Compare Equipment Go Back
 775G Off-Highway Truck |
 798 AC Electric Drive Mining Truck |
|
|
Weights |
|||
|---|---|---|---|
| LRC Bare Chassis Weight without Hoist | 75118 lb | - | - |
| LRC Bare Chassis Weight with Hoist | 76326 lb | - | - |
| LRC Gross Vehicle Weight (Target) without Hoist | 246503 lb | - | - |
| LRC Gross Vehicle Weight (Target) with Hoist | 246503 lb | - | - |
| HRC Bare Chassis Weight without Hoist | 76573 lb | - | - |
| HRC Bare Chassis Weight with Hoist | 77781 lb | - | - |
| HRC Gross Vehicle Weight (Target) without Hoist | 246503 lb | - | - |
| HRC Gross Vehicle Weight (Target) with Hoist | 246503 lb | - | - |
| Note | LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - | - |
ROPS |
|||
| Tractor ROPS | 85288 lb | - | - |
Operating Specifications |
|||
| Nominal Water Tank Capacity | 15000 gal (US) | - | - |
Steering |
|||
| Steering Standards | ISO 5010:2007 | Steering Standards: ISO 5010:2007 | - |
| Steer Angle | 31 ° | 39 ° | - |
| Turning Diameter | 77.1 ft | - | - |
| Turning Circle - Clearance Diameter | 85.6 ft | - | - |
| Turning Diameter - Front | - | 106.3 ft | - |
| Note | - | Turning Diameter (ISO 7457:1997) | - |
Engine |
|||
| Engine Model | Cat® C27 | Cat® C175-16 | - |
| Gross Power - SAE J1995 | 825 HP | 3500 HP | - |
| Rated Net Power - SAE J1349 | 683 HP | - | - |
| Bore | 5.4 in | 6.9 in | - |
| Stroke | 6 in | 8.7 in | - |
| Displacement | 1648 in³ | 5187 in³ | - |
| Note | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. | - | - |
| Net Power - SAE J1349 | - | 3405 HP | - |
| Optional Gross Power - SAE J1995 | - | 3100 HP | - |
| Rated Speed | - | 1800 r/min | - |
| Emissions Rating | - | Fuel Optimized | - |
| Note (1) | - | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - |
| Note (2) | - | U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - |
| Note (3) | - | Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp | - |
Transmission |
|||
| Forward - 1 | 6.6 mile/h | - | - |
| Forward - 2 | 9.3 mile/h | - | - |
| Forward - 3 | 12.6 mile/h | - | - |
| Forward - 4 | 16.8 mile/h | - | - |
| Forward - 5 | 22.8 mile/h | - | - |
| Forward - 6 | 30.7 mile/h | - | - |
| Forward - 7 | 41.6 mile/h | - | - |
| Reverse | 8.7 mile/h | - | - |
| Note | Maximum travel speeds with standard 24.00R35 (E4) tires | - | - |
Brakes |
|||
| Brake Surface - Front | 257 in² | - | - |
| Brake Surface - Rear | 9497 in² | - | - |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 210 gal (US) | - | - |
| Cooling System | 45 gal (US) | 211 gal (US) | - |
| Crankcase | 24 gal (US) | 82 gal (US) | - |
| Differential - Final Drives | 38 gal (US) | - | - |
| Steering System - Including Tank | 14 gal (US) | - | - |
| Brake/Hoist Hydraulic Tank | 46.5 gal (US) | - | - |
| Brake Hoist System | 85 gal (US) | - | - |
| Fuel Tank | - | 1300 gal (US) | - |
| Fuel Tank (Tier 4) | - | 1200 gal (US) | - |
| Diesel Exhaust Fluid Tank | - | 100 gal (US) | - |
| Final Drive - Each | - | 67 gal (US) | - |
| Hydraulic System - Including Tank | - | 385 gal (US) | - |
| Hydraulic Tank | - | 296 gal (US) | - |
| Grease Tank | - | 90 lb | - |
| Note (1) | - | DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option | - |
Weights - Approximate |
|||
| Nominal Rated Payload | - | 410 ton (US) | - |
| Rated Gross Machine Weight | - | 1375000 lb | - |
| Chassis Weight | - | 453826 lb | - |
| Body Weight Range | - | 38 833 - 43 275 kg (85,611 - 95,406 lb) | - |
| Note (1) | - | Consult your tire manufacturer for maximum tire load. | - |
| Note (2) | - | Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. | - |
| Note (3) | - | Body weight varies depending on how body is equipped. | - |
Service Refill Capacities - High Altitude Only |
|||
| Fuel Tank | - | 2000 gal (US) | - |
| Cooling System | - | 273 gal (US) | - |
| Crankcase | - | 124 gal (US) | - |
| Hydraulic Tank | - | 273 gal (US) | - |
| Hydraulic System (includes tank) | - | 342 gal (US) | - |
AC Drive System |
|||
| Total Reduction Ratio | - | 35:01:00 | - |
| Top Speed - Loaded | - | 40 mile/h | - |
| Generator/Alternator | - | Brushless, engine mounted, dual bearing | - |
| Controls | - | IGBT Inverter Technology, air cooled, pressurized cabinet with filtration | - |
| Wheel Motor | - | Cat high-torque AC induction, rear axle mounted | - |
| Cooling System | - | Cat variable speed, hydraulically driven cooling system | - |
Braking System |
|||
| Service Brakes | - | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | - |
| Front Wet Disc Brake Surface Area | - | 22642 in² | - |
| Rear - Wet Disc Brake Surface Area | - | 32730 in² | - |
| Standards | - | Service and Secondary: ISO 3450:2011 | - |
| Electric Retarding | - | Radial Grid Design | - |
| Dynamic Retarding Power - Continuous | - | 5480 HP | - |
| Parking Brakes | - | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | - |
| Load Brake | - | Rear service brakes | - |
| Note | - | Anti-Lock Brake System (ABS) optional with CMD package | - |
Weight Distributions - Approximate |
|||
| Front Axle - Empty | - | 47 % | - |
| Rear Axle - Empty | - | 53 % | - |
| Front Axle - Loaded | - | 33 % | - |
| Rear Axle - Loaded | - | 67 % | - |
| Note | - | Weight distributions optimized with Cat body. | - |
Capacity - HE Body - 100% fill factor |
|||
| Struck | - | 129-200 m³ (168-261 yd³) | - |
| Heaped (SAE 2:1) | - | 218-276 m³ (285-361 yd³) | - |
| Note | - | Contact your local Cat dealer for body recommendations. | - |
Body Hoists |
|||
| Type | - | Twin, two-stage hydraulic cylinders with snubbing valve. | - |
| Pump Flow - High Idle | - | 257.3 gal/min | - |
| Relief Valve Setting - Raise | - | 3029 psi | - |
| Body Raise Time - High Idle | - | 21 s | - |
| Body Lower Time - Float | - | 22 s | - |
| Body Power Down- High Idle | - | 17.5 s | - |
| Note (1) | - | Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. | - |
| Note (2) | - | Power raise in both stages; power down capability in both stages. | - |
| Note (3) | - | Automatic body-lower modulation reduces impact on frame. | - |
Suspension |
|||
| Type | - | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments | - |
| Effective Cylinder Stroke - Front | - | 10 in | - |
| Effective Cylinder Stroke - Rear | - | 5 in | - |
Cab |
|||
| Air Conditioning | - | HFC - 134A refrigerant: 21,600 Btu/h | - |
| Heater / Defroster | - | 24600 Btu/h | - |
| Note | - | Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. | - |
| ROPS Standards (1) | - | ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. | - |
| FOPS Standards | - | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. | - |
Engine - High Altitude Only |
|||
| Engine Model | - | Cat® C175-20 | - |
| Gross Power SAE J1995:2014 | - | 4150 HP | - |
| Net Power - SAE J1349:2011 | - | 4000 HP | - |
| Rated Speed | - | 1750 r/min | - |
| Emissions Rating | - | Fuel Optimized | - |
| Bore | - | 6.9 in | - |
| Stroke | - | 8.7 in | - |
| Displacement | - | 6469 in³ | - |
| Note 1 | - | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - |
| Note 2 | - | Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp | - |
Tires |
|||
| Rims | - | 44" x 63" Rims | - |
| Standard Tires | - | 59/80 R63 | - |
| Note (1) | - | Quick Change Rims optional. | - |
| Note (2) | - | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | - |
Dimensions (Approximate) |
|||
| Height - Top of ROPS | - | 22.1 ft | - |
| Overall Length | - | 51.44 ft | - |
| Wheel Base | - | 21.9 ft | - |
| Rear Axle - Tail | - | 16.07 ft | - |
| Dump Clearance - Empty | - | 5.72 ft | - |
| Loading Height - Empty | - | 25.54 ft | - |
| Overall Height - Body Raised | - | 48.85 ft | - |
| Centerline Front Tire Width | - | 23.06 ft | - |
| Front Axle Clearance - Loaded | - | 2.81 ft | - |
| Overall Canopy Width (with rock deflectors) | - | 33.15 ft | - |
| Outside Body/Canopy Width (without rock deflectors) | - | 31.62 ft | - |
| Inside Body Width | - | 29.44 ft | - |
| Front Canopy Height - Empty | - | 26.01 ft | - |
| Rear Axle Clearance - Loaded | - | 2.8 ft | - |
| Centerline of Rear Dual Tire Width | - | 19.5 ft | - |
| Overall Tire Width - Empty | - | 30.27 ft | - |
| Overall Length (High Altitude only) | - | 51.87 ft | - |
| Note | - | Dimensions listed includes canopy deflectors | - |
Sound |
|||
| Sound Standards | - | The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. | - |
Add a Similar Product:
