CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    775G Off-Highway Truck
    View Product
    770 Off-Highway Truck
    View Product Remove
    796 AC Electric Drive Mining Truck
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 75118 lb - -
    LRC Bare Chassis Weight with Hoist 76326 lb - -
    LRC Gross Vehicle Weight (Target) without Hoist 246503 lb - -
    LRC Gross Vehicle Weight (Target) with Hoist 246503 lb - -
    HRC Bare Chassis Weight without Hoist 76573 lb - -
    HRC Bare Chassis Weight with Hoist 77781 lb - -
    HRC Gross Vehicle Weight (Target) without Hoist 246503 lb - -
    HRC Gross Vehicle Weight (Target) with Hoist 246503 lb - -
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - -

    ROPS
    Tractor ROPS 85288 lb - -
    ROPS Standards - Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. -
    FOPS Standards - Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. -

    Operating Specifications
    Nominal Water Tank Capacity 15000 gal (US) - -
    Nominal Payload Class (100%) - 42.1 ton (US) -
    Top Speed - Loaded - 45.8 mile/h -
    Target Payload (100%) - 42.1 ton (US) -
    Maximum Working Payload (110%) - 46.3 ton (US) -
    Maximum Allowable Payload (120%)* - 50.5 ton (US) -
    Body Capacity - SAE 2:1 - 32.9 yd³ -
    Note (1) - *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. -
    Note (2) - Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight. -

    Steering
    Steering Standards ISO 5010:2007 ISO 5010:2007 Steering Standards: ISO 5010:2007
    Steer Angle 31 ° 40.5 ° 39 °
    Turning Diameter 77.1 ft - -
    Turning Circle - Clearance Diameter 85.6 ft 66.6 ft -
    Turning Diameter - Front - 57.7 ft 106.3 ft
    Note - Target gross machine operating weight is 71 214 kg (157,000 lb). Turning Diameter (ISO 7457:1997)

    Engine
    Engine Model Cat® C27 Cat® C15 Cat® C175-16
    Gross Power - SAE J1995 825 HP 515 HP 3500 HP
    Rated Net Power - SAE J1349 683 HP - -
    Bore 5.4 in 5.4 in 6.9 in
    Stroke 6 in 6.7 in 8.7 in
    Displacement 1648 in³ 927.6 in³ 5187 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. - -
    Rated Engine Speed - 1700 r/min -
    Net Power - SAE J1349 - 477 HP 3405 HP
    Net Power - ISO 9249 - 477 HP -
    Net Power - 80/1269/EEC - 489 HP -
    Net Power - ISO 14396 - 508 HP -
    Net Torque - SAE J1349 - 1834 ft·lbf -
    Number of Cylinders - 6 -
    Note (1) - Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) - Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) - No engine derating required up to 3000 m (9,843 ft) altitude. Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
    Note (4) - Meets Japan Small Volume Exemption. -
    Emissions - Meets U.S. EPA Tier 4 and EU Stage V emission standards. -
    Emissions Rating - - Fuel Optimized

    Transmission
    Forward - 1 6.6 mile/h 7.4 mile/h -
    Forward - 2 9.3 mile/h 10.1 mile/h -
    Forward - 3 12.6 mile/h 13.8 mile/h -
    Forward - 4 16.8 mile/h 18.5 mile/h -
    Forward - 5 22.8 mile/h 25.1 mile/h -
    Forward - 6 30.7 mile/h 33.8 mile/h -
    Forward - 7 41.6 mile/h 45.8 mile/h -
    Reverse 8.7 mile/h 8.8 mile/h -
    Note Maximum travel speeds with standard 24.00R35 (E4) tires Maximum travel speeds with standard 18.00R33 (E4) tires. -

    Brakes
    Brake Surface - Front 257 in² 216 in² -
    Brake Surface - Rear 9497 in² 6235 in² -
    Brake Standards - ISO 3450:2011 -
    Note - Target gross machine operating weight is 71 214 kg (157,000 lb). -

    Service Refill Capacities
    Fuel Tank Capacity 210 gal (US) - -
    Cooling System 45 gal (US) 33 gal (US) 211 gal (US)
    Crankcase 24 gal (US) 17 gal (US) 82 gal (US)
    Differential - Final Drives 38 gal (US) 47 gal (US) -
    Steering System - Including Tank 14 gal (US) 23 gal (US) -
    Brake/Hoist Hydraulic Tank 46.5 gal (US) 38 gal (US) -
    Brake Hoist System 85 gal (US) 60 gal (US) -
    Fuel Tank - 140 gal (US) 1300 gal (US)
    Steering Tank - 14.5 gal (US) -
    Torque Converter - Transmission System - 17 gal (US) -
    DEF Tank - 6 gal (US) -
    Fuel Tank (Tier 4) - - 1200 gal (US)
    Diesel Exhaust Fluid Tank - - 100 gal (US)
    Front Wheels - Each - - 7 gal (US)
    Final Drive - Each - - 67 gal (US)
    Hydraulic Tank - - 296 gal (US)
    Hydraulic System - Including Tank - - 385 gal (US)
    Grease Tank - - 90 lb
    Note (1) - - DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option

    Weights - Approximate
    Target Gross Machine Operating Weight - 157000 lb -
    Target Gross Machine Weight - 157000 lb -
    Chassis Weight - 55948 lb 448415 lb
    Body Weight - 17306 lb -
    Note (1) - Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. Consult your tire manufacturer for maximum tire load.
    Note (2) - Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Nominal Rated Payload - - 360 ton (US)
    Rated Gross Machine Weight - - 1270000 lb
    Body Weight Range - - 38 833 – 42 907 kg (85,611 – 94,594 lb)
    Note (3) - - Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations

    Final Drives
    Differential Ratio - 1.92:1 -
    Planetary Ratio - 4.80:1 -
    Total Reduction Ratio - 9.26:1 -

    Body Hoists
    Pump Flow - High Idle - 118 gal/min 257.3 gal/min
    Relief Valve Setting - Raise - 2750 psi 3029 psi
    Relief Valve Setting - Lower - 500 psi -
    Body Raise Time - High Idle - 7.5 s 21 s
    Body Lower Time - Float - 10 s 22 s
    Body Power Down - High Idle - 10 s -
    Type - - Twin, two-stage hydraulic cylinders with snubbing valve.
    Body Power Down- High Idle - - 17.5 s
    Note (1) - - Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
    Note (2) - - Power raise in both stages; power down capability in both stages.
    Note (3) - - Automatic body-lower modulation reduces impact on frame.

    Capacity - Dual Slope - 100% Fill Factor
    Struck - 23.01 yd³ -
    Heaped (SAE 2:1)* - 32.9 yd³ -
    Note (2) - *ISO 6483:1980. -
    Note (1) - Contact your local Cat dealer for body recommendation. -

    Capacity - Flat Floor - 100% Fill Factor
    Struck - 23.01 yd³ -
    Heaped (SAE 2:1)* - 32.9 yd³ -
    Note (1) - Contact your local Cat dealer for body recommendation. -
    Note (2) - *ISO 6483:1980. -

    Weight Distributions - Approximate
    Front Axle - Empty - 49 % 47 %
    Front Axle - Loaded - 34 % 33 %
    Rear Axle - Empty - 51 % 53 %
    Rear Axle - Loaded - 66 % 67 %
    Note - - Weight distributions optimized with Cat body.

    Suspension
    Empty Loaded Cylinder Stroke Front - 9.2 in -
    Empty Loaded Cylinder Stroke Rear - 5.9 in -
    Rear axle - Oscillation - 8.9 ° +/- 5.32 degrees
    Type - - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front - - 4 in
    Effective Cylinder Stroke - Rear - - 2 in

    Tires
    Standard Tire - 18.00R33 (E4) -
    Note (1) - Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. Quick Change Rims optional.
    Note (2) - Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Standard Tires - - 59/80 R63
    Rims - - 44" x 63"

    Sound
    Sound Standards (1) - Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. -
    Sound Standards (2) - Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). -
    Sound Standards (3) - Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. -
    Sound Standards - - The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.

    Dimensions
    Height - Top of ROPS - 12.7 ft -
    Overall Body Length - 26.8 ft -
    Inside Body Length - 18.5 ft -
    Overall Length - 28.9 in -
    Wheel Base - 13 ft -
    Rear Axle - Tail - 8.5 ft -
    Ground Clearance - 1.6 in -
    Dump Clearance - 1.7 ft -
    Loading Height - Empty - 10.3 ft -
    Inside Body Depth - Maximum - 4.6 ft -
    Overall Height - Body Raised - 27.1 ft -
    Operating Width - 15.7 ft -
    Centerline Front Tire Width - 10.2 ft -
    Engine Guard Clearance - 1.8 ft -
    Outside Body Width - 12.9 ft -
    Inside Body Width - 11.9 ft -
    Front Canopy Height - 13.5 ft -
    Rear Axle - Clearance - 1.8 ft -
    Centerline of Rear Dual Tire Width - 8.3 ft -
    Overall Tire Width - 12.1 ft -

    AC Drive System
    Total Reduction Ratio - - 35:01:00
    Top Speed - Loaded - - 40 mile/h
    Generator/Alternator - - Cat brushless, engine mounted, dual bearing
    Controls - - Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
    Wheel Motor - - Cat AC induction, rear axle mounted
    Cooling System - - Cat variable speed, hydraulically driven cooling system

    Braking System
    Service Brakes - - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area - - 20378 in²
    Rear - Wet Disc Brake Surface Area - - 30750 in²
    Standards - - Service and Secondary: ISO 3450:2011
    Parking Brake - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released
    Load Brake - - Rear service brakes
    Dynamic Retarding Power - Continuous - - 5480 HP
    Note - - Anti-Lock Brake System (ABS) optional with CMD package

    Capacity - HE Body - 100% fill factor
    Struck - - 97-153 m³ (127-200 yd³)
    Heaped (SAE 2:1) - - 186-237 m³ (243-310 yd³)
    Note - - Consult your local Cat dealer for body recommendations.

    Cab
    Air Conditioning - - HFC - 134A refrigerant: 21,600 Btu/h
    Heater / Defroster - - 24600 Btu/h
    Note - - Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
    ROPS Standards (1) - - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    FOPS Standards - - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Dimensions (Approximate)
    Height - Top of ROPS - - 22.05 ft
    Overall Length - - 51.44 ft
    Wheel Base - - 21.9 ft
    Rear Axle - Tail - - 16.07 ft
    Dump Clearance - Empty - - 5.72 ft
    Loading Height - Empty - - 23.85 ft
    Overall Height - Body Raised - - 48.85 ft
    Centerline Front Tire Width - - 23.06 ft
    Front Axle Clearance - Loaded - - 2.81 ft
    Overall Canopy Width (with rock deflectors) - - 33.15 ft
    Outside Body/Canopy Width (without rock deflectors) - - 31.62 ft
    Inside Body Width - - 29.44 ft
    Front Canopy Height - Empty - - 26.01 ft
    Rear Axle Clearance - Loaded - - 2.8 ft
    Centerline of Rear Dual Tire Width - - 19.5 ft
    Overall Tire Width - Empty - - 30.27 ft
    Note - - Dimensions listed includes canopy deflectors
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 772 (07) Off-Highway Truck Add
    • 797F Mining Truck Add
    • 794 AC Mining Truck Add
    • 793F Mining Truck Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add
    • 789 Next Generation Add