Compare Equipment Go Back
775G Off-Highway Truck |
770 Off-Highway Truck |
|
|
Weights |
|||
---|---|---|---|
LRC Bare Chassis Weight without Hoist | 75118 lb | - | - |
LRC Bare Chassis Weight with Hoist | 76326 lb | - | - |
LRC Gross Vehicle Weight (Target) without Hoist | 246503 lb | - | - |
LRC Gross Vehicle Weight (Target) with Hoist | 246503 lb | - | - |
HRC Bare Chassis Weight without Hoist | 76573 lb | - | - |
HRC Bare Chassis Weight with Hoist | 77781 lb | - | - |
HRC Gross Vehicle Weight (Target) without Hoist | 246503 lb | - | - |
HRC Gross Vehicle Weight (Target) with Hoist | 246503 lb | - | - |
Note | LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - | - |
ROPS |
|||
Tractor ROPS | 85288 lb | - | - |
ROPS Standards | - | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. | - |
FOPS Standards | - | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. | - |
Operating Specifications |
|||
Nominal Water Tank Capacity | 15000 gal (US) | - | - |
Nominal Payload Class (100%) | - | 42.1 ton (US) | - |
Top Speed - Loaded | - | 45.8 mile/h | - |
Target Payload (100%) | - | 42.1 ton (US) | - |
Maximum Working Payload (110%) | - | 46.3 ton (US) | - |
Maximum Allowable Payload (120%)* | - | 50.5 ton (US) | - |
Body Capacity - SAE 2:1 | - | 32.9 yd³ | - |
Note (1) | - | *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. | - |
Note (2) | - | Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight. | - |
Steering |
|||
Steering Standards | ISO 5010:2007 | ISO 5010:2007 | - |
Steer Angle | 31 ° | 40.5 ° | - |
Turning Diameter | 77.1 ft | - | - |
Turning Circle - Clearance Diameter | 85.6 ft | 66.6 ft | - |
Turning Diameter - Front | - | 57.7 ft | - |
Note | - | Target gross machine operating weight is 71 214 kg (157,000 lb). | - |
Engine |
|||
Engine Model | Cat® C27 | Cat® C15 | - |
Gross Power - SAE J1995 | 825 HP | 515 HP | - |
Rated Net Power - SAE J1349 | 683 HP | - | - |
Bore | 5.4 in | 5.4 in | - |
Stroke | 6 in | 6.7 in | - |
Displacement | 1648 in³ | 927.6 in³ | - |
Note | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. | - | - |
Rated Engine Speed | - | 1700 r/min | - |
Net Power - SAE J1349 | - | 477 HP | - |
Net Power - ISO 9249 | - | 477 HP | - |
Net Power - 80/1269/EEC | - | 489 HP | - |
Net Power - ISO 14396 | - | 508 HP | - |
Net Torque - SAE J1349 | - | 1834 ft·lbf | - |
Number of Cylinders | - | 6 | - |
Note (1) | - | Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard. | - |
Note (2) | - | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). | - |
Note (3) | - | No engine derating required up to 3000 m (9,843 ft) altitude. | - |
Note (4) | - | Meets Japan Small Volume Exemption. | - |
Emissions | - | Meets U.S. EPA Tier 4 and EU Stage V emission standards. | - |
Transmission |
|||
Forward - 1 | 6.6 mile/h | 7.4 mile/h | - |
Forward - 2 | 9.3 mile/h | 10.1 mile/h | - |
Forward - 3 | 12.6 mile/h | 13.8 mile/h | - |
Forward - 4 | 16.8 mile/h | 18.5 mile/h | - |
Forward - 5 | 22.8 mile/h | 25.1 mile/h | - |
Forward - 6 | 30.7 mile/h | 33.8 mile/h | - |
Forward - 7 | 41.6 mile/h | 45.8 mile/h | - |
Reverse | 8.7 mile/h | 8.8 mile/h | - |
Note | Maximum travel speeds with standard 24.00R35 (E4) tires | Maximum travel speeds with standard 18.00R33 (E4) tires. | - |
Brakes |
|||
Brake Surface - Front | 257 in² | 216 in² | - |
Brake Surface - Rear | 9497 in² | 6235 in² | - |
Brake Standards | - | ISO 3450:2011 | - |
Note | - | Target gross machine operating weight is 71 214 kg (157,000 lb). | - |
Service Refill Capacities |
|||
Fuel Tank Capacity | 210 gal (US) | - | - |
Cooling System | 45 gal (US) | 33 gal (US) | - |
Crankcase | 24 gal (US) | 17 gal (US) | - |
Differential - Final Drives | 38 gal (US) | 47 gal (US) | - |
Steering System - Including Tank | 14 gal (US) | 23 gal (US) | - |
Brake/Hoist Hydraulic Tank | 46.5 gal (US) | 38 gal (US) | - |
Brake Hoist System | 85 gal (US) | 60 gal (US) | - |
Fuel Tank | - | 140 gal (US) | - |
Steering Tank | - | 14.5 gal (US) | - |
Torque Converter - Transmission System | - | 17 gal (US) | - |
DEF Tank | - | 6 gal (US) | - |
Weights - Approximate |
|||
Target Gross Machine Operating Weight | - | 157000 lb | - |
Target Gross Machine Weight | - | 157000 lb | - |
Chassis Weight | - | 55948 lb | - |
Body Weight | - | 17306 lb | - |
Note (1) | - | Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. | - |
Note (2) | - | Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. | - |
Final Drives |
|||
Differential Ratio | - | 1.92:1 | - |
Planetary Ratio | - | 4.80:1 | - |
Total Reduction Ratio | - | 9.26:1 | - |
Body Hoists |
|||
Pump Flow - High Idle | - | 118 gal/min | - |
Relief Valve Setting - Raise | - | 2750 psi | - |
Relief Valve Setting - Lower | - | 500 psi | - |
Body Raise Time - High Idle | - | 7.5 s | - |
Body Lower Time - Float | - | 10 s | - |
Body Power Down - High Idle | - | 10 s | - |
Capacity - Dual Slope - 100% Fill Factor |
|||
Struck | - | 23.01 yd³ | - |
Heaped (SAE 2:1)* | - | 32.9 yd³ | - |
Note (2) | - | *ISO 6483:1980. | - |
Note (1) | - | Contact your local Cat dealer for body recommendation. | - |
Capacity - Flat Floor - 100% Fill Factor |
|||
Struck | - | 23.01 yd³ | - |
Heaped (SAE 2:1)* | - | 32.9 yd³ | - |
Note (1) | - | Contact your local Cat dealer for body recommendation. | - |
Note (2) | - | *ISO 6483:1980. | - |
Weight Distributions - Approximate |
|||
Front Axle - Empty | - | 49 % | - |
Front Axle - Loaded | - | 34 % | - |
Rear Axle - Empty | - | 51 % | - |
Rear Axle - Loaded | - | 66 % | - |
Suspension |
|||
Empty Loaded Cylinder Stroke Front | - | 9.2 in | - |
Empty Loaded Cylinder Stroke Rear | - | 5.9 in | - |
Rear axle - Oscillation | - | 8.9 ° | - |
Tires |
|||
Standard Tire | - | 18.00R33 (E4) | - |
Note (1) | - | Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. | - |
Note (2) | - | Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. | - |
Sound |
|||
Sound Standards (1) | - | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. | - |
Sound Standards (2) | - | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). | - |
Sound Standards (3) | - | Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. | - |
Dimensions |
|||
Height - Top of ROPS | - | 12.7 ft | - |
Overall Body Length | - | 26.8 ft | - |
Inside Body Length | - | 18.5 ft | - |
Overall Length | - | 28.9 ft | - |
Wheel Base | - | 13 ft | - |
Rear Axle - Tail | - | 8.5 ft | - |
Ground Clearance | - | 1.6 ft | - |
Dump Clearance | - | 1.7 ft | - |
Loading Height - Empty | - | 10.3 ft | - |
Inside Body Depth - Maximum | - | 4.6 ft | - |
Overall Height - Body Raised | - | 27.1 ft | - |
Operating Width | - | 15.7 ft | - |
Centerline Front Tire Width | - | 10.2 ft | - |
Engine Guard Clearance | - | 1.8 ft | - |
Outside Body Width | - | 12.9 ft | - |
Inside Body Width | - | 11.9 ft | - |
Front Canopy Height | - | 13.5 ft | - |
Rear Axle - Clearance | - | 1.8 ft | - |
Centerline of Rear Dual Tire Width | - | 8.3 ft | - |
Overall Tire Width | - | 12.1 ft | - |
Add a Similar Product:
- 772G Off-Highway Truck Add
- 775 Off-Highway Truck Add
- 772 (07) Off-Highway Truck Add
- 797F Mining Truck Add
- 796 AC Electric Drive Mining Truck Add
- 798 AC Electric Drive Mining Truck Add
- 794 AC Mining Truck Add
- 793F Mining Truck Add
- 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add
- 789 Next Generation Add