|
|
|
|
796 AC Electric Drive Mining Truck
|
Weights |
LRC Bare Chassis Weight without Hoist |
75118 lb |
- |
- |
- |
LRC Bare Chassis Weight with Hoist |
76326 lb |
- |
- |
- |
LRC Gross Vehicle Weight (Target) without Hoist |
246503 lb |
- |
- |
- |
LRC Gross Vehicle Weight (Target) with Hoist |
246503 lb |
- |
- |
- |
HRC Bare Chassis Weight without Hoist |
76573 lb |
- |
- |
- |
HRC Bare Chassis Weight with Hoist |
77781 lb |
- |
- |
- |
HRC Gross Vehicle Weight (Target) without Hoist |
246503 lb |
- |
- |
- |
HRC Gross Vehicle Weight (Target) with Hoist |
246503 lb |
- |
- |
- |
Note |
LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. |
- |
- |
- |
ROPS |
Tractor ROPS |
85288 lb |
- |
- |
- |
ROPS Standards |
- |
- |
ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria. |
- |
FOPS Standards |
- |
- |
FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria. |
- |
Operating Specifications |
Nominal Water Tank Capacity |
15000 gal (US) |
- |
- |
- |
Steering |
Steering Standards |
ISO 5010:2007 |
ISO 5010:2007 |
SAE J15111 OCT90, ISO 5010:1992 |
Steering Standards: ISO 5010:2007 |
Steer Angle |
31 ° |
- |
36 ° |
39 ° |
Turning Diameter |
77.1 ft |
- |
- |
- |
Turning Circle - Clearance Diameter |
85.6 ft |
- |
- |
- |
Steering Angle |
- |
40 ° |
- |
- |
Turning Diameter - Front |
- |
122.7 ft |
93.2 ft |
106.3 ft |
Note |
- |
Turning Diameter (ISO 7457:2009) |
- |
Turning Diameter (ISO 7457:1997) |
Engine |
Engine Model |
Cat® C27 |
Cat® C175-20 |
Cat® C175-16 |
Cat® C175-16 |
Gross Power - SAE J1995 |
825 HP |
4000 HP |
2650 HP |
3500 HP |
Rated Net Power - SAE J1349 |
683 HP |
- |
- |
- |
Bore |
5.4 in |
6.9 in |
6.9 in |
6.9 in |
Stroke |
6 in |
8.7 in |
8.7 in |
8.7 in |
Displacement |
1648 in³ |
6469 in³ |
5187 in³ |
5187 in³ |
Note |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. |
- |
- |
- |
Net Power - SAE J1349 |
- |
3795 HP |
2478 HP |
3405 HP |
Rated Speed |
- |
1750 r/min |
1750 r/min |
1800 r/min |
Emissions |
- |
U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. |
Fuel Optimized |
- |
Note (1) |
- |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
Note (2) |
- |
U.S. EPA Tier 4 Final available for applicable markets. |
EPA Tier 4 Final / EU Stage V available for applicable markets. |
U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. |
Note (3) |
- |
High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. |
- |
Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp |
Emissions Rating |
- |
- |
- |
Fuel Optimized |
Transmission |
Forward - 1 |
6.6 mile/h |
6.6 mile/h |
8 mile/h |
- |
Forward - 2 |
9.3 mile/h |
8.9 mile/h |
10.8 mile/h |
- |
Forward - 3 |
12.6 mile/h |
12 mile/h |
14.8 mile/h |
- |
Forward - 4 |
16.8 mile/h |
16.2 mile/h |
19.9 mile/h |
- |
Forward - 5 |
22.8 mile/h |
21.8 mile/h |
27.1 mile/h |
- |
Forward - 6 |
30.7 mile/h |
29.4 mile/h |
37.3 mile/h |
- |
Forward - 7 |
41.6 mile/h |
39.5 mile/h |
- |
- |
Reverse |
8.7 mile/h |
7.4 mile/h |
7.3 mile/h |
- |
Note |
Maximum travel speeds with standard 24.00R35 (E4) tires |
- |
- |
- |
Top Speed - Loaded |
- |
39.5 mile/h |
37.3 mile/h |
- |
Brakes |
Brake Surface - Front |
257 in² |
- |
13921 in² |
- |
Brake Surface - Rear |
9497 in² |
- |
20847 in² |
- |
Standards |
- |
- |
J-ISO 3450 JAN88, ISO 3450:1996 |
- |
Service Refill Capacities |
Fuel Tank Capacity |
210 gal (US) |
- |
- |
- |
Cooling System |
45 gal (US) |
306 gal (US) |
284 gal (US) |
211 gal (US) |
Crankcase |
24 gal (US) |
103 gal (US) |
82 gal (US) |
82 gal (US) |
Differential - Final Drives |
38 gal (US) |
- |
- |
- |
Steering System - Including Tank |
14 gal (US) |
95 gal (US) |
77 gal (US) |
- |
Brake/Hoist Hydraulic Tank |
46.5 gal (US) |
- |
- |
- |
Brake Hoist System |
85 gal (US) |
- |
- |
- |
Fuel Tank |
- |
1000 gal (US) |
750 gal (US) |
1300 gal (US) |
Fuel Tank (Tier 4) |
- |
1200 gal (US) |
- |
1200 gal (US) |
Diesel Exhaust Fluid Tank |
- |
100 gal (US) |
62 gal (US) |
100 gal (US) |
Front Wheels - Each |
- |
16 gal (US) |
- |
7 gal (US) |
Differentials |
- |
330 gal (US) |
- |
- |
Steering Tank |
- |
67 gal (US) |
- |
- |
Brake/Hoist Tank |
- |
203 gal (US) |
- |
- |
Brake Hoist System - Includes Tank |
- |
489 gal (US) |
347 gal (US) |
- |
Torque Converter Sump |
- |
80 gal (US) |
- |
- |
Torque Converter/Transmission System - Including Sump |
- |
166 gal (US) |
55 gal (US) |
- |
Note (1) |
- |
DEF Tank only available for EPA Tier 4 engine option. |
DEF Tank only available for EPA Tier 4 engine option. |
DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option |
Fuel Tank - Optional |
- |
- |
1300 gal (US) |
- |
Rear Axle - Housing |
- |
- |
260 gal (US) |
- |
Torque Converter - Transmission Sump |
- |
- |
27 gal (US) |
- |
Final Drive - Each |
- |
- |
- |
67 gal (US) |
Hydraulic Tank |
- |
- |
- |
296 gal (US) |
Hydraulic System - Including Tank |
- |
- |
- |
385 gal (US) |
Grease Tank |
- |
- |
- |
90 lb |
Weights - Approximate |
Nominal Rated Payload |
- |
400 ton (US) |
256 ton (US) |
360 ton (US) |
Rated Gross Machine Weight |
- |
1375000 lb |
851000 lb |
1270000 lb |
Chassis Weight |
- |
474472 lb |
265639 lb |
448415 lb |
Body Weight |
- |
94799 lb |
67682 lb |
- |
Note (1) |
- |
Consult your tire manufacturer for maximum tire load |
Consult your tire manufacturer for maximum tire load |
Consult your tire manufacturer for maximum tire load. |
Note (2) |
- |
Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. |
Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. |
Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. |
Note (4) |
- |
Tier 4 Chassis Weight: 486263 lb (220565 kg) |
- |
- |
Note (3) |
- |
- |
Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations. |
Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations |
Body Weight Range |
- |
- |
- |
38 833 – 42 907 kg (85,611 – 94,594 lb) |
Body Hoists |
Type |
- |
Twin, two-stage hydraulic cylinders with snubbing valve. |
Twin, two-stage hydraulic cylinders with snubbing valve |
Twin, two-stage hydraulic cylinders with snubbing valve. |
Pump Flow - High Idle |
- |
317 gal/min |
224 gal/min |
257.3 gal/min |
Relief Valve Setting - Raise |
- |
3510 psi |
2955 psi |
3029 psi |
Body Raise Time - High Idle |
- |
25 s |
19 s |
21 s |
Body Lower Time - Float |
- |
18 s |
20 s |
22 s |
Body Power Down- High Idle |
- |
18 s |
- |
17.5 s |
Body Power Down - High Idle |
- |
- |
17.5 s |
- |
Note (1) |
- |
- |
- |
Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. |
Note (2) |
- |
- |
- |
Power raise in both stages; power down capability in both stages. |
Note (3) |
- |
- |
- |
Automatic body-lower modulation reduces impact on frame. |
Suspension |
Type |
- |
Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments |
Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments |
Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments |
Effective Cylinder Stroke - Front |
- |
3.9 in |
5.1 in |
4 in |
Effective Cylinder Stroke - Rear |
- |
3.7 in |
4.2 in |
2 in |
Rear axle - Oscillation |
- |
±3.96 degrees |
±4.9 degrees |
+/- 5.32 degrees |
Weight Distributions - Approximate |
Front Axle - Empty |
- |
47.20% |
48 % |
47 % |
Rear Axle - Empty |
- |
52.80% |
52 % |
53 % |
Front Axle - Loaded |
- |
33.30% |
33 % |
33 % |
Rear Axle - Loaded |
- |
66.70% |
67 % |
67 % |
Note |
- |
Weight distributions optimized with Cat body. |
- |
Weight distributions optimized with Cat body. |
Final Drives |
Type |
- |
Double reduction, planetary with full floating axles. |
- |
- |
Differential Ratio |
- |
1.276:1 |
1.8:1 |
- |
Planetary Ratio |
- |
16.67:1 |
16:01 |
- |
Total Reduction Ratio |
- |
21.26:1 |
26.8:1 |
- |
Note |
- |
Double reduction, planetary with full floating axles. |
- |
- |
Tires |
Tires |
- |
59/80 R63 |
- |
- |
Rims |
- |
44" x 63" |
29" or 32" |
44" x 63" |
Note |
- |
Quick Change Rims optional. |
Quick Change Rims optional. |
- |
Note (1) |
- |
Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
Extended life wheel stations optional. |
Quick Change Rims optional. |
Standard Tires |
- |
- |
40.00 R57 |
59/80 R63 |
Note (2) |
- |
- |
Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
Braking System |
Service Brakes |
- |
Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
Front Wet Disc Brake Surface Area |
- |
20500 in² |
13921 in³ |
20378 in² |
Rear - Wet Disc Brake Surface Area |
- |
30750 in² |
20847 in³ |
30750 in² |
Standards |
- |
Service and Secondary: ISO 3450:2011 |
(Service and Secondary): ISO 3450:1996 |
Service and Secondary: ISO 3450:2011 |
Parking Brake |
- |
Four-corner, Multi-disc, Spring Applied, Hydraulically Released |
- |
Four-corner, Multi-disc, Spring Applied, Hydraulically Released |
Load Brake |
- |
Rear service brakes |
Rear service brakes |
Rear service brakes |
Note |
- |
Anti-Lock Brake System (ABS) optional with CMD package |
Anti-Lock Brake System (ABS) optional with CMD package |
Anti-Lock Brake System (ABS) optional with CMD package |
Parking Brakes |
- |
- |
Four-corner, Multi-disc, Spring Applied, Hydraulically Released |
- |
Dynamic Retarding Power - Continuous |
- |
- |
- |
5480 HP |
Capacity - HP Body - 100% Fill Factor |
Struck |
- |
225 yd³ / 172 m³ |
112.6-151 m³ (147-197.5 yd³) |
- |
Heaped (SAE 2:1)* |
- |
330 yd³ / 252 m³ |
162-191 m³ (212-250 yd³) |
- |
Note (1) |
- |
Consult your local Cat dealer for body recommendations. |
Contact your local Cat dealer for body recommendation. |
- |
Note (2) |
- |
- |
*ISO 6483:1980 |
- |
Cab |
Air Conditioning |
- |
HFC - 134A refrigerant: 24,300 Btu/h |
Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr |
HFC - 134A refrigerant: 21,600 Btu/h |
Heater / Defroster |
- |
38900 Btu/h |
38900 Btu/h |
24600 Btu/h |
Note |
- |
Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. |
Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. |
Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. |
ROPS Standards (1) |
- |
The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. |
The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396. |
ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. |
ROPS Standards (2) |
- |
ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. |
ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. |
- |
FOPS Standards |
- |
FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. |
FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. |
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. |
Dimensions |
Rear Axle - Clearance - Loaded |
- |
3.08 ft |
- |
- |
Inside Body Depth - Maximum |
- |
11 ft |
- |
- |
Overall Height - Body Raised |
- |
51.5 ft |
- |
- |
Loaded Ground Clearance |
- |
2.58 ft |
- |
- |
Loading Height - Empty |
- |
23 ft |
- |
- |
Engine Guard Clearance - Loaded |
- |
3.33 ft |
- |
- |
Height - Top of ROPS - Empty |
- |
21.4 ft |
- |
- |
Front Canopy Height - Empty |
- |
25.33 ft |
- |
- |
Overall Body Length |
- |
48.6 ft |
- |
- |
Inside Body Length |
- |
32.75 ft |
- |
- |
Overall Length |
- |
49.5 ft |
- |
- |
Wheel Base |
- |
23.58 ft |
- |
- |
Rear Axle - Tail |
- |
12.9 ft |
- |
- |
Dump Clearance |
- |
6.58 ft |
- |
- |
Centerline Front Tire Width |
- |
21.41 ft |
- |
- |
Overall Canopy Width |
- |
29.91 ft |
- |
- |
Outside Body Width |
- |
32 ft |
- |
- |
Inside Body Width |
- |
27.91 ft |
- |
- |
Centerline of Rear Dual Tire Width |
- |
20.41 ft |
- |
- |
Overall Tire Width |
- |
31.25 ft |
- |
- |
Capacity - MSD II - 100% Fill Factor |
Struck |
- |
- |
112-142 m³ (146-186 yd³) |
- |
Heaped (SAE 2:1) |
- |
- |
159-190 m3 (209-250 yd3) |
- |
Note |
- |
- |
Contact your local Cat dealer for body recommendation. |
- |
Sound |
Sound Standards |
- |
- |
The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. |
The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. |
Sound Standards (1) |
- |
- |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
- |
AC Drive System |
Total Reduction Ratio |
- |
- |
- |
35:01:00 |
Top Speed - Loaded |
- |
- |
- |
40 mile/h |
Generator/Alternator |
- |
- |
- |
Cat brushless, engine mounted, dual bearing |
Controls |
- |
- |
- |
Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration |
Wheel Motor |
- |
- |
- |
Cat AC induction, rear axle mounted |
Cooling System |
- |
- |
- |
Cat variable speed, hydraulically driven cooling system |
Capacity - HE Body - 100% fill factor |
Struck |
- |
- |
- |
97-153 m³ (127-200 yd³) |
Heaped (SAE 2:1) |
- |
- |
- |
186-237 m³ (243-310 yd³) |
Note |
- |
- |
- |
Consult your local Cat dealer for body recommendations. |
Dimensions (Approximate) |
Height - Top of ROPS |
- |
- |
- |
22.05 ft |
Overall Length |
- |
- |
- |
51.44 ft |
Wheel Base |
- |
- |
- |
21.9 ft |
Rear Axle - Tail |
- |
- |
- |
16.07 ft |
Dump Clearance - Empty |
- |
- |
- |
5.72 ft |
Loading Height - Empty |
- |
- |
- |
23.85 ft |
Overall Height - Body Raised |
- |
- |
- |
48.85 ft |
Centerline Front Tire Width |
- |
- |
- |
23.06 ft |
Front Axle Clearance - Loaded |
- |
- |
- |
2.81 ft |
Overall Canopy Width (with rock deflectors) |
- |
- |
- |
33.15 ft |
Outside Body/Canopy Width (without rock deflectors) |
- |
- |
- |
31.62 ft |
Inside Body Width |
- |
- |
- |
29.44 ft |
Front Canopy Height - Empty |
- |
- |
- |
26.01 ft |
Rear Axle Clearance - Loaded |
- |
- |
- |
2.8 ft |
Centerline of Rear Dual Tire Width |
- |
- |
- |
19.5 ft |
Overall Tire Width - Empty |
- |
- |
- |
30.27 ft |
Note |
- |
- |
- |
Dimensions listed includes canopy deflectors |