|
|
798 AC Electric Drive Mining Truck
|
785 Mining Truck (LRC, Tier 4 Final / EU Stage V)
|
Weights |
| LRC Bare Chassis Weight without Hoist |
75118 lb |
- |
- |
| LRC Bare Chassis Weight with Hoist |
76326 lb |
- |
- |
| LRC Gross Vehicle Weight (Target) without Hoist |
246503 lb |
- |
- |
| LRC Gross Vehicle Weight (Target) with Hoist |
246503 lb |
- |
- |
| HRC Bare Chassis Weight without Hoist |
76573 lb |
- |
- |
| HRC Bare Chassis Weight with Hoist |
77781 lb |
- |
- |
| HRC Gross Vehicle Weight (Target) without Hoist |
246503 lb |
- |
- |
| HRC Gross Vehicle Weight (Target) with Hoist |
246503 lb |
- |
- |
| Note |
LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. |
- |
- |
ROPS |
| Tractor ROPS |
85288 lb |
- |
- |
Operating Specifications |
| Nominal Water Tank Capacity |
15000 gal (US) |
- |
- |
Steering |
| Steering Standards |
ISO 5010:2007 |
Steering Standards: ISO 5010:2007 |
ISO 5010:2007 |
| Steer Angle |
31 ° |
39 ° |
36 ° |
| Turning Diameter |
77.1 ft |
- |
- |
| Turning Circle - Clearance Diameter |
85.6 ft |
- |
- |
| Turning Diameter - Front |
- |
106.3 ft |
- |
| Note |
- |
Turning Diameter (ISO 7457:1997) |
- |
| Turning Diameter - ISO 7457:1997 (33.00R51 tires) |
- |
- |
97.75 ft |
Engine |
| Engine Model |
Cat® C27 |
Cat® C175-16 |
Cat� 3512E |
| Gross Power - SAE J1995 |
825 HP |
3500 HP |
1600 HP |
| Rated Net Power - SAE J1349 |
683 HP |
- |
- |
| Bore |
5.4 in |
6.9 in |
6.7 in |
| Stroke |
6 in |
8.7 in |
8.5 in |
| Displacement |
1648 in³ |
5187 in³ |
3573 in³ |
| Note |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. |
- |
- |
| Net Power - SAE J1349 |
- |
3405 HP |
1509 HP |
| Optional Gross Power - SAE J1995 |
- |
3100 HP |
- |
| Rated Speed |
- |
1800 r/min |
- |
| Emissions Rating |
- |
Fuel Optimized |
Fuel Optimized |
| Note (1) |
- |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
| Note (2) |
- |
U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. |
U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. |
| Note (3) |
- |
Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp |
Additional fuel optimized selectable power ratings: 1,450 hp |
Transmission |
| Forward - 1 |
6.6 mile/h |
- |
7.5 mile/h |
| Forward - 2 |
9.3 mile/h |
- |
10.2 mile/h |
| Forward - 3 |
12.6 mile/h |
- |
13.8 mile/h |
| Forward - 4 |
16.8 mile/h |
- |
18.6 mile/h |
| Forward - 5 |
22.8 mile/h |
- |
25.2 mile/h |
| Forward - 6 |
30.7 mile/h |
- |
34 mile/h |
| Forward - 7 |
41.6 mile/h |
- |
- |
| Reverse |
8.7 mile/h |
- |
6.8 mile/h |
| Note |
Maximum travel speeds with standard 24.00R35 (E4) tires |
- |
Maximum travel speeds with standard 33.00-R51 tires. |
| Top Speed - Loaded |
- |
- |
34 mile/h |
Brakes |
| Brake Surface - Front |
257 in² |
- |
- |
| Brake Surface - Rear |
9497 in² |
- |
- |
Service Refill Capacities |
| Fuel Tank Capacity |
210 gal (US) |
- |
- |
| Cooling System |
45 gal (US) |
211 gal (US) |
100 gal (US) |
| Crankcase |
24 gal (US) |
82 gal (US) |
54 gal (US) |
| Differential - Final Drives |
38 gal (US) |
- |
139 gal (US) |
| Steering System - Including Tank |
14 gal (US) |
- |
- |
| Brake/Hoist Hydraulic Tank |
46.5 gal (US) |
- |
- |
| Brake Hoist System |
85 gal (US) |
- |
- |
| Fuel Tank |
- |
1300 gal (US) |
410 gal (US) |
| Fuel Tank (Tier 4) |
- |
1200 gal (US) |
- |
| Diesel Exhaust Fluid Tank |
- |
100 gal (US) |
- |
| Final Drive - Each |
- |
67 gal (US) |
- |
| Hydraulic System - Including Tank |
- |
385 gal (US) |
- |
| Hydraulic Tank |
- |
296 gal (US) |
- |
| Grease Tank |
- |
90 lb |
- |
| Note (1) |
- |
DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option |
- |
| Front Wheels - Each |
- |
- |
8 gal (US) |
| Steering Tank |
- |
- |
29 gal (US) |
| Steering System - Includes Tank |
- |
- |
45 gal (US) |
| Brake/Hoist Tank |
- |
- |
135 gal (US) |
| Brake Hoist System - Includes Tank |
- |
- |
160 gal (US) |
| Torque Converter - Transmission System - Including Sump |
- |
- |
46 gal (US) |
Weights - Approximate |
| Nominal Rated Payload |
- |
410 ton (US) |
- |
| Rated Gross Machine Weight |
- |
1375000 lb |
- |
| Chassis Weight |
- |
453826 lb |
- |
| Body Weight Range |
- |
38 833 - 43 275 kg (85,611 - 95,406 lb) |
- |
| Note (1) |
- |
Consult your tire manufacturer for maximum tire load. |
Consult your tire manufacturer for maximum tire load |
| Note (2) |
- |
Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. |
Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. |
| Note (3) |
- |
Body weight varies depending on how body is equipped. |
Body weight varies depending on body selection and configuration. |
| Nominal Rated Payload (33.00R51 Tires) |
- |
- |
153 ton (US) |
| Rated Gross Machine Weight (33.00R51 tires) |
- |
- |
550000 lb |
| Nominal Rated Payload (36.00R51 Tires) |
- |
- |
157 ton (US) |
| Rated Gross Machine Weight (36.00R51 tires) |
- |
- |
564000 lb |
| Chassis Weight (33.00R51 Tires) |
- |
- |
186799 lb |
| Chassis Weight (36.00R51 Tires) |
- |
- |
193192 lb |
| Body Weight |
- |
- |
57779 lb |
Service Refill Capacities - High Altitude Only |
| Fuel Tank |
- |
2000 gal (US) |
- |
| Cooling System |
- |
273 gal (US) |
- |
| Crankcase |
- |
124 gal (US) |
- |
| Hydraulic Tank |
- |
273 gal (US) |
- |
| Hydraulic System (includes tank) |
- |
342 gal (US) |
- |
AC Drive System |
| Total Reduction Ratio |
- |
35:01:00 |
- |
| Top Speed - Loaded |
- |
40 mile/h |
- |
| Generator/Alternator |
- |
Brushless, engine mounted, dual bearing |
- |
| Controls |
- |
IGBT Inverter Technology, air cooled, pressurized cabinet with filtration |
- |
| Wheel Motor |
- |
Cat high-torque AC induction, rear axle mounted |
- |
| Cooling System |
- |
Cat variable speed, hydraulically driven cooling system |
- |
Braking System |
| Service Brakes |
- |
Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
| Front Wet Disc Brake Surface Area |
- |
22642 in² |
9487 in² |
| Rear - Wet Disc Brake Surface Area |
- |
32730 in² |
13908 in² |
| Standards |
- |
Service and Secondary: ISO 3450:2011 |
Service and Secondary: ISO 3450:2011 |
| Electric Retarding |
- |
Radial Grid Design |
- |
| Dynamic Retarding Power - Continuous |
- |
5480 HP |
- |
| Parking Brakes |
- |
Four-corner, Multi-disc, Spring Applied, Hydraulically Released |
- |
| Load Brake |
- |
Rear service brakes |
- |
| Note |
- |
Anti-Lock Brake System (ABS) optional with CMD package |
- |
| Parking Brake |
- |
- |
Four corner, multi disc, spring applied, hydraulically released |
Weight Distributions - Approximate |
| Front Axle - Empty |
- |
47 % |
48% |
| Rear Axle - Empty |
- |
53 % |
52% |
| Front Axle - Loaded |
- |
33 % |
33% |
| Rear Axle - Loaded |
- |
67 % |
67% |
| Note |
- |
Weight distributions optimized with Cat body. |
Weight distributions optimized with Cat body. |
Capacity - HE Body - 100% fill factor |
| Struck |
- |
129-200 m³ (168-261 yd³) |
- |
| Heaped (SAE 2:1) |
- |
218-276 m³ (285-361 yd³) |
- |
| Note |
- |
Contact your local Cat dealer for body recommendations. |
- |
Body Hoists |
| Type |
- |
Twin, two-stage hydraulic cylinders with snubbing valve. |
Twin, two-stage hydraulic cylinders with snubbing valve. |
| Pump Flow - High Idle |
- |
257.3 gal/min |
192.7 gal/min |
| Relief Valve Setting - Raise |
- |
3029 psi |
2500 psi |
| Body Raise Time - High Idle |
- |
21 s |
15.2 s |
| Body Lower Time - Float |
- |
22 s |
- |
| Body Power Down- High Idle |
- |
17.5 s |
15.9 s |
| Note (1) |
- |
Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. |
- |
| Note (2) |
- |
Power raise in both stages; power down capability in both stages. |
- |
| Note (3) |
- |
Automatic body-lower modulation reduces impact on frame. |
- |
| Body Lower Time - Float High Idle |
- |
- |
15.9 s |
| Body Lower Time - Float Low Idle |
- |
- |
16.2 s |
Suspension |
| Type |
- |
Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments |
Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments |
| Effective Cylinder Stroke - Front |
- |
10 in |
12.6 in |
| Effective Cylinder Stroke - Rear |
- |
5 in |
6.5 in |
| Rear axle - Oscillation |
- |
- |
+/- 5 degrees |
Cab |
| Air Conditioning |
- |
HFC - 134A refrigerant: 21,600 Btu/h |
HFC - 134A refrigerant: 24,500 Btu/h |
| Heater / Defroster |
- |
24600 Btu/h |
33300 Btu/h |
| Note |
- |
Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. |
The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008. |
| ROPS Standards (1) |
- |
ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. |
ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. |
| FOPS Standards |
- |
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. |
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. |
Engine - High Altitude Only |
| Engine Model |
- |
Cat® C175-20 |
- |
| Gross Power SAE J1995:2014 |
- |
4150 HP |
- |
| Net Power - SAE J1349:2011 |
- |
4000 HP |
- |
| Rated Speed |
- |
1750 r/min |
- |
| Emissions Rating |
- |
Fuel Optimized |
- |
| Bore |
- |
6.9 in |
- |
| Stroke |
- |
8.7 in |
- |
| Displacement |
- |
6469 in³ |
- |
| Note 1 |
- |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
- |
| Note 2 |
- |
Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp |
- |
Tires |
| Rims |
- |
44" x 63" Rims |
610 mm (24") Rims (standard). 660 mm (26") Rims (optional). |
| Standard Tires |
- |
59/80 R63 |
- |
| Note (1) |
- |
Quick Change Rims optional. |
Quick Change Rims optional. |
| Note (2) |
- |
Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
| Standard Tire |
- |
- |
33.00R51 |
| Optional Tire |
- |
- |
36.00R51 |
Dimensions (Approximate) |
| Height - Top of ROPS |
- |
22.1 ft |
- |
| Overall Length |
- |
51.44 ft |
- |
| Wheel Base |
- |
21.9 ft |
- |
| Rear Axle - Tail |
- |
16.07 ft |
- |
| Dump Clearance - Empty |
- |
5.72 ft |
- |
| Loading Height - Empty |
- |
25.54 ft |
- |
| Overall Height - Body Raised |
- |
48.85 ft |
- |
| Centerline Front Tire Width |
- |
23.06 ft |
- |
| Front Axle Clearance - Loaded |
- |
2.81 ft |
- |
| Overall Canopy Width (with rock deflectors) |
- |
33.15 ft |
- |
| Outside Body/Canopy Width (without rock deflectors) |
- |
31.62 ft |
- |
| Inside Body Width |
- |
29.44 ft |
- |
| Front Canopy Height - Empty |
- |
26.01 ft |
- |
| Rear Axle Clearance - Loaded |
- |
2.8 ft |
- |
| Centerline of Rear Dual Tire Width |
- |
19.5 ft |
- |
| Overall Tire Width - Empty |
- |
30.27 ft |
- |
| Overall Length (High Altitude only) |
- |
51.87 ft |
- |
| Note |
- |
Dimensions listed includes canopy deflectors |
- |
Sound |
| Sound Standards |
- |
The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. |
- |
Final Drives |
| Type |
- |
- |
Double reduction, planetary with full floating axles. |
| Differential Ratio |
- |
- |
2:10:01 |
| Planetary Ratio |
- |
- |
10.83:1 |
| Total Reduction Ratio |
- |
- |
22.75:1 |
Capacity - MSD II - 100% Fill Factor |
| Struck |
- |
- |
72 m^3 / 94 yd^3 |
| Heaped (SAE 2:1) |
- |
- |
99 m^3 / 129 yd^3 |
| Note |
- |
- |
Consult your local Cat dealer for body recommendations. |
Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.) |
| Height - Top of ROPS |
- |
- |
17.09 ft |
| Overall Body Length |
- |
- |
39.32 ft |
| Inside Body Length |
- |
- |
27.29 ft |
| Overall Length |
- |
- |
39.23 ft |
| Wheel Base |
- |
- |
17 ft |
| Rear Axle - Tail |
- |
- |
12.56 ft |
| Ground Clearance |
- |
- |
3.29 ft |
| Dump Clearance |
- |
- |
3.7 ft |
| Loading Height - Empty |
- |
- |
17.39 ft |
| Inside Body Depth - Maximum |
- |
- |
9.15 ft |
| Overall Height - Body Raised |
- |
- |
39.48 ft |
| Operating Width |
- |
- |
24.72 ft |
| Centerline Front Tire Width |
- |
- |
15.91 ft |
| Engine Guard Clearance |
- |
- |
3.41 ft |
| Overall Canopy Width |
- |
- |
24.81 ft |
| Outside Body Width |
- |
- |
22 ft |
| Inside Body Width |
- |
- |
19.72 ft |
| Front Canopy Height |
- |
- |
19.8 ft |
| Rear Axle - Clearance |
- |
- |
3.25 ft |
| Centerline of Rear Dual Tire Width |
- |
- |
14.06 ft |
| Overall Tire Width |
- |
- |
20.59 ft |
