CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    775G Off-Highway Truck
    View Product
    772 (07) Off-Highway Truck
    View Product Remove
    798 AC Electric Drive Mining Truck
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 75118 lb - -
    LRC Bare Chassis Weight with Hoist 76326 lb - -
    LRC Gross Vehicle Weight (Target) without Hoist 246503 lb - -
    LRC Gross Vehicle Weight (Target) with Hoist 246503 lb - -
    HRC Bare Chassis Weight without Hoist 76573 lb - -
    HRC Bare Chassis Weight with Hoist 77781 lb - -
    HRC Gross Vehicle Weight (Target) without Hoist 246503 lb - -
    HRC Gross Vehicle Weight (Target) with Hoist 246503 lb - -
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - -

    ROPS
    Tractor ROPS 85288 lb - -
    FOPS Standards - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. -
    ROPS Standards - ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. -

    Operating Specifications
    Nominal Water Tank Capacity 15000 gal (US) - -
    Nominal Payload Class (100%) - 51.6 ton (US) -
    Top Speed - Loaded - 49.2 mile/h -
    Maximum Payload Class (110%) - 56.7 ton (US) -
    Body Capacity - SAE 2:1 - 40.8 yd³ -
    Target Payload Capacity - 51.6 ton (US) -
    Not to Exceed Payload (120%) - 61.9 ton (US) -
    Body Capacity (SAE 2:1)** - 40.8 yd³ -

    Steering
    Steering Standards ISO 5010:2007 ISO 5010:2007 Steering Standards: ISO 5010:2007
    Steer Angle 31 ° 40.5 ° 39 °
    Turning Diameter 77.1 ft - -
    Turning Circle - Clearance Diameter 85.6 ft 66.6 ft -
    Turning Diameter - Front - 57.7 ft 106.3 ft
    Note - - Turning Diameter (ISO 7457:1997)

    Engine
    Engine Model Cat® C27 Cat® C18 Cat® C175-16
    Gross Power - SAE J1995 825 HP 605 HP 3500 HP
    Rated Net Power - SAE J1349 683 HP - -
    Bore 5.4 in 5.7 in 6.9 in
    Stroke 6 in 7.2 in 8.7 in
    Displacement 1648 in³ 1105 in³ 5187 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. - -
    Rated Engine Speed - 1700 r/min -
    Net Power - SAE J1349 - 550 HP 3405 HP
    Net Power - ISO 9249 - 550 HP -
    Number of Cylinders - 6 -
    Net Torque - SAE J1349 - 2221 ft-lb -
    Engine Power - ISO 14396 - 598 HP -
    Optional Gross Power - SAE J1995 - - 3100 HP
    Rated Speed - - 1800 r/min
    Emissions Rating - - Fuel Optimized
    Note (1) - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) - - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) - - Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp

    Transmission
    Forward - 1 6.6 mile/h 8 mile/h -
    Forward - 2 9.3 mile/h 10.9 mile/h -
    Forward - 3 12.6 mile/h 14.8 mile/h -
    Forward - 4 16.8 mile/h 19.8 mile/h -
    Forward - 5 22.8 mile/h 26.9 mile/h -
    Forward - 6 30.7 mile/h 36.2 mile/h -
    Forward - 7 41.6 mile/h 49.2 mile/h -
    Reverse 8.7 mile/h 10.4 mile/h -
    Note Maximum travel speeds with standard 24.00R35 (E4) tires - -

    Brakes
    Brake Surface - Front 257 in² 216 in² -
    Brake Surface - Rear 9497 in² 7794 in² -
    Brake Standards - ISO 3450:1996 -

    Service Refill Capacities
    Fuel Tank Capacity 210 gal (US) - -
    Cooling System 45 gal (US) 33 gal (US) 211 gal (US)
    Crankcase 24 gal (US) 17 gal (US) 82 gal (US)
    Differential - Final Drives 38 gal (US) 47 gal (US) -
    Steering System - Including Tank 14 gal (US) 23 gal (US) -
    Brake/Hoist Hydraulic Tank 46.5 gal (US) 38 gal (US) -
    Brake Hoist System 85 gal (US) 60 gal (US) -
    Fuel Tank - 140 gal (US) 1300 gal (US)
    Steering Tank - 14.5 gal (US) -
    Torque Converter - Transmission System - 17 gal (US) -
    DEF Tank - 6 gal (US) -
    Fuel Tank (Tier 4) - - 1200 gal (US)
    Diesel Exhaust Fluid Tank - - 100 gal (US)
    Final Drive - Each - - 67 gal (US)
    Hydraulic System - Including Tank - - 385 gal (US)
    Hydraulic Tank - - 296 gal (US)
    Grease Tank - - 90 lb
    Note (1) - - DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option

    Weights - Approximate
    Target Gross Machine Operating Weight - 181000 lb -
    Chassis Weight - 59223 lb 453826 lb
    Body Weight - 17306 lb -
    Target Gross Machine Weight - 181000 lb -
    Nominal Rated Payload - - 410 ton (US)
    Rated Gross Machine Weight - - 1375000 lb
    Body Weight Range - - 38 833 - 43 275 kg (85,611 - 95,406 lb)
    Note (1) - - Consult your tire manufacturer for maximum tire load.
    Note (2) - - Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.
    Note (3) - - Body weight varies depending on how body is equipped.

    Weight Distributions - Approximate
    Front Axle - Empty - 51.4 % 47 %
    Front Axle - Loaded - 34.2 % 33 %
    Rear Axle - Empty - 48.6 % 53 %
    Rear Axle - Loaded - 65.8 % 67 %
    Note - - Weight distributions optimized with Cat body.

    Final Drives
    Differential Ratio - 2.74:1 -
    Planetary Ratio - 4.80:1 -
    Total Reduction Ratio - 13.14:1 -

    Body Hoists
    Pump Flow - High Idle - 112 gal/min 257.3 gal/min
    Relief Valve Setting - Raise - 2750 psi 3029 psi
    Relief Valve Setting - Lower - 500 psi -
    Body Raise Time - High Idle - 8 s 21 s
    Body Lower Time - Float - 10 s 22 s
    Body Power Down - High Idle - 10 s -
    Type - - Twin, two-stage hydraulic cylinders with snubbing valve.
    Body Power Down- High Idle - - 17.5 s
    Note (1) - - Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
    Note (2) - - Power raise in both stages; power down capability in both stages.
    Note (3) - - Automatic body-lower modulation reduces impact on frame.

    Suspension
    Rear axle - Oscillation - 8.9 ° -
    Empty Loaded Cylinder Stroke Front - 9.2 in -
    Empty Loaded Cylinder Stroke Rear - 5.8 in -
    Type - - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front - - 10 in
    Effective Cylinder Stroke - Rear - - 5 in

    Capacity - Dual Slope - 100% Fill Factor
    Heaped 2:1 (SAE) - 40.8 yd³ -
    Struck - 31.3 yd³ -

    Capacity - Flat Floor - 100% Fill Factor
    Struck - 31.3 yd³ -
    Heaped 2:1 (SAE) - 40.9 yd³ -

    Sound
    Sound Standards (3) - Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. -
    Sound Standards (2) - Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A). -
    Sound Standards (1) - Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. -
    Sound Standards - - The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.

    Dimensions
    Height - Top of ROPS - 12.8 ft -
    Inside Body Depth - Maximum - 5.7 ft -
    Overall Body Length - 26.8 ft -
    Inside Body Length - 19 ft -
    Overall Length - 28.9 ft -
    Wheel Base - 13 ft -
    Rear Axle - Tail - 9.5 ft -
    Ground Clearance - 1.6 in -
    Dump Clearance - 1.5 ft -
    Loading Height - Empty - 11.6 ft -
    Overall Height - Body Raised - 27.1 ft -
    Operating Width - 15.7 ft -
    Centerline Front Tire Width - 10.4 ft -
    Engine Guard Clearance - 2 ft -
    Outside Body Width - 12.9 ft -
    Inside Body Width - 11.9 ft -
    Front Canopy Height - 13.7 ft -
    Rear Axle - Clearance - 1.9 ft -
    Centerline of Rear Dual Tire Width - 8.7 ft -
    Overall Tire Width - 12.9 ft -

    Tires
    Standard Tire - 21.00R33 (E4) -
    Rims - - 44" x 63" Rims
    Standard Tires - - 59/80 R63
    Note (1) - - Quick Change Rims optional.
    Note (2) - - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

    Service Refill Capacities - High Altitude Only
    Fuel Tank - - 2000 gal (US)
    Cooling System - - 273 gal (US)
    Crankcase - - 124 gal (US)
    Hydraulic Tank - - 273 gal (US)
    Hydraulic System (includes tank) - - 342 gal (US)

    AC Drive System
    Total Reduction Ratio - - 35:01:00
    Top Speed - Loaded - - 40 mile/h
    Generator/Alternator - - Brushless, engine mounted, dual bearing
    Controls - - IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
    Wheel Motor - - Cat high-torque AC induction, rear axle mounted
    Cooling System - - Cat variable speed, hydraulically driven cooling system

    Braking System
    Service Brakes - - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area - - 22642 in²
    Rear - Wet Disc Brake Surface Area - - 32730 in²
    Standards - - Service and Secondary: ISO 3450:2011
    Electric Retarding - - Radial Grid Design
    Dynamic Retarding Power - Continuous - - 5480 HP
    Parking Brakes - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released
    Load Brake - - Rear service brakes
    Note - - Anti-Lock Brake System (ABS) optional with CMD package

    Capacity - HE Body - 100% fill factor
    Struck - - 129-200 m³ (168-261 yd³)
    Heaped (SAE 2:1) - - 218-276 m³ (285-361 yd³)
    Note - - Contact your local Cat dealer for body recommendations.

    Cab
    Air Conditioning - - HFC - 134A refrigerant: 21,600 Btu/h
    Heater / Defroster - - 24600 Btu/h
    Note - - Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
    ROPS Standards (1) - - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    FOPS Standards - - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Engine - High Altitude Only
    Engine Model - - Cat® C175-20
    Gross Power SAE J1995:2014 - - 4150 HP
    Net Power - SAE J1349:2011 - - 4000 HP
    Rated Speed - - 1750 r/min
    Emissions Rating - - Fuel Optimized
    Bore - - 6.9 in
    Stroke - - 8.7 in
    Displacement - - 6469 in³
    Note 1 - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note 2 - - Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp

    Dimensions (Approximate)
    Height - Top of ROPS - - 22.1 ft
    Overall Length - - 51.44 ft
    Wheel Base - - 21.9 ft
    Rear Axle - Tail - - 16.07 ft
    Dump Clearance - Empty - - 5.72 ft
    Loading Height - Empty - - 25.54 ft
    Overall Height - Body Raised - - 48.85 ft
    Centerline Front Tire Width - - 23.06 ft
    Front Axle Clearance - Loaded - - 2.81 ft
    Overall Canopy Width (with rock deflectors) - - 33.15 ft
    Outside Body/Canopy Width (without rock deflectors) - - 31.62 ft
    Inside Body Width - - 29.44 ft
    Front Canopy Height - Empty - - 26.01 ft
    Rear Axle Clearance - Loaded - - 2.8 ft
    Centerline of Rear Dual Tire Width - - 19.5 ft
    Overall Tire Width - Empty - - 30.27 ft
    Overall Length (High Altitude only) - - 51.87 ft
    Note - - Dimensions listed includes canopy deflectors
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 796 AC Electric Drive Mining Truck Add
    • 797F Mining Truck Add
    • 793F Mining Truck Add
    • 794 AC Mining Truck Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add
    • 789 Next Generation Add