CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    775G Off-Highway Truck
    View Product
    797F Mining Truck
    View Product Remove
    796 AC Electric Drive Mining Truck
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 75118 lb - -
    LRC Bare Chassis Weight with Hoist 76326 lb - -
    LRC Gross Vehicle Weight (Target) without Hoist 246503 lb - -
    LRC Gross Vehicle Weight (Target) with Hoist 246503 lb - -
    HRC Bare Chassis Weight without Hoist 76573 lb - -
    HRC Bare Chassis Weight with Hoist 77781 lb - -
    HRC Gross Vehicle Weight (Target) without Hoist 246503 lb - -
    HRC Gross Vehicle Weight (Target) with Hoist 246503 lb - -
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - -

    ROPS
    Tractor ROPS 85288 lb - -

    Operating Specifications
    Nominal Water Tank Capacity 15000 gal (US) - -

    Steering
    Steering Standards ISO 5010:2007 ISO 5010:2007 Steering Standards: ISO 5010:2007
    Steer Angle 31 ° - 39 °
    Turning Diameter 77.1 ft - -
    Turning Circle - Clearance Diameter 85.6 ft - -
    Steering Angle - 40 ° -
    Turning Diameter - Front - 122.7 ft 106.3 ft
    Note - Turning Diameter (ISO 7457:2009) Turning Diameter (ISO 7457:1997)

    Engine
    Engine Model Cat® C27 Cat® C175-20 Cat® C175-16
    Gross Power - SAE J1995 825 HP 4000 HP 3500 HP
    Rated Net Power - SAE J1349 683 HP - -
    Bore 5.4 in 6.9 in 6.9 in
    Stroke 6 in 8.7 in 8.7 in
    Displacement 1648 in³ 6469 in³ 5187 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. - -
    Net Power - SAE J1349 - 3795 HP 3405 HP
    Rated Speed - 1750 r/min 1800 r/min
    Emissions - U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. -
    Note (1) - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) - U.S. EPA Tier 4 Final available for applicable markets. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) - High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
    Emissions Rating - - Fuel Optimized

    Transmission
    Forward - 1 6.6 mile/h 6.6 mile/h -
    Forward - 2 9.3 mile/h 8.9 mile/h -
    Forward - 3 12.6 mile/h 12 mile/h -
    Forward - 4 16.8 mile/h 16.2 mile/h -
    Forward - 5 22.8 mile/h 21.8 mile/h -
    Forward - 6 30.7 mile/h 29.4 mile/h -
    Forward - 7 41.6 mile/h 39.5 mile/h -
    Reverse 8.7 mile/h 7.4 mile/h -
    Note Maximum travel speeds with standard 24.00R35 (E4) tires - -
    Top Speed - Loaded - 39.5 mile/h -

    Brakes
    Brake Surface - Front 257 in² - -
    Brake Surface - Rear 9497 in² - -

    Service Refill Capacities
    Fuel Tank Capacity 210 gal (US) - -
    Cooling System 45 gal (US) 306 gal (US) 211 gal (US)
    Crankcase 24 gal (US) 103 gal (US) 82 gal (US)
    Differential - Final Drives 38 gal (US) - -
    Steering System - Including Tank 14 gal (US) 95 gal (US) -
    Brake/Hoist Hydraulic Tank 46.5 gal (US) - -
    Brake Hoist System 85 gal (US) - -
    Fuel Tank - 1000 gal (US) 1300 gal (US)
    Fuel Tank (Tier 4) - 1200 gal (US) 1200 gal (US)
    Diesel Exhaust Fluid Tank - 100 gal (US) 100 gal (US)
    Front Wheels - Each - 16 gal (US) 7 gal (US)
    Differentials - 330 gal (US) -
    Steering Tank - 67 gal (US) -
    Brake/Hoist Tank - 203 gal (US) -
    Brake Hoist System - Includes Tank - 489 gal (US) -
    Torque Converter Sump - 80 gal (US) -
    Torque Converter/Transmission System - Including Sump - 166 gal (US) -
    Note (1) - DEF Tank only available for EPA Tier 4 engine option. DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
    Final Drive - Each - - 67 gal (US)
    Hydraulic Tank - - 296 gal (US)
    Hydraulic System - Including Tank - - 385 gal (US)
    Grease Tank - - 90 lb

    Weights - Approximate
    Nominal Rated Payload - 400 ton (US) 360 ton (US)
    Rated Gross Machine Weight - 1375000 lb 1270000 lb
    Chassis Weight - 474472 lb 448415 lb
    Body Weight - 94799 lb -
    Note (1) - Consult your tire manufacturer for maximum tire load Consult your tire manufacturer for maximum tire load.
    Note (2) - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (4) - Tier 4 Chassis Weight: 486263 lb (220565 kg) -
    Body Weight Range - - 38 833 – 42 907 kg (85,611 – 94,594 lb)
    Note (3) - - Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations

    Body Hoists
    Type - Twin, two-stage hydraulic cylinders with snubbing valve. Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle - 317 gal/min 257.3 gal/min
    Relief Valve Setting - Raise - 3510 psi 3029 psi
    Body Raise Time - High Idle - 25 s 21 s
    Body Lower Time - Float - 18 s 22 s
    Body Power Down- High Idle - 18 s 17.5 s
    Note (1) - - Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
    Note (2) - - Power raise in both stages; power down capability in both stages.
    Note (3) - - Automatic body-lower modulation reduces impact on frame.

    Suspension
    Type - Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front - 3.9 in 4 in
    Effective Cylinder Stroke - Rear - 3.7 in 2 in
    Rear axle - Oscillation - ±3.96 degrees +/- 5.32 degrees

    Weight Distributions - Approximate
    Front Axle - Empty - 47.20% 47 %
    Rear Axle - Empty - 52.80% 53 %
    Front Axle - Loaded - 33.30% 33 %
    Rear Axle - Loaded - 66.70% 67 %
    Note - Weight distributions optimized with Cat body. Weight distributions optimized with Cat body.

    Final Drives
    Type - Double reduction, planetary with full floating axles. -
    Differential Ratio - 1.276:1 -
    Planetary Ratio - 16.67:1 -
    Total Reduction Ratio - 21.26:1 -
    Note - Double reduction, planetary with full floating axles. -

    Tires
    Tires - 59/80 R63 -
    Rims - 44" x 63" 44" x 63"
    Note - Quick Change Rims optional. -
    Note (1) - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Quick Change Rims optional.
    Standard Tires - - 59/80 R63
    Note (2) - - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

    Braking System
    Service Brakes - Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area - 20500 in² 20378 in²
    Rear - Wet Disc Brake Surface Area - 30750 in² 30750 in²
    Standards - Service and Secondary: ISO 3450:2011 Service and Secondary: ISO 3450:2011
    Parking Brake - Four-corner, Multi-disc, Spring Applied, Hydraulically Released Four-corner, Multi-disc, Spring Applied, Hydraulically Released
    Load Brake - Rear service brakes Rear service brakes
    Note - Anti-Lock Brake System (ABS) optional with CMD package Anti-Lock Brake System (ABS) optional with CMD package
    Dynamic Retarding Power - Continuous - - 5480 HP

    Capacity - HP Body - 100% Fill Factor
    Struck - 225 yd³ / 172 m³ -
    Heaped (SAE 2:1)* - 330 yd³ / 252 m³ -
    Note (1) - Consult your local Cat dealer for body recommendations. -

    Cab
    Air Conditioning - HFC - 134A refrigerant: 24,300 Btu/h HFC - 134A refrigerant: 21,600 Btu/h
    Heater / Defroster - 38900 Btu/h 24600 Btu/h
    Note - Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
    ROPS Standards (1) - The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    ROPS Standards (2) - ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. -
    FOPS Standards - FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Dimensions
    Rear Axle - Clearance - Loaded - 3.08 ft -
    Inside Body Depth - Maximum - 11 ft -
    Overall Height - Body Raised - 51.5 ft -
    Loaded Ground Clearance - 2.58 ft -
    Loading Height - Empty - 23 ft -
    Engine Guard Clearance - Loaded - 3.33 ft -
    Height - Top of ROPS - Empty - 21.4 ft -
    Front Canopy Height - Empty - 25.33 ft -
    Overall Body Length - 48.6 ft -
    Inside Body Length - 32.75 ft -
    Overall Length - 49.5 ft -
    Wheel Base - 23.58 ft -
    Rear Axle - Tail - 12.9 ft -
    Dump Clearance - 6.58 ft -
    Centerline Front Tire Width - 21.41 ft -
    Overall Canopy Width - 29.91 ft -
    Outside Body Width - 32 ft -
    Inside Body Width - 27.91 ft -
    Centerline of Rear Dual Tire Width - 20.41 ft -
    Overall Tire Width - 31.25 ft -

    AC Drive System
    Total Reduction Ratio - - 35:01:00
    Top Speed - Loaded - - 40 mile/h
    Generator/Alternator - - Cat brushless, engine mounted, dual bearing
    Controls - - Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
    Wheel Motor - - Cat AC induction, rear axle mounted
    Cooling System - - Cat variable speed, hydraulically driven cooling system

    Capacity - HE Body - 100% fill factor
    Struck - - 97-153 m³ (127-200 yd³)
    Heaped (SAE 2:1) - - 186-237 m³ (243-310 yd³)
    Note - - Consult your local Cat dealer for body recommendations.

    Sound
    Sound Standards - - The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.

    Dimensions (Approximate)
    Height - Top of ROPS - - 22.05 ft
    Overall Length - - 51.44 ft
    Wheel Base - - 21.9 ft
    Rear Axle - Tail - - 16.07 ft
    Dump Clearance - Empty - - 5.72 ft
    Loading Height - Empty - - 23.85 ft
    Overall Height - Body Raised - - 48.85 ft
    Centerline Front Tire Width - - 23.06 ft
    Front Axle Clearance - Loaded - - 2.81 ft
    Overall Canopy Width (with rock deflectors) - - 33.15 ft
    Outside Body/Canopy Width (without rock deflectors) - - 31.62 ft
    Inside Body Width - - 29.44 ft
    Front Canopy Height - Empty - - 26.01 ft
    Rear Axle Clearance - Loaded - - 2.8 ft
    Centerline of Rear Dual Tire Width - - 19.5 ft
    Overall Tire Width - Empty - - 30.27 ft
    Note - - Dimensions listed includes canopy deflectors
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 794 AC Mining Truck Add
    • 789 Next Generation Add
    • 793F Mining Truck Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add