Compare Equipment Go Back
AD45 Underground Articulated Truck |
R1300G Underground Mining Loader |
AD30 Underground Mining Truck |
|
Engine |
|||
---|---|---|---|
Engine Model | Cat® C18 | Cat® 3306B DITA | Cat® C15 |
Engine Power - EU Stage V Engine - ISO 14396:2002 | 598 HP | - | - |
Engine Power - Tier 3 Engine - ISO 14396:2002 | 581 HP | - | 401 HP |
Engine Power - VR Engine - ISO 14396:2002 | 581 HP | - | 401 HP |
Bore | 5.7 in | 4.75 in | 5.4 in |
Stroke | 7.2 in | 6 in | 6.8 in |
Displacement | 1104.53 in³ | 640.75 in³ | 928 in³ |
Note (1) | Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
Note (3) | Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines. | Engine derate will commence at an altitude of 4500 m (14,763.7 ft). | Engine derate will commence at an altitude of 2743 m (8,999 ft). |
Note (4) | Optional Ventilation Reduction Package available. | - | Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. |
Note (5) | Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. | - | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. |
Note (6) | Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | - | - |
Note (7) | *<5 % | - | - |
Engine Power - ISO 14396:2002 | - | 157 HP | - |
Operating Specifications |
|||
Nominal Payload Capacity | 99208 lb | 14991 lb | 66139 lb |
Gross Machine Mass | 196765 lb | 65482 lb | 132300 lb |
Shipping Mass (Stage V Engine Model) | 96225 lb | - | - |
Shipping Mass (Other Engine Models) | 94415 lb | - | - |
Body Capacities | 18.0-25.1 m³ (23.5-32.8 yd³) | - | 11.3-17.5 m³ (14.8-22.9 yd³) |
Static Tipping Load - Straight Ahead - Lift Arms Horizontal | - | 45360 lb | - |
Static Tipping Load - Full Turn - Lift Arms Horizontal | - | 39397 lb | - |
Breakout Force - SAE | - | 26504 lb | - |
Weights (Stage V Engine Model) |
|||
Operating Mass | 91285 lb | - | - |
Operating Mass - Front Axle | 64565 lb | - | - |
Operating Mass - Rear Axle | 26720 lb | - | - |
Operating Mass + Rated Payload | 190495 lb | - | - |
Operating Mass + Rated Payload - Front Axle | 89235 lb | - | - |
Operating Mass + Rated Payload - Rear Axle | 101260 lb | - | - |
Weights (Other Engine Models) |
|||
Operating Mass | 88320 lb | - | - |
Operating Mass - Front Axle | 61225 lb | - | - |
Operating Mass - Rear Axle | 27095 lb | - | - |
Operating Mass + Rated Payload | 187530 lb | - | - |
Operating Mass + Rated Payload - Front Axle | 85355 lb | - | - |
Operating Mass + Rated Payload - Rear Axle | 102175 lb | - | - |
Weight Distribution (Stage V Engine Model) |
|||
Empty - Front Axle | 70.7% | - | - |
Empty - Rear Axle | 29.3% | - | - |
Loaded - Front Axle | 46.8% | - | - |
Loaded - Rear Axle | 53.2% | - | - |
Weight Distribution (Other Engine Models) |
|||
Empty - Front Axle | 69.3% | - | - |
Empty - Rear Axle | 30.7% | - | - |
Loaded - Front Axle | 45.5% | - | - |
Loaded - Rear Axle | 54.5% | - | - |
Body Hoist (Stage V Engine Model) |
|||
Raise | 15 Seconds | - | - |
Lower | 21 Seconds | - | - |
Total Cycle Time | 36 Seconds | - | - |
Body Hoist (Other Engine Models) |
|||
Raise | 14 Seconds | - | - |
Lower | 21 Seconds | - | - |
Total Cycle Time | 35 Seconds | - | - |
Body Capacities |
|||
Dump Body - 1 | 23.6 yd³ | - | - |
Dump Body - 2 - Standard | 27.9 yd³ | - | - |
Dump Body - 3 | 32.8 yd³ | - | - |
Ejector Body | 29.9 yd³ | - | - |
Note | Heaped SAE 2:1. | - | Heaped SAE 2:1. |
Body 1 | - | - | 14.8 yd³ |
Body 2 - Standard Body | - | - | 18.8 yd³ |
Body 3 | - | - | 22.9 yd³ |
Wide Body | - | - | 21.9 yd³ |
Ejector Body (1) | - | - | 19.9 yd³ |
Ejector Body (2) | - | - | 21.9 yd³ |
Turning Dimensions |
|||
Outside Clearance Radius* | 371 in | - | - |
Inside Clearance Radius* | 209 in | - | - |
Frame Oscillation | 10° | - | 10 Degrees |
Articulation Angle | 42.5° | 42.5° | 42.5 ° |
Note | *Clearance dimensions are for reference only. | - | - |
Outside Clearance Radius | - | 225.1 in | 337.4 in |
Inner Clearance Radius | - | 111.2 in | 198 in |
Axle Oscillation | - | 10° | - |
Transmission |
|||
Forward - 1 | 4.4 mile/h | 2.8 mile/h | 3.9 mile/h |
Forward - 2 | 5.9 mile/h | 4.8 mile/h | 7 mile/h |
Forward - 3 | 8 mile/h | 9.3 mile/h | 12.9 mile/h |
Forward - 4 | 10.8 mile/h | 16.3 mile/h | 22.8 mile/h |
Forward - 5 | 14.6 mile/h | - | - |
Forward - 6 | 19.7 mile/h | - | - |
Forward - 7 | 26.4 mile/h | - | - |
Reverse - 1 | 4.2 mile/h | 2.8 mile/h | 4.4 mile/h |
Reverse - 2 | 5.6 mile/h | 4.8 mile/h | - |
Note | Maximum travel speeds with standard 29.5 × R29 tires. | - | Maximum travel speeds with standard 26.5 × R25 tires. |
Reverse - 3 | - | 9.2 mile/h | - |
Reverse - 4 | - | 14.3 mile/h | - |
Service Refill Capacities |
|||
Engine Crankcase - With Filter | 16.9 gal (US) | 6.6 gal (US) | 9 gal (US) |
Transmission | 15.9 gal (US) | 11.9 gal (US) | 18 gal (US) |
Hydraulic Tank | 70.3 gal (US) | 23.2 gal (US) | 38 gal (US) |
Cooling System | 22.5 gal (US) | 17.7 gal (US) | 20 gal (US) |
Front Differential and Final Drives | 20.3 gal (US) | 10 gal (US) | 15 gal (US) |
Rear Differential and Final Drives | 21.9 gal (US) | 11.1 gal (US) | 15 gal (US) |
Fuel Tank | 201.8 gal (US) | 77.9 gal (US) | 108 gal (US) |
Tires |
|||
Tire Size | 29.5 × R29 | 17.5 × R25 | 26.5 × R25 |
Standards |
|||
Standards | ROPS/FOPS Certified Cab | ROPS/FOPS Certified Cab | ROPS/FOPS Certified Cab |
Final Drives |
|||
Differential Ratio | 3.46:1 | - | 3.38:1 |
Final Drive Ratio | 5.65:1 | - | 4.76:1 |
Total Reduction Ratio | 19.55:1 | - | 16.13:1 |
Note | - | - | Fully floating axles. |
Weights |
|||
Operating Mass* | - | 45691 lb | - |
Operating Mass* - Front Axle | - | 16810 lb | - |
Operating Mass* - Rear Axle | - | 28881 lb | - |
Operating Mass + Rated Payload* | - | 60682 lb | - |
Operating Mass + Rated Payload* - Front Axle | - | 41105 lb | - |
Operating Mass + Rated Payload* - Rear Axle | - | 19577 lb | - |
Note | - | *Calculated weights. | - |
Empty | - | - | 63647 lb |
Empty - Front Axle | - | - | 42944 lb |
Empty - Rear Axle | - | - | 20704 lb |
Loaded | - | - | 132277 lb |
Loaded - Front Axle | - | - | 58451 lb |
Loaded - Rear Axle | - | - | 73826 lb |
Hydraulic Cycle Times |
|||
Raise | - | 5 s | - |
Dump | - | 2 s | - |
Lower, Empty, Float Down | - | 2.3 s | - |
Total Cycle Time | - | 9.3 s | - |
Bucket Capacities |
|||
Dump Bucket - 1 | - | 3.2 yd³ | - |
Dump Bucket - 2 | - | 3.7 yd³ | - |
Dump Bucket - 3 - Standard Bucket | - | 4.1 yd³ | - |
Dump Bucket - 4 | - | 4.4 yd³ | - |
Ejector Bucket | - | 3.1 yd³ | - |
Weight Distribution |
|||
Empty - Front Axle | - | - | 67.50% |
Empty - Rear Axle | - | - | 32.50% |
Loaded - Front Axle | - | - | 44.20% |
Loaded - Rear Axle | - | - | 55.80% |
Body Hoist |
|||
Raise | - | - | 10.5 s |
Lower | - | - | 11.2 s |
Total Cycle Time | - | - | 21.7 s |