CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    775G Off-Highway Truck
    View Product
    798 AC Electric Drive Mining Truck
    View Product Remove
    796 AC Electric Drive Mining Truck
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 75118 lb - -
    LRC Bare Chassis Weight with Hoist 76326 lb - -
    LRC Gross Vehicle Weight (Target) without Hoist 246503 lb - -
    LRC Gross Vehicle Weight (Target) with Hoist 246503 lb - -
    HRC Bare Chassis Weight without Hoist 76573 lb - -
    HRC Bare Chassis Weight with Hoist 77781 lb - -
    HRC Gross Vehicle Weight (Target) without Hoist 246503 lb - -
    HRC Gross Vehicle Weight (Target) with Hoist 246503 lb - -
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - -

    ROPS
    Tractor ROPS 85288 lb - -

    Operating Specifications
    Nominal Water Tank Capacity 15000 gal (US) - -

    Steering
    Steering Standards ISO 5010:2007 Steering Standards: ISO 5010:2007 Steering Standards: ISO 5010:2007
    Steer Angle 31 ° 39 ° 39 °
    Turning Diameter 77.1 ft - -
    Turning Circle - Clearance Diameter 85.6 ft - -
    Turning Diameter - Front - 106.3 ft 106.3 ft
    Note - Turning Diameter (ISO 7457:1997) Turning Diameter (ISO 7457:1997)

    Engine
    Engine Model Cat® C27 Cat® C175-16 Cat® C175-16
    Gross Power - SAE J1995 825 HP 3500 HP 3500 HP
    Rated Net Power - SAE J1349 683 HP - -
    Bore 5.4 in 6.9 in 6.9 in
    Stroke 6 in 8.7 in 8.7 in
    Displacement 1648 in³ 5187 in³ 5187 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. - -
    Net Power - SAE J1349 - 3405 HP 3405 HP
    Optional Gross Power - SAE J1995 - 3100 HP -
    Rated Speed - 1800 r/min -
    Emissions Rating - Fuel Optimized Fuel Optimized
    Note (1) - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) - Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp

    Transmission
    Forward - 1 6.6 mile/h - -
    Forward - 2 9.3 mile/h - -
    Forward - 3 12.6 mile/h - -
    Forward - 4 16.8 mile/h - -
    Forward - 5 22.8 mile/h - -
    Forward - 6 30.7 mile/h - -
    Forward - 7 41.6 mile/h - -
    Reverse 8.7 mile/h - -
    Note Maximum travel speeds with standard 24.00R35 (E4) tires - -

    Brakes
    Brake Surface - Front 257 in² - -
    Brake Surface - Rear 9497 in² - -

    Service Refill Capacities
    Fuel Tank Capacity 210 gal (US) - -
    Cooling System 45 gal (US) 211 gal (US) 211 gal (US)
    Crankcase 24 gal (US) 82 gal (US) 82 gal (US)
    Differential - Final Drives 38 gal (US) - -
    Steering System - Including Tank 14 gal (US) - -
    Brake/Hoist Hydraulic Tank 46.5 gal (US) - -
    Brake Hoist System 85 gal (US) - -
    Fuel Tank - 1300 gal (US) 1300 gal (US)
    Fuel Tank (Tier 4) - 1200 gal (US) 1200 gal (US)
    Diesel Exhaust Fluid Tank - 100 gal (US) 100 gal (US)
    Final Drive - Each - 67 gal (US) 67 gal (US)
    Hydraulic System - Including Tank - 385 gal (US) 385 gal (US)
    Hydraulic Tank - 296 gal (US) 296 gal (US)
    Grease Tank - 90 lb 90 lb
    Note (1) - DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
    Front Wheels - Each - - 7 gal (US)

    Weights - Approximate
    Nominal Rated Payload - 410 ton (US) 360 ton (US)
    Rated Gross Machine Weight - 1375000 lb 1270000 lb
    Chassis Weight - 453826 lb 448415 lb
    Body Weight Range - 38 833 - 43 275 kg (85,611 - 95,406 lb) 38 833 – 42 907 kg (85,611 – 94,594 lb)
    Note (1) - Consult your tire manufacturer for maximum tire load. Consult your tire manufacturer for maximum tire load.
    Note (2) - Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) - Body weight varies depending on how body is equipped. Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations

    Service Refill Capacities - High Altitude Only
    Fuel Tank - 2000 gal (US) -
    Cooling System - 273 gal (US) -
    Crankcase - 124 gal (US) -
    Hydraulic Tank - 273 gal (US) -
    Hydraulic System (includes tank) - 342 gal (US) -

    AC Drive System
    Total Reduction Ratio - 35:01:00 35:01:00
    Top Speed - Loaded - 40 mile/h 40 mile/h
    Generator/Alternator - Brushless, engine mounted, dual bearing Cat brushless, engine mounted, dual bearing
    Controls - IGBT Inverter Technology, air cooled, pressurized cabinet with filtration Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
    Wheel Motor - Cat high-torque AC induction, rear axle mounted Cat AC induction, rear axle mounted
    Cooling System - Cat variable speed, hydraulically driven cooling system Cat variable speed, hydraulically driven cooling system

    Braking System
    Service Brakes - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area - 22642 in² 20378 in²
    Rear - Wet Disc Brake Surface Area - 32730 in² 30750 in²
    Standards - Service and Secondary: ISO 3450:2011 Service and Secondary: ISO 3450:2011
    Electric Retarding - Radial Grid Design -
    Dynamic Retarding Power - Continuous - 5480 HP 5480 HP
    Parking Brakes - Four-corner, Multi-disc, Spring Applied, Hydraulically Released -
    Load Brake - Rear service brakes Rear service brakes
    Note - Anti-Lock Brake System (ABS) optional with CMD package Anti-Lock Brake System (ABS) optional with CMD package
    Parking Brake - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released

    Weight Distributions - Approximate
    Front Axle - Empty - 47 % 47 %
    Rear Axle - Empty - 53 % 53 %
    Front Axle - Loaded - 33 % 33 %
    Rear Axle - Loaded - 67 % 67 %
    Note - Weight distributions optimized with Cat body. Weight distributions optimized with Cat body.

    Capacity - HE Body - 100% fill factor
    Struck - 129-200 m³ (168-261 yd³) 97-153 m³ (127-200 yd³)
    Heaped (SAE 2:1) - 218-276 m³ (285-361 yd³) 186-237 m³ (243-310 yd³)
    Note - Contact your local Cat dealer for body recommendations. Consult your local Cat dealer for body recommendations.

    Body Hoists
    Type - Twin, two-stage hydraulic cylinders with snubbing valve. Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle - 257.3 gal/min 257.3 gal/min
    Relief Valve Setting - Raise - 3029 psi 3029 psi
    Body Raise Time - High Idle - 21 s 21 s
    Body Lower Time - Float - 22 s 22 s
    Body Power Down- High Idle - 17.5 s 17.5 s
    Note (1) - Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
    Note (2) - Power raise in both stages; power down capability in both stages. Power raise in both stages; power down capability in both stages.
    Note (3) - Automatic body-lower modulation reduces impact on frame. Automatic body-lower modulation reduces impact on frame.

    Suspension
    Type - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front - 10 in 4 in
    Effective Cylinder Stroke - Rear - 5 in 2 in
    Rear axle - Oscillation - - +/- 5.32 degrees

    Cab
    Air Conditioning - HFC - 134A refrigerant: 21,600 Btu/h HFC - 134A refrigerant: 21,600 Btu/h
    Heater / Defroster - 24600 Btu/h 24600 Btu/h
    Note - Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
    ROPS Standards (1) - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    FOPS Standards - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Engine - High Altitude Only
    Engine Model - Cat® C175-20 -
    Gross Power SAE J1995:2014 - 4150 HP -
    Net Power - SAE J1349:2011 - 4000 HP -
    Rated Speed - 1750 r/min -
    Emissions Rating - Fuel Optimized -
    Bore - 6.9 in -
    Stroke - 8.7 in -
    Displacement - 6469 in³ -
    Note 1 - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. -
    Note 2 - Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp -

    Tires
    Rims - 44" x 63" Rims 44" x 63"
    Standard Tires - 59/80 R63 59/80 R63
    Note (1) - Quick Change Rims optional. Quick Change Rims optional.
    Note (2) - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

    Dimensions (Approximate)
    Height - Top of ROPS - 22.1 ft 22.05 ft
    Overall Length - 51.44 ft 51.44 ft
    Wheel Base - 21.9 ft 21.9 ft
    Rear Axle - Tail - 16.07 ft 16.07 ft
    Dump Clearance - Empty - 5.72 ft 5.72 ft
    Loading Height - Empty - 25.54 ft 23.85 ft
    Overall Height - Body Raised - 48.85 ft 48.85 ft
    Centerline Front Tire Width - 23.06 ft 23.06 ft
    Front Axle Clearance - Loaded - 2.81 ft 2.81 ft
    Overall Canopy Width (with rock deflectors) - 33.15 ft 33.15 ft
    Outside Body/Canopy Width (without rock deflectors) - 31.62 ft 31.62 ft
    Inside Body Width - 29.44 ft 29.44 ft
    Front Canopy Height - Empty - 26.01 ft 26.01 ft
    Rear Axle Clearance - Loaded - 2.8 ft 2.8 ft
    Centerline of Rear Dual Tire Width - 19.5 ft 19.5 ft
    Overall Tire Width - Empty - 30.27 ft 30.27 ft
    Overall Length (High Altitude only) - 51.87 ft -
    Note - Dimensions listed includes canopy deflectors Dimensions listed includes canopy deflectors

    Sound
    Sound Standards - The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 797F Mining Truck Add
    • 794 AC Mining Truck Add
    • 793F Mining Truck Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add
    • 789 Next Generation Add