Compare Equipment Go Back
 775G Off-Highway Truck |
 772 (07) Off-Highway Truck |
|
|
Weights |
|||
|---|---|---|---|
| LRC Bare Chassis Weight without Hoist | 75118 lb | - | - |
| LRC Bare Chassis Weight with Hoist | 76326 lb | - | - |
| LRC Gross Vehicle Weight (Target) without Hoist | 246503 lb | - | - |
| LRC Gross Vehicle Weight (Target) with Hoist | 246503 lb | - | - |
| HRC Bare Chassis Weight without Hoist | 76573 lb | - | - |
| HRC Bare Chassis Weight with Hoist | 77781 lb | - | - |
| HRC Gross Vehicle Weight (Target) without Hoist | 246503 lb | - | - |
| HRC Gross Vehicle Weight (Target) with Hoist | 246503 lb | - | - |
| Note | LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - | - |
ROPS |
|||
| Tractor ROPS | 85288 lb | - | - |
| FOPS Standards | - | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. | - |
| ROPS Standards | - | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. | - |
Operating Specifications |
|||
| Nominal Water Tank Capacity | 15000 gal (US) | - | - |
| Nominal Payload Class (100%) | - | 51.6 ton (US) | - |
| Top Speed - Loaded | - | 49.2 mile/h | - |
| Maximum Payload Class (110%) | - | 56.7 ton (US) | - |
| Body Capacity - SAE 2:1 | - | 40.8 yd³ | - |
| Target Payload Capacity | - | 51.6 ton (US) | - |
| Not to Exceed Payload (120%) | - | 61.9 ton (US) | - |
| Body Capacity (SAE 2:1)** | - | 40.8 yd³ | - |
Steering |
|||
| Steering Standards | ISO 5010:2007 | ISO 5010:2007 | - |
| Steer Angle | 31 ° | 40.5 ° | - |
| Turning Diameter | 77.1 ft | - | - |
| Turning Circle - Clearance Diameter | 85.6 ft | 66.6 ft | - |
| Turning Diameter - Front | - | 57.7 ft | - |
Engine |
|||
| Engine Model | Cat® C27 | Cat® C18 | - |
| Gross Power - SAE J1995 | 825 HP | 605 HP | - |
| Rated Net Power - SAE J1349 | 683 HP | - | - |
| Bore | 5.4 in | 5.7 in | - |
| Stroke | 6 in | 7.2 in | - |
| Displacement | 1648 in³ | 1105 in³ | - |
| Note | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. | - | - |
| Rated Engine Speed | - | 1700 r/min | - |
| Net Power - SAE J1349 | - | 550 HP | - |
| Net Power - ISO 9249 | - | 550 HP | - |
| Number of Cylinders | - | 6 | - |
| Net Torque - SAE J1349 | - | 2221 ft-lb | - |
| Engine Power - ISO 14396 | - | 598 HP | - |
Transmission |
|||
| Forward - 1 | 6.6 mile/h | 8 mile/h | - |
| Forward - 2 | 9.3 mile/h | 10.9 mile/h | - |
| Forward - 3 | 12.6 mile/h | 14.8 mile/h | - |
| Forward - 4 | 16.8 mile/h | 19.8 mile/h | - |
| Forward - 5 | 22.8 mile/h | 26.9 mile/h | - |
| Forward - 6 | 30.7 mile/h | 36.2 mile/h | - |
| Forward - 7 | 41.6 mile/h | 49.2 mile/h | - |
| Reverse | 8.7 mile/h | 10.4 mile/h | - |
| Note | Maximum travel speeds with standard 24.00R35 (E4) tires | - | - |
Brakes |
|||
| Brake Surface - Front | 257 in² | 216 in² | - |
| Brake Surface - Rear | 9497 in² | 7794 in² | - |
| Brake Standards | - | ISO 3450:1996 | - |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 210 gal (US) | - | - |
| Cooling System | 45 gal (US) | 33 gal (US) | - |
| Crankcase | 24 gal (US) | 17 gal (US) | - |
| Differential - Final Drives | 38 gal (US) | 47 gal (US) | - |
| Steering System - Including Tank | 14 gal (US) | 23 gal (US) | - |
| Brake/Hoist Hydraulic Tank | 46.5 gal (US) | 38 gal (US) | - |
| Brake Hoist System | 85 gal (US) | 60 gal (US) | - |
| Fuel Tank | - | 140 gal (US) | - |
| Steering Tank | - | 14.5 gal (US) | - |
| Torque Converter - Transmission System | - | 17 gal (US) | - |
| DEF Tank | - | 6 gal (US) | - |
Weights - Approximate |
|||
| Target Gross Machine Operating Weight | - | 181000 lb | - |
| Chassis Weight | - | 59223 lb | - |
| Body Weight | - | 17306 lb | - |
| Target Gross Machine Weight | - | 181000 lb | - |
Weight Distributions - Approximate |
|||
| Front Axle - Empty | - | 51.4 % | - |
| Front Axle - Loaded | - | 34.2 % | - |
| Rear Axle - Empty | - | 48.6 % | - |
| Rear Axle - Loaded | - | 65.8 % | - |
Final Drives |
|||
| Differential Ratio | - | 2.74:1 | - |
| Planetary Ratio | - | 4.80:1 | - |
| Total Reduction Ratio | - | 13.14:1 | - |
Body Hoists |
|||
| Pump Flow - High Idle | - | 112 gal/min | - |
| Relief Valve Setting - Raise | - | 2750 psi | - |
| Relief Valve Setting - Lower | - | 500 psi | - |
| Body Raise Time - High Idle | - | 8 s | - |
| Body Lower Time - Float | - | 10 s | - |
| Body Power Down - High Idle | - | 10 s | - |
Suspension |
|||
| Rear axle - Oscillation | - | 8.9 ° | - |
| Empty Loaded Cylinder Stroke Front | - | 9.2 in | - |
| Empty Loaded Cylinder Stroke Rear | - | 5.8 in | - |
Capacity - Dual Slope - 100% Fill Factor |
|||
| Heaped 2:1 (SAE) | - | 40.8 yd³ | - |
| Struck | - | 31.3 yd³ | - |
Capacity - Flat Floor - 100% Fill Factor |
|||
| Struck | - | 31.3 yd³ | - |
| Heaped 2:1 (SAE) | - | 40.9 yd³ | - |
Sound |
|||
| Sound Standards (3) | - | Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. | - |
| Sound Standards (2) | - | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A). | - |
| Sound Standards (1) | - | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. | - |
Dimensions |
|||
| Height - Top of ROPS | - | 12.8 ft | - |
| Inside Body Depth - Maximum | - | 5.7 ft | - |
| Overall Body Length | - | 26.8 ft | - |
| Inside Body Length | - | 19 ft | - |
| Overall Length | - | 28.9 ft | - |
| Wheel Base | - | 13 ft | - |
| Rear Axle - Tail | - | 9.5 ft | - |
| Ground Clearance | - | 1.6 ft | - |
| Dump Clearance | - | 1.5 ft | - |
| Loading Height - Empty | - | 11.6 ft | - |
| Overall Height - Body Raised | - | 27.1 ft | - |
| Operating Width | - | 15.7 ft | - |
| Centerline Front Tire Width | - | 10.4 ft | - |
| Engine Guard Clearance | - | 2 ft | - |
| Outside Body Width | - | 12.9 ft | - |
| Inside Body Width | - | 11.9 ft | - |
| Front Canopy Height | - | 13.7 ft | - |
| Rear Axle - Clearance | - | 1.9 ft | - |
| Centerline of Rear Dual Tire Width | - | 8.7 ft | - |
| Overall Tire Width | - | 12.9 ft | - |
Tires |
|||
| Standard Tire | - | 21.00R33 (E4) | - |
Add a Similar Product:
-
775 Off-Highway Truck Add
-
772G Off-Highway Truck Add
-
770 Off-Highway Truck Add
-
797F Mining Truck Add
-
796 AC Electric Drive Mining Truck Add
-
798 AC Electric Drive Mining Truck Add
-
794 AC Mining Truck Add
-
793F Mining Truck Add
-
785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add
-
789 Next Generation Add