Compare Equipment Go Back
 AD30 Underground Mining Truck |
 R1600H Underground Mining Loader |
 AD45 Underground Articulated Truck |
|
Engine |
|||
|---|---|---|---|
| Engine Model | Cat® C15 | Cat® C11 | Cat® C18 |
| Engine Power - Tier 3 Engine - ISO 14396:2002 | 401 HP | 271 HP | 581 HP |
| Engine Power - VR Engine - ISO 14396:2002 | 401 HP | 271 HP | 581 HP |
| Bore | 5.4 in | 5.1 in | 5.7 in |
| Stroke | 6.8 in | 5.5 in | 7.2 in |
| Displacement | 928 in³ | 680.4 in³ | 1104.53 in³ |
| Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard. |
| Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
| Note (3) | Engine derate will commence at an altitude of 2743 m (8,999 ft). | No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. | Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines. |
| Note (4) | Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. |
Optional Ventilation Reduction package available. | Optional Ventilation Reduction Package available. |
| Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. | Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. |
| Engine Power - EU Stage V Engine - ISO 14396:2002 | - | - | 598 HP |
| Note (6) | - | - | Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
| Note (7) | - | - | *<5 % |
Operating Specifications |
|||
| Nominal Payload Capacity | 66139 lb | 22487 lb | 99208 lb |
| Gross Machine Mass | 132300 lb | 97453 lb | 196765 lb |
| Body Capacities | 11.3-17.5 m³ (14.8-22.9 yd³) | - | 18.0-25.1 m³ (23.5-32.8 yd³) |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | - | 57110 lb | - |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | - | 46067 lb | - |
| Breakout Force - Tilt (ISO) | - | 39524 lb | - |
| Breakout Force - Lift (ISO) | - | 42333 lb | - |
| Shipping Mass (Stage V Engine Model) | - | - | 96225 lb |
| Shipping Mass (Other Engine Models) | - | - | 94415 lb |
Body Capacities |
|||
| Body 1 | 14.8 yd³ | - | - |
| Body 2 - Standard Body | 18.8 yd³ | - | - |
| Body 3 | 22.9 yd³ | - | - |
| Wide Body | 21.9 yd³ | - | - |
| Ejector Body (1) | 19.9 yd³ | - | - |
| Ejector Body (2) | 21.9 yd³ | - | - |
| Note | Heaped SAE 2:1. | - | Heaped SAE 2:1. |
| Dump Body - 1 | - | - | 23.6 yd³ |
| Dump Body - 2 - Standard | - | - | 27.9 yd³ |
| Dump Body - 3 | - | - | 32.8 yd³ |
| Ejector Body | - | - | 29.9 yd³ |
Weight Distribution |
|||
| Empty - Front Axle | 67.50% | - | - |
| Empty - Rear Axle | 32.50% | - | - |
| Loaded - Front Axle | 44.20% | - | - |
| Loaded - Rear Axle | 55.80% | - | - |
Weights |
|||
| Empty | 63647 lb | - | - |
| Empty - Front Axle | 42944 lb | - | - |
| Empty - Rear Axle | 20704 lb | - | - |
| Loaded | 132277 lb | - | - |
| Loaded - Front Axle | 58451 lb | - | - |
| Loaded - Rear Axle | 73826 lb | - | - |
| Operating Mass* | - | 66469 lb | - |
| Operating Mass* - Front Axle | - | 28404 lb | - |
| Operating Mass* - Rear Axle | - | 38065 lb | - |
| Operating Mass + Rated Payload* | - | 88956 lb | - |
| Operating Mass + Rated Payload* - Front Axle | - | 62011 lb | - |
| Operating Mass + Rated Payload* - Rear Axle | - | 26944 lb | - |
| Note | - | *Calculated weights. | - |
Body Hoist |
|||
| Raise | 10.5 s | - | - |
| Lower | 11.2 s | - | - |
| Total Cycle Time | 21.7 s | - | - |
Turning Dimensions |
|||
| Outside Clearance Radius | 337.4 in | - | - |
| Inner Clearance Radius | 198 in | - | - |
| Articulation Angle | 42.5 ° | 42.5° | 42.5° |
| Frame Oscillation | 10 Degrees | - | 10° |
| Outside Clearance Radius* | - | 261.3 in | 371 in |
| Inner Clearance Radius* | - | 129.6 in | - |
| Axle Oscillation | - | 10° | - |
| Note | - | *Clearance dimensions are for reference only. | *Clearance dimensions are for reference only. |
| Inside Clearance Radius* | - | - | 209 in |
Transmission |
|||
| Forward - 1 | 3.9 mile/h | 2.8 mile/h | 4.4 mile/h |
| Forward - 2 | 7 mile/h | 5.6 mile/h | 5.9 mile/h |
| Forward - 3 | 12.9 mile/h | 10.4 mile/h | 8 mile/h |
| Forward - 4 | 22.8 mile/h | 17.1 mile/h | 10.8 mile/h |
| Reverse - 1 | 4.4 mile/h | 3.1 mile/h | 4.2 mile/h |
| Note | Maximum travel speeds with standard 26.5 × R25 tires. | - | Maximum travel speeds with standard 29.5 × R29 tires. |
| Reverse - 2 | - | 6.8 mile/h | 5.6 mile/h |
| Reverse - 3 | - | 11.8 mile/h | - |
| Reverse - 4 | - | 18.2 mile/h | - |
| Forward - 5 | - | - | 14.6 mile/h |
| Forward - 6 | - | - | 19.7 mile/h |
| Forward - 7 | - | - | 26.4 mile/h |
Service Refill Capacities |
|||
| Engine Crankcase - With Filter | 9 gal (US) | 8.98 gal (US) | 16.9 gal (US) |
| Transmission | 18 gal (US) | 12.4 gal (US) | 15.9 gal (US) |
| Hydraulic Tank | 38 gal (US) | 33 gal (US) | 70.3 gal (US) |
| Cooling System | 20 gal (US) | 16.1 gal (US) | 22.5 gal (US) |
| Front Differential and Final Drives | 15 gal (US) | 21.1 gal (US) | 20.3 gal (US) |
| Rear Differential and Final Drives | 15 gal (US) | 21.1 gal (US) | 21.9 gal (US) |
| Fuel Tank | 108 gal (US) | 105.7 gal (US) | 201.8 gal (US) |
| Secondary Fuel Tank - If Equipped | - | 87.2 gal (US) | - |
Tires |
|||
| Tire Size | 26.5 × R25 | 18 × R25 | 29.5 × R29 |
Final Drives |
|||
| Differential Ratio | 3.38:1 | - | 3.46:1 |
| Final Drive Ratio | 4.76:1 | - | 5.65:1 |
| Total Reduction Ratio | 16.13:1 | - | 19.55:1 |
| Note | Fully floating axles. | - | - |
Standards |
|||
| Standards | ROPS/FOPS Certified Cab | ROPS/FOPS Certified Cab | ROPS/FOPS Certified Cab |
Hydraulic Cycle Times |
|||
| Raise | - | 7.6 s | - |
| Dump | - | 1.6 s | - |
| Lower, Empty, Float Down | - | 2 s | - |
| Total Cycle Time | - | 11.2 s | - |
Bucket Capacities |
|||
| Bucket Capacities | - | 4.2-5.9 m³ (5.5-7.7 yd³) | - |
| Dump Bucket - 1 | - | 5.5 yd³ | - |
| Dump Bucket - 2 - Standard Bucket | - | 6.3 yd³ | - |
| Dump Bucket - 3 | - | 7.3 yd³ | - |
| Dump Bucket - 4 | - | 7.7 yd³ | - |
| Ejector Bucket | - | 6.3 yd³ | - |
| Bolt Together Bucket | - | 6.9 yd³ | - |
Weights (Stage V Engine Model) |
|||
| Operating Mass | - | - | 91285 lb |
| Operating Mass - Front Axle | - | - | 64565 lb |
| Operating Mass - Rear Axle | - | - | 26720 lb |
| Operating Mass + Rated Payload | - | - | 190495 lb |
| Operating Mass + Rated Payload - Front Axle | - | - | 89235 lb |
| Operating Mass + Rated Payload - Rear Axle | - | - | 101260 lb |
Weights (Other Engine Models) |
|||
| Operating Mass | - | - | 88320 lb |
| Operating Mass - Front Axle | - | - | 61225 lb |
| Operating Mass - Rear Axle | - | - | 27095 lb |
| Operating Mass + Rated Payload | - | - | 187530 lb |
| Operating Mass + Rated Payload - Front Axle | - | - | 85355 lb |
| Operating Mass + Rated Payload - Rear Axle | - | - | 102175 lb |
Weight Distribution (Stage V Engine Model) |
|||
| Empty - Front Axle | - | - | 70.7% |
| Empty - Rear Axle | - | - | 29.3% |
| Loaded - Front Axle | - | - | 46.8% |
| Loaded - Rear Axle | - | - | 53.2% |
Weight Distribution (Other Engine Models) |
|||
| Empty - Front Axle | - | - | 69.3% |
| Empty - Rear Axle | - | - | 30.7% |
| Loaded - Front Axle | - | - | 45.5% |
| Loaded - Rear Axle | - | - | 54.5% |
Body Hoist (Stage V Engine Model) |
|||
| Raise | - | - | 15 Seconds |
| Lower | - | - | 21 Seconds |
| Total Cycle Time | - | - | 36 Seconds |
Body Hoist (Other Engine Models) |
|||
| Raise | - | - | 14 Seconds |
| Lower | - | - | 21 Seconds |
| Total Cycle Time | - | - | 35 Seconds |
