Compare Equipment Go Back

AD45 Underground Articulated Truck
AD30 Underground Mining Truck

Engine

Engine Model Cat® C18 Cat® C15 -
Engine Power - EU Stage V Engine - ISO 14396:2002 598 HP - -
Engine Power - Tier 3 Engine - ISO 14396:2002 581 HP 401 HP -
Engine Power - VR Engine - ISO 14396:2002 581 HP 401 HP -
Bore 5.7 in 5.4 in -
Stroke 7.2 in 6.8 in -
Displacement 1104.53 in³ 928 in³ -
Note (1) Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. -
Note (2) All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat -
Note (3) Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines. Engine derate will commence at an altitude of 2743 m (8,999 ft). -
Note (4) Optional Ventilation Reduction Package available. Optional Ventilation Reduction package available.
Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available.
-
Note (5) Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. -
Note (6) Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards. - -
Note (7) *<5 % - -

Operating Specifications

Nominal Payload Capacity 99208 lb 66139 lb -
Gross Machine Mass 196765 lb 132300 lb -
Shipping Mass (Stage V Engine Model) 96225 lb - -
Shipping Mass (Other Engine Models) 94415 lb - -
Body Capacities 18.0-25.1 m³ (23.5-32.8 yd³) 11.3-17.5 m³ (14.8-22.9 yd³) -

Weights (Stage V Engine Model)

Operating Mass 91285 lb - -
Operating Mass - Front Axle 64565 lb - -
Operating Mass - Rear Axle 26720 lb - -
Operating Mass + Rated Payload 190495 lb - -
Operating Mass + Rated Payload - Front Axle 89235 lb - -
Operating Mass + Rated Payload - Rear Axle 101260 lb - -

Weights (Other Engine Models)

Operating Mass 88320 lb - -
Operating Mass - Front Axle 61225 lb - -
Operating Mass - Rear Axle 27095 lb - -
Operating Mass + Rated Payload 187530 lb - -
Operating Mass + Rated Payload - Front Axle 85355 lb - -
Operating Mass + Rated Payload - Rear Axle 102175 lb - -

Weight Distribution (Stage V Engine Model)

Empty - Front Axle 70.7% - -
Empty - Rear Axle 29.3% - -
Loaded - Front Axle 46.8% - -
Loaded - Rear Axle 53.2% - -

Weight Distribution (Other Engine Models)

Empty - Front Axle 69.3% - -
Empty - Rear Axle 30.7% - -
Loaded - Front Axle 45.5% - -
Loaded - Rear Axle 54.5% - -

Body Hoist (Stage V Engine Model)

Raise 15 Seconds - -
Lower 21 Seconds - -
Total Cycle Time 36 Seconds - -

Body Hoist (Other Engine Models)

Raise 14 Seconds - -
Lower 21 Seconds - -
Total Cycle Time 35 Seconds - -

Body Capacities

Dump Body - 1 23.6 yd³ - -
Dump Body - 2 - Standard 27.9 yd³ - -
Dump Body - 3 32.8 yd³ - -
Ejector Body 29.9 yd³ - -
Note Heaped SAE 2:1. Heaped SAE 2:1. -
Body 1 - 14.8 yd³ -
Body 2 - Standard Body - 18.8 yd³ -
Body 3 - 22.9 yd³ -
Wide Body - 21.9 yd³ -
Ejector Body (1) - 19.9 yd³ -
Ejector Body (2) - 21.9 yd³ -

Turning Dimensions

Outside Clearance Radius* 371 in - -
Inside Clearance Radius* 209 in - -
Frame Oscillation 10° 10 Degrees -
Articulation Angle 42.5° 42.5 ° -
Note *Clearance dimensions are for reference only. - -
Outside Clearance Radius - 337.4 in -
Inner Clearance Radius - 198 in -

Transmission

Forward - 1 4.4 mile/h 3.9 mile/h -
Forward - 2 5.9 mile/h 7 mile/h -
Forward - 3 8 mile/h 12.9 mile/h -
Forward - 4 10.8 mile/h 22.8 mile/h -
Forward - 5 14.6 mile/h - -
Forward - 6 19.7 mile/h - -
Forward - 7 26.4 mile/h - -
Reverse - 1 4.2 mile/h 4.4 mile/h -
Reverse - 2 5.6 mile/h - -
Note Maximum travel speeds with standard 29.5 × R29 tires. Maximum travel speeds with standard 26.5 × R25 tires. -

Service Refill Capacities

Engine Crankcase - With Filter 16.9 gal (US) 9 gal (US) -
Transmission 15.9 gal (US) 18 gal (US) -
Hydraulic Tank 70.3 gal (US) 38 gal (US) -
Cooling System 22.5 gal (US) 20 gal (US) -
Front Differential and Final Drives 20.3 gal (US) 15 gal (US) -
Rear Differential and Final Drives 21.9 gal (US) 15 gal (US) -
Fuel Tank 201.8 gal (US) 108 gal (US) -

Tires

Tire Size 29.5 × R29 26.5 × R25 -

Standards

Standards ROPS/FOPS Certified Cab ROPS/FOPS Certified Cab -

Final Drives

Differential Ratio 3.46:1 3.38:1 -
Final Drive Ratio 5.65:1 4.76:1 -
Total Reduction Ratio 19.55:1 16.13:1 -
Note - Fully floating axles. -

Weight Distribution

Empty - Front Axle - 67.50% -
Empty - Rear Axle - 32.50% -
Loaded - Front Axle - 44.20% -
Loaded - Rear Axle - 55.80% -

Weights

Empty - 63647 lb -
Empty - Front Axle - 42944 lb -
Empty - Rear Axle - 20704 lb -
Loaded - 132277 lb -
Loaded - Front Axle - 58451 lb -
Loaded - Rear Axle - 73826 lb -

Body Hoist

Raise - 10.5 s -
Lower - 11.2 s -
Total Cycle Time - 21.7 s -
Add a Similar Product:
  • AD63 Underground Articulated Truck Add
  • R3000H Underground Mining Loader Add
  • R2900G Underground Mining Loader Add
  • R1700 Underground Mining Loader Add
  • R1300G Underground Mining Loader Add
  • R1600H Underground Mining Loader Add