Compare

Compare Equipment Go Back

Weights
	775G Off-Highway Truck View Product	775 Off-Highway Truck View Product Remove	796 AC Electric Drive Mining Truck View Product Remove	789 Next Generation View Product Remove	793F Mining Truck View Product Remove
LRC Bare Chassis Weight without Hoist	75118 lb	-	-	-	-
LRC Bare Chassis Weight with Hoist	76326 lb	-	-	-	-
LRC Gross Vehicle Weight (Target) without Hoist	246503 lb	-	-	-	-
LRC Gross Vehicle Weight (Target) with Hoist	246503 lb	-	-	-	-
HRC Bare Chassis Weight without Hoist	76573 lb	-	-	-	-
HRC Bare Chassis Weight with Hoist	77781 lb	-	-	-	-
HRC Gross Vehicle Weight (Target) without Hoist	246503 lb	-	-	-	-
HRC Gross Vehicle Weight (Target) with Hoist	246503 lb	-	-	-	-
Note	LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.	-	-	-	-
ROPS
Tractor ROPS	85288 lb	-	-	-	-
FOPS Standards	-	Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.	-	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria.
ROPS Standards	-	Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.	-	-	ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria.
Operating Specifications
Nominal Water Tank Capacity	15000 gal (US)	-	-	-	-
Nominal Payload Class (100%)	-	70.5 ton (US)	-	-	-
Top Speed - Loaded	-	41.6 mile/h	-	-	-
Maximum Working Payload (110%)	-	77.5 ton (US)	-	-	-
Target Payload (100%)	-	70.5 ton (US)	-	-	-
Maximum Allowable Payload (120%)*	-	84.6 ton (US)	-	-	-
Note (2)	-	* Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.	-	-	-
Note (1)	-	Capacity with Dual Slope body – no liner.	-	-	-
Body Capacity - SAE 2:1	-	55.23 yd³	-	-	-
Steering
Steering Standards	ISO 5010:2007	ISO 5010:2007	Steering Standards: ISO 5010:2007	ISO 5010:2007	SAE J15111 OCT90, ISO 5010:1992
Steer Angle	31 °	31 °	39 °	36.07 °	36 °
Turning Diameter	77.1 ft	-	-	-	-
Turning Circle - Clearance Diameter	85.6 ft	85.6 ft	-	-	-
Turning Diameter - Front	-	77.1 ft	106.3 ft	-	93.2 ft
Note	-	-	Turning Diameter (ISO 7457:1997)	-	-
Engine
Engine Model	Cat® C27	Cat® C27	Cat® C175-16	Cat® 3516E	Cat® C175-16
Gross Power - SAE J1995	825 HP	825 HP	3500 HP	-	2650 HP
Rated Net Power - SAE J1349	683 HP	-	-	-	-
Bore	5.4 in	5.4 in	6.9 in	6.7 in	6.9 in
Stroke	6 in	6 in	8.7 in	8.5 in	8.7 in
Displacement	1648 in³	1648 in³	5187 in³	4766 in³	5187 in³
Note	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model.	-	-	-	-
Rated Engine Speed	-	1800 r/min	-	-	-
Net Power - SAE J1349	-	768 HP	3405 HP	-	2478 HP
Net Power - 80/1269/EEC	-	775 HP	-	-	-
Net Power - ISO 9249	-	775 HP	-	-	-
Engine Power - ISO 14396	-	812 HP	-	-	-
Note (2)	-	Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).	U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.	Optional 1417 kW / 1,900 HP engine rating.	EPA Tier 4 Final / EU Stage V available for applicable markets.
Net Torque	-	3148 ft-lb	-	-	-
Peak Torque - Speed	-	1200 r/min	-	-	-
Note (1)	-	Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard.	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (3)	-	No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent.	Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp	U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets.	-
Emissions	-	Meets EU Stage V emission standards.	-	-	Fuel Optimized
Rated Speed	-	-	1800 r/min	1650 r/min	1750 r/min
Emissions Rating	-	-	Fuel Optimized	Fuel Optimized	-
Gross Power - SAE J1995:2014	-	-	-	2100 HP	-
Net Power - SAE J1349:2011	-	-	-	1975 HP	-
Transmission
Forward - 1	6.6 mile/h	6.6 mile/h	-	7.8 mile/h	8 mile/h
Forward - 2	9.3 mile/h	9.3 mile/h	-	10.6 mile/h	10.8 mile/h
Forward - 3	12.6 mile/h	12.6 mile/h	-	14.4 mile/h	14.8 mile/h
Forward - 4	16.8 mile/h	16.8 mile/h	-	19.4 mile/h	19.9 mile/h
Forward - 5	22.8 mile/h	22.8 mile/h	-	26.3 mile/h	27.1 mile/h
Forward - 6	30.7 mile/h	30.7 mile/h	-	35.5 mile/h	37.3 mile/h
Forward - 7	41.6 mile/h	41.6 mile/h	-	-	-
Reverse	8.7 mile/h	8.7 mile/h	-	7.3 mile/h	7.3 mile/h
Note	Maximum travel speeds with standard 24.00R35 (E4) tires	Maximum travel speeds with standard 24.00R35 (E4) tires.	-	-	-
Top Speed - Loaded	-	-	-	35.5 mile/h	37.3 mile/h
Brakes
Brake Surface - Front	257 in²	257 in²	-	-	13921 in²
Brake Surface - Rear	9497 in²	9497 in²	-	-	20847 in²
Brake Standards	-	ISO 3450:2011	-	-	-
Standards	-	-	-	-	J-ISO 3450 JAN88, ISO 3450:1996
Service Refill Capacities
Fuel Tank Capacity	210 gal (US)	-	-	-	-
Cooling System	45 gal (US)	45 gal (US)	211 gal (US)	180 gal (US)	284 gal (US)
Crankcase	24 gal (US)	24 gal (US)	82 gal (US)	77 gal (US)	82 gal (US)
Differential - Final Drives	38 gal (US)	38 gal (US)	-	-	-
Steering System - Including Tank	14 gal (US)	14 gal (US)	-	-	77 gal (US)
Brake/Hoist Hydraulic Tank	46.5 gal (US)	46.5 gal (US)	-	-	-
Brake Hoist System	85 gal (US)	85 gal (US)	-	169 gal (US)	-
Fuel Tank	-	210 gal (US)	1300 gal (US)	1000 gal (US)	750 gal (US)
Steering Tank	-	9.5 gal (US)	-	-	-
Torque Converter - Transmission System - LRC	-	16 gal (US)	-	-	-
Torque Converter - Transmission System - HRC	-	18 gal (US)	-	-	-
Fuel Tank (Tier 4)	-	-	1200 gal (US)	55 gal (US)	-
Diesel Exhaust Fluid Tank	-	-	100 gal (US)	62 gal (US)	62 gal (US)
Front Wheels - Each	-	-	7 gal (US)	5.8 gal (US)	-
Final Drive - Each	-	-	67 gal (US)	-	-
Hydraulic Tank	-	-	296 gal (US)	-	-
Hydraulic System - Including Tank	-	-	385 gal (US)	-	-
Grease Tank	-	-	90 lb	-	-
Note (1)	-	-	DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option	-	DEF Tank only available for EPA Tier 4 engine option.
Fuel Tank - Standard	-	-	-	550 gal (US)	-
Differentials	-	-	-	161 gal (US)	-
Steering System	-	-	-	42 gal (US)	-
Steering System - Includes Tank	-	-	-	46 gal (US)	-
Brake Hoist System - Includes Tank	-	-	-	347 gal (US)	347 gal (US)
Torque Converter - Transmission System - Including Sump	-	-	-	55 gal (US)	-
Fuel Tank - Optional	-	-	-	-	1300 gal (US)
Rear Axle - Housing	-	-	-	-	260 gal (US)
Torque Converter - Transmission Sump	-	-	-	-	27 gal (US)
Torque Converter/Transmission System - Including Sump	-	-	-	-	55 gal (US)
Capacity - Dual Slope - 100% Fill Factor
Struck	-	42.7 yd³	-	-	-
Heaped (SAE 2:1)*	-	55.5 yd³	-	-	-
Note (1)	-	Contact your local Cat dealer for body recommendation.	-	-	-
Note (2)	-	*ISO 6483:1980	-	-	-
Capacity - Flat Floor - 100% Fill Factor
Struck	-	42.2 yd³	-	-	-
Heaped (SAE 2:1)*	-	55.2 yd³	-	-	-
Note (1)	-	Contact your local Cat dealer for body recommendation.	-	-	-
Note (2)	-	*ISO 6483:1980	-	-	-
Weight Distributions - Approximate
Front Axle - Empty	-	50 %	47 %	50%	48 %
Front Axle - Loaded	-	34 %	33 %	33%	33 %
Rear Axle - Empty	-	50 %	53 %	50%	52 %
Rear Axle - Loaded	-	66 %	67 %	67%	67 %
Note	-	-	Weight distributions optimized with Cat body.	-	-
Final Drives
Differential Ratio	-	3.64:1	-	2.35:1	1.8:1
Planetary Ratio	-	4.80:1	-	10.83:1	16:01
Total Reduction Ratio	-	17.49:1	-	25.46:1	26.8:1
Type	-	-	-	Double reduction, planetary with full floating axles	-
Body Hoists
Pump Flow - High Idle	-	118 gal/min	257.3 gal/min	106.5 gal/min	224 gal/min
Relief Valve Setting - Raise	-	2502 psi	3029 psi	2749 psi	2955 psi
Relief Valve Setting - Lower	-	500 psi	-	-	-
Body Raise Time - High Idle	-	10 s	21 s	14 s	19 s
Body Lower Time - Float	-	14 s	22 s	16 s	20 s
Body Power Down - High Idle	-	14 s	-	-	17.5 s
Type	-	-	Twin, two-stage hydraulic cylinders with snubbing valve.	Twin, two-stage hydraulic cylinders with snubbing valve.	Twin, two-stage hydraulic cylinders with snubbing valve
Body Power Down- High Idle	-	-	17.5 s	-	-
Note (1)	-	-	Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.	-	-
Note (2)	-	-	Power raise in both stages; power down capability in both stages.	-	-
Note (3)	-	-	Automatic body-lower modulation reduces impact on frame.	-	-
Weights - Approximate
Maximum Gross Vehicle Weight	-	246503 lb	-	-	-
Nominal Rated Payload	-	-	360 ton (US)	213 ton (US)	256 ton (US)
Rated Gross Machine Weight	-	-	1270000 lb	715000 lb	851000 lb
Chassis Weight	-	-	448415 lb	-	265639 lb
Body Weight Range	-	-	38 833 – 42 907 kg (85,611 – 94,594 lb)	-	-
Note (1)	-	-	Consult your tire manufacturer for maximum tire load.	Consult your tire manufacturer for maximum tire load	Consult your tire manufacturer for maximum tire load
Note (2)	-	-	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.	Chassis weight with full fuel and fluids, standard and mandatory attachments, hoist, body mounting group, rims, and tires.	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (3)	-	-	Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations	-	Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.
Body Weight	-	-	-	60406 lb	67682 lb
Suspension
Empty Loaded Cylinder Stroke Front	-	9.2 in	-	-	-
Rear axle - Oscillation	-	8.1°	+/- 5.32 degrees	+/- 5 degrees	±4.9 degrees
Empty Loaded Cylinder Stroke Rear	-	5.8 in	-	-	-
Type	-	-	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Effective Cylinder Stroke - Front	-	-	4 in	4.12 in	5.1 in
Effective Cylinder Stroke - Rear	-	-	2 in	3.67 in	4.2 in
Tires
Note (2)	-	Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Note (1)	-	Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.	Quick Change Rims optional.	Quick Change Rims optional	Extended life wheel stations optional.
Standard Tire	-	24.00R35 (E4)	-	-	-
Standard Tires	-	-	59/80 R63	37 R57	40.00 R57
Rims	-	-	44" x 63"	29” x 57” Rims	29" or 32"
Optional Tires	-	-	-	40 R57	-
Optional Tire	-	-	-	42/90 R57	-
Note	-	-	-	-	Quick Change Rims optional.
Sound
Sound Standards (1)	-	The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t	-	-	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Standards (2)	-	The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A).	-	-	-
Sound Standards (3)	-	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.	-	-	-
Sound Standards	-	-	The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.	-	The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.
Sustainability
Recyclability	-	98%	-	-	-
AC Drive System
Total Reduction Ratio	-	-	35:01:00	-	-
Top Speed - Loaded	-	-	40 mile/h	-	-
Generator/Alternator	-	-	Cat brushless, engine mounted, dual bearing	-	-
Controls	-	-	Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration	-	-
Wheel Motor	-	-	Cat AC induction, rear axle mounted	-	-
Cooling System	-	-	Cat variable speed, hydraulically driven cooling system	-	-
Braking System
Service Brakes	-	-	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area	-	-	20378 in²	12662 in²	13921 in³
Rear - Wet Disc Brake Surface Area	-	-	30750 in²	20861 in²	20847 in³
Standards	-	-	Service and Secondary: ISO 3450:2011	(Service and Secondary) ISO 3450:2011	(Service and Secondary): ISO 3450:1996
Parking Brake	-	-	Four-corner, Multi-disc, Spring Applied, Hydraulically Released	Four-corner, Multi-disc, Spring applied, Hydraulically Released	-
Load Brake	-	-	Rear service brakes	-	Rear service brakes
Dynamic Retarding Power - Continuous	-	-	5480 HP	-	-
Note	-	-	Anti-Lock Brake System (ABS) optional with CMD package	-	Anti-Lock Brake System (ABS) optional with CMD package
Parking Brakes	-	-	-	-	Four-corner, Multi-disc, Spring Applied, Hydraulically Released
Capacity - HE Body - 100% fill factor
Struck	-	-	97-153 m³ (127-200 yd³)	-	-
Heaped (SAE 2:1)	-	-	186-237 m³ (243-310 yd³)	-	-
Note	-	-	Consult your local Cat dealer for body recommendations.	-	-
Cab
Air Conditioning	-	-	HFC - 134A refrigerant: 21,600 Btu/h	(HFC - 134A refrigerant) 24,500 Btu/hr	Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr
Heater / Defroster	-	-	24600 Btu/h	33300 Btu/h	38900 Btu/h
Note	-	-	Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.	-	Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.
ROPS Standards (1)	-	-	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.	The operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008.	The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396.
FOPS Standards	-	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.	FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria.
ROPS Standards (2)	-	-	-	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.	ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria.
Dimensions (Approximate)
Height - Top of ROPS	-	-	22.05 ft	5550 mm	-
Overall Length	-	-	51.44 ft	12970 mm	-
Wheel Base	-	-	21.9 ft	57000 mm	-
Rear Axle - Tail	-	-	16.07 ft	3856 mm	-
Dump Clearance - Empty	-	-	5.72 ft	-	-
Loading Height - Empty	-	-	23.85 ft	6147 mm	-
Overall Height - Body Raised	-	-	48.85 ft	11534 mm	-
Centerline Front Tire Width	-	-	23.06 ft	5410 mm	-
Front Axle Clearance - Loaded	-	-	2.81 ft	-	-
Overall Canopy Width (with rock deflectors)	-	-	33.15 ft	-	-
Outside Body/Canopy Width (without rock deflectors)	-	-	31.62 ft	-	-
Inside Body Width	-	-	29.44 ft	6920 mm	-
Front Canopy Height - Empty	-	-	26.01 ft	-	-
Rear Axle Clearance - Loaded	-	-	2.8 ft	-	-
Centerline of Rear Dual Tire Width	-	-	19.5 ft	4695 mm	-
Overall Tire Width - Empty	-	-	30.27 ft	-	-
Note	-	-	Dimensions listed includes canopy deflectors	-	-
Overall Body Length	-	-	-	12945 mm	-
Inside Body Length	-	-	-	8730 mm	-
Ground Clearance	-	-	-	1304 mm	-
Dump Clearance	-	-	-	1585 mm	-
Rear Sidewall Height	-	-	-	1010 mm	-
Inside Body Depth - Maximum	-	-	-	3075 mm	-
Operating Width	-	-	-	7822 mm	-
Engine Guard Clearance	-	-	-	1290 mm	-
Overall Canopy Width	-	-	-	7769 mm	-
Outside Body Width	-	-	-	7123 mm	-
Front Canopy Height	-	-	-	6739 mm	-
Rear Axle - Clearance	-	-	-	1263 mm	-
Overall Tire Width	-	-	-	7120 mm	-
Capacity - HP Body - 100% Fill Factor
Struck	-	-	-	77 m3(101 yd3)	112.6-151 m³ (147-197.5 yd³)
Heaped (SAE 2:1)*	-	-	-	143 m3(187 yd2)	162-191 m³ (212-250 yd³)
Note (1)	-	-	-	Consult your local Cat dealer for body recommendations	Contact your local Cat dealer for body recommendation.
Note (2)	-	-	-	-	*ISO 6483:1980
Capacity - MSD II - 100% Fill Factor
Struck	-	-	-	-	112-142 m³ (146-186 yd³)
Heaped (SAE 2:1)	-	-	-	-	159-190 m3 (209-250 yd3)
Note	-	-	-	-	Contact your local Cat dealer for body recommendation.

Compare Equipment Go Back

775G Off-Highway Truck

775 Off-Highway Truck

796 AC Electric Drive Mining Truck

789 Next Generation

793F Mining Truck

Weights

ROPS

Operating Specifications

Steering

Engine

Transmission

Brakes

Service Refill Capacities

Capacity - Dual Slope - 100% Fill Factor

Capacity - Flat Floor - 100% Fill Factor

Weight Distributions - Approximate

Final Drives

Body Hoists

Weights - Approximate

Suspension

Tires

Sound

Sustainability

AC Drive System

Braking System

Capacity - HE Body - 100% fill factor

Cab

Dimensions (Approximate)

Capacity - HP Body - 100% Fill Factor

Capacity - MSD II - 100% Fill Factor

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us