CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    798 AC Electric Drive Mining Truck
    View Product
    775G Off-Highway Truck
    View Product Remove
    796 AC Electric Drive Mining Truck
    View Product Remove

    Weights - Approximate
    Nominal Rated Payload 410 ton (US) - 360 ton (US)
    Rated Gross Machine Weight 1375000 lb - 1270000 lb
    Chassis Weight 453826 lb - 448415 lb
    Body Weight Range 38 833 - 43 275 kg (85,611 - 95,406 lb) - 38 833 – 42 907 kg (85,611 – 94,594 lb)
    Note (1) Consult your tire manufacturer for maximum tire load. - Consult your tire manufacturer for maximum tire load.
    Note (2) Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) Body weight varies depending on how body is equipped. - Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations

    Engine
    Gross Power - SAE J1995 3500 HP 825 HP 3500 HP
    Engine Model Cat® C175-16 Cat® C27 Cat® C175-16
    Net Power - SAE J1349 3405 HP - 3405 HP
    Optional Gross Power - SAE J1995 3100 HP - -
    Rated Speed 1800 r/min - 1800 r/min
    Emissions Rating Fuel Optimized - Fuel Optimized
    Bore 6.9 in 5.4 in 6.9 in
    Stroke 8.7 in 6 in 8.7 in
    Displacement 5187 in³ 1648 in³ 5187 in³
    Note (1) Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp - Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
    Rated Net Power - SAE J1349 - 683 HP -
    Note - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. -

    Service Refill Capacities - High Altitude Only
    Fuel Tank 2000 gal (US) - -
    Cooling System 273 gal (US) - -
    Crankcase 124 gal (US) - -
    Hydraulic Tank 273 gal (US) - -
    Hydraulic System (includes tank) 342 gal (US) - -

    Service Refill Capacities
    Fuel Tank 1300 gal (US) - 1300 gal (US)
    Fuel Tank (Tier 4) 1200 gal (US) - 1200 gal (US)
    Diesel Exhaust Fluid Tank 100 gal (US) - 100 gal (US)
    Cooling System 211 gal (US) 45 gal (US) 211 gal (US)
    Crankcase 82 gal (US) 24 gal (US) 82 gal (US)
    Final Drive - Each 67 gal (US) - 67 gal (US)
    Hydraulic System - Including Tank 385 gal (US) - 385 gal (US)
    Hydraulic Tank 296 gal (US) - 296 gal (US)
    Grease Tank 90 lb - 90 lb
    Note (1) DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option - DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
    Fuel Tank Capacity - 210 gal (US) -
    Differential - Final Drives - 38 gal (US) -
    Steering System - Including Tank - 14 gal (US) -
    Brake/Hoist Hydraulic Tank - 46.5 gal (US) -
    Brake Hoist System - 85 gal (US) -
    Front Wheels - Each - - 7 gal (US)

    Steering
    Steer Angle 39 ° 31 ° 39 °
    Turning Diameter - Front 106.3 ft - 106.3 ft
    Steering Standards Steering Standards: ISO 5010:2007 ISO 5010:2007 Steering Standards: ISO 5010:2007
    Note Turning Diameter (ISO 7457:1997) - Turning Diameter (ISO 7457:1997)
    Turning Diameter - 77.1 ft -
    Turning Circle - Clearance Diameter - 85.6 ft -

    AC Drive System
    Total Reduction Ratio 35:01:00 - 35:01:00
    Top Speed - Loaded 40 mile/h - 40 mile/h
    Generator/Alternator Brushless, engine mounted, dual bearing - Cat brushless, engine mounted, dual bearing
    Controls IGBT Inverter Technology, air cooled, pressurized cabinet with filtration - Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
    Wheel Motor Cat high-torque AC induction, rear axle mounted - Cat AC induction, rear axle mounted
    Cooling System Cat variable speed, hydraulically driven cooling system - Cat variable speed, hydraulically driven cooling system

    Braking System
    Service Brakes Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area 22642 in² - 20378 in²
    Rear - Wet Disc Brake Surface Area 32730 in² - 30750 in²
    Standards Service and Secondary: ISO 3450:2011 - Service and Secondary: ISO 3450:2011
    Electric Retarding Radial Grid Design - -
    Dynamic Retarding Power - Continuous 5480 HP - 5480 HP
    Parking Brakes Four-corner, Multi-disc, Spring Applied, Hydraulically Released - -
    Load Brake Rear service brakes - Rear service brakes
    Note Anti-Lock Brake System (ABS) optional with CMD package - Anti-Lock Brake System (ABS) optional with CMD package
    Parking Brake - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released

    Weight Distributions - Approximate
    Front Axle - Empty 47 % - 47 %
    Rear Axle - Empty 53 % - 53 %
    Front Axle - Loaded 33 % - 33 %
    Rear Axle - Loaded 67 % - 67 %
    Note Weight distributions optimized with Cat body. - Weight distributions optimized with Cat body.

    Capacity - HE Body - 100% fill factor
    Struck 129-200 m³ (168-261 yd³) - 97-153 m³ (127-200 yd³)
    Heaped (SAE 2:1) 218-276 m³ (285-361 yd³) - 186-237 m³ (243-310 yd³)
    Note Contact your local Cat dealer for body recommendations. - Consult your local Cat dealer for body recommendations.

    Body Hoists
    Type Twin, two-stage hydraulic cylinders with snubbing valve. - Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle 257.3 gal/min - 257.3 gal/min
    Relief Valve Setting - Raise 3029 psi - 3029 psi
    Body Raise Time - High Idle 21 s - 21 s
    Body Lower Time - Float 22 s - 22 s
    Body Power Down- High Idle 17.5 s - 17.5 s
    Note (1) Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. - Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
    Note (2) Power raise in both stages; power down capability in both stages. - Power raise in both stages; power down capability in both stages.
    Note (3) Automatic body-lower modulation reduces impact on frame. - Automatic body-lower modulation reduces impact on frame.

    Suspension
    Type Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front 10 in - 4 in
    Effective Cylinder Stroke - Rear 5 in - 2 in
    Rear axle - Oscillation - - +/- 5.32 degrees

    Cab
    Air Conditioning HFC - 134A refrigerant: 21,600 Btu/h - HFC - 134A refrigerant: 21,600 Btu/h
    Heater / Defroster 24600 Btu/h - 24600 Btu/h
    Note Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. - Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
    ROPS Standards (1) ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    FOPS Standards FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Engine - High Altitude Only
    Engine Model Cat® C175-20 - -
    Gross Power SAE J1995:2014 4150 HP - -
    Net Power - SAE J1349:2011 4000 HP - -
    Rated Speed 1750 r/min - -
    Emissions Rating Fuel Optimized - -
    Bore 6.9 in - -
    Stroke 8.7 in - -
    Displacement 6469 in³ - -
    Note 1 Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. - -
    Note 2 Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp - -

    Tires
    Rims 44" x 63" Rims - 44" x 63"
    Standard Tires 59/80 R63 - 59/80 R63
    Note (1) Quick Change Rims optional. - Quick Change Rims optional.
    Note (2) Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

    Dimensions (Approximate)
    Height - Top of ROPS 22.1 ft - 22.05 ft
    Overall Length 51.44 ft - 51.44 ft
    Wheel Base 21.9 ft - 21.9 ft
    Rear Axle - Tail 16.07 ft - 16.07 ft
    Dump Clearance - Empty 5.72 ft - 5.72 ft
    Loading Height - Empty 25.54 ft - 23.85 ft
    Overall Height - Body Raised 48.85 ft - 48.85 ft
    Centerline Front Tire Width 23.06 ft - 23.06 ft
    Front Axle Clearance - Loaded 2.81 ft - 2.81 ft
    Overall Canopy Width (with rock deflectors) 33.15 ft - 33.15 ft
    Outside Body/Canopy Width (without rock deflectors) 31.62 ft - 31.62 ft
    Inside Body Width 29.44 ft - 29.44 ft
    Front Canopy Height - Empty 26.01 ft - 26.01 ft
    Rear Axle Clearance - Loaded 2.8 ft - 2.8 ft
    Centerline of Rear Dual Tire Width 19.5 ft - 19.5 ft
    Overall Tire Width - Empty 30.27 ft - 30.27 ft
    Overall Length (High Altitude only) 51.87 ft - -
    Note Dimensions listed includes canopy deflectors - Dimensions listed includes canopy deflectors

    Sound
    Sound Standards The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. - The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.

    Weights
    LRC Bare Chassis Weight without Hoist - 75118 lb -
    LRC Bare Chassis Weight with Hoist - 76326 lb -
    LRC Gross Vehicle Weight (Target) without Hoist - 246503 lb -
    LRC Gross Vehicle Weight (Target) with Hoist - 246503 lb -
    HRC Bare Chassis Weight without Hoist - 76573 lb -
    HRC Bare Chassis Weight with Hoist - 77781 lb -
    HRC Gross Vehicle Weight (Target) without Hoist - 246503 lb -
    HRC Gross Vehicle Weight (Target) with Hoist - 246503 lb -
    Note - LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. -

    ROPS
    Tractor ROPS - 85288 lb -

    Operating Specifications
    Nominal Water Tank Capacity - 15000 gal (US) -

    Transmission
    Forward - 1 - 6.6 mile/h -
    Forward - 2 - 9.3 mile/h -
    Forward - 3 - 12.6 mile/h -
    Forward - 4 - 16.8 mile/h -
    Forward - 5 - 22.8 mile/h -
    Forward - 6 - 30.7 mile/h -
    Forward - 7 - 41.6 mile/h -
    Reverse - 8.7 mile/h -
    Note - Maximum travel speeds with standard 24.00R35 (E4) tires -

    Brakes
    Brake Surface - Front - 257 in² -
    Brake Surface - Rear - 9497 in² -
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 797F Mining Truck Add
    • 794 AC Mining Truck Add
    • 789 Next Generation Add
    • 793F Mining Truck Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add