down | - | 3.1 s | - |
| Total Cycle Time | - | 15.7 s | - |
Weight Distribution |
|||
| Empty - Front Axle | - | - | 67.50% |
| Empty - Rear Axle | - | - | 32.50% |
| Loaded - Front Axle | - | - | 44.20% |
| Loaded - Rear Axle | - | - | 55.80% |
Body Hoist |
|||
| Raise | - | - | 10.5 s |
| Lower | - | - | 11.2 s |
| Total Cycle Time | - | - | 21.7 s |
