Compare Equipment Go Back
 798 AC Electric Drive Mining Truck |
 796 AC Electric Drive Mining Truck |
|
|
Weights - Approximate |
|||
|---|---|---|---|
| Nominal Rated Payload | 410 ton (US) | 360 ton (US) | - |
| Rated Gross Machine Weight | 1375000 lb | 1270000 lb | - |
| Chassis Weight | 453826 lb | 448415 lb | - |
| Body Weight Range | 38 833 - 43 275 kg (85,611 - 95,406 lb) | 38 833 – 42 907 kg (85,611 – 94,594 lb) | - |
| Note (1) | Consult your tire manufacturer for maximum tire load. | Consult your tire manufacturer for maximum tire load. | - |
| Note (2) | Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. | - |
| Note (3) | Body weight varies depending on how body is equipped. | Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations | - |
Engine |
|||
| Gross Power - SAE J1995 | 3500 HP | 3500 HP | - |
| Engine Model | Cat® C175-16 | Cat® C175-16 | - |
| Net Power - SAE J1349 | 3405 HP | 3405 HP | - |
| Optional Gross Power - SAE J1995 | 3100 HP | - | - |
| Rated Speed | 1800 r/min | 1800 r/min | - |
| Emissions Rating | Fuel Optimized | Fuel Optimized | - |
| Bore | 6.9 in | 6.9 in | - |
| Stroke | 8.7 in | 8.7 in | - |
| Displacement | 5187 in³ | 5187 in³ | - |
| Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - |
| Note (2) | U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - |
| Note (3) | Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp | Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp | - |
Service Refill Capacities - High Altitude Only |
|||
| Fuel Tank | 2000 gal (US) | - | - |
| Cooling System | 273 gal (US) | - | - |
| Crankcase | 124 gal (US) | - | - |
| Hydraulic Tank | 273 gal (US) | - | - |
| Hydraulic System (includes tank) | 342 gal (US) | - | - |
Service Refill Capacities |
|||
| Fuel Tank | 1300 gal (US) | 1300 gal (US) | - |
| Fuel Tank (Tier 4) | 1200 gal (US) | 1200 gal (US) | - |
| Diesel Exhaust Fluid Tank | 100 gal (US) | 100 gal (US) | - |
| Cooling System | 211 gal (US) | 211 gal (US) | - |
| Crankcase | 82 gal (US) | 82 gal (US) | - |
| Final Drive - Each | 67 gal (US) | 67 gal (US) | - |
| Hydraulic System - Including Tank | 385 gal (US) | 385 gal (US) | - |
| Hydraulic Tank | 296 gal (US) | 296 gal (US) | - |
| Grease Tank | 90 lb | 90 lb | - |
| Note (1) | DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option | DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option | - |
| Front Wheels - Each | - | 7 gal (US) | - |
Steering |
|||
| Steer Angle | 39 ° | 39 ° | - |
| Turning Diameter - Front | 106.3 ft | 106.3 ft | - |
| Steering Standards | Steering Standards: ISO 5010:2007 | Steering Standards: ISO 5010:2007 | - |
| Note | Turning Diameter (ISO 7457:1997) | Turning Diameter (ISO 7457:1997) | - |
AC Drive System |
|||
| Total Reduction Ratio | 35:01:00 | 35:01:00 | - |
| Top Speed - Loaded | 40 mile/h | 40 mile/h | - |
| Generator/Alternator | Brushless, engine mounted, dual bearing | Cat brushless, engine mounted, dual bearing | - |
| Controls | IGBT Inverter Technology, air cooled, pressurized cabinet with filtration | Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration | - |
| Wheel Motor | Cat high-torque AC induction, rear axle mounted | Cat AC induction, rear axle mounted | - |
| Cooling System | Cat variable speed, hydraulically driven cooling system | Cat variable speed, hydraulically driven cooling system | - |
Braking System |
|||
| Service Brakes | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | - |
| Front Wet Disc Brake Surface Area | 22642 in² | 20378 in² | - |
| Rear - Wet Disc Brake Surface Area | 32730 in² | 30750 in² | - |
| Standards | Service and Secondary: ISO 3450:2011 | Service and Secondary: ISO 3450:2011 | - |
| Electric Retarding | Radial Grid Design | - | - |
| Dynamic Retarding Power - Continuous | 5480 HP | 5480 HP | - |
| Parking Brakes | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | - | - |
| Load Brake | Rear service brakes | Rear service brakes | - |
| Note | Anti-Lock Brake System (ABS) optional with CMD package | Anti-Lock Brake System (ABS) optional with CMD package | - |
| Parking Brake | - | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | - |
Weight Distributions - Approximate |
|||
| Front Axle - Empty | 47 % | 47 % | - |
| Rear Axle - Empty | 53 % | 53 % | - |
| Front Axle - Loaded | 33 % | 33 % | - |
| Rear Axle - Loaded | 67 % | 67 % | - |
| Note | Weight distributions optimized with Cat body. | Weight distributions optimized with Cat body. | - |
Capacity - HE Body - 100% fill factor |
|||
| Struck | 129-200 m³ (168-261 yd³) | 97-153 m³ (127-200 yd³) | - |
| Heaped (SAE 2:1) | 218-276 m³ (285-361 yd³) | 186-237 m³ (243-310 yd³) | - |
| Note | Contact your local Cat dealer for body recommendations. | Consult your local Cat dealer for body recommendations. | - |
Body Hoists |
|||
| Type | Twin, two-stage hydraulic cylinders with snubbing valve. | Twin, two-stage hydraulic cylinders with snubbing valve. | - |
| Pump Flow - High Idle | 257.3 gal/min | 257.3 gal/min | - |
| Relief Valve Setting - Raise | 3029 psi | 3029 psi | - |
| Body Raise Time - High Idle | 21 s | 21 s | - |
| Body Lower Time - Float | 22 s | 22 s | - |
| Body Power Down- High Idle | 17.5 s | 17.5 s | - |
| Note (1) | Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. | Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. | - |
| Note (2) | Power raise in both stages; power down capability in both stages. | Power raise in both stages; power down capability in both stages. | - |
| Note (3) | Automatic body-lower modulation reduces impact on frame. | Automatic body-lower modulation reduces impact on frame. | - |
Suspension |
|||
| Type | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments | - |
| Effective Cylinder Stroke - Front | 10 in | 4 in | - |
| Effective Cylinder Stroke - Rear | 5 in | 2 in | - |
| Rear axle - Oscillation | - | +/- 5.32 degrees | - |
Cab |
|||
| Air Conditioning | HFC - 134A refrigerant: 21,600 Btu/h | HFC - 134A refrigerant: 21,600 Btu/h | - |
| Heater / Defroster | 24600 Btu/h | 24600 Btu/h | - |
| Note | Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. | Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. | - |
| ROPS Standards (1) | ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. | ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. | - |
| FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. | - |
Engine - High Altitude Only |
|||
| Engine Model | Cat® C175-20 | - | - |
| Gross Power SAE J1995:2014 | 4150 HP | - | - |
| Net Power - SAE J1349:2011 | 4000 HP | - | - |
| Rated Speed | 1750 r/min | - | - |
| Emissions Rating | Fuel Optimized | - | - |
| Bore | 6.9 in | - | - |
| Stroke | 8.7 in | - | - |
| Displacement | 6469 in³ | - | - |
| Note 1 | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - | - |
| Note 2 | Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp | - | - |
Tires |
|||
| Rims | 44" x 63" Rims | 44" x 63" | - |
| Standard Tires | 59/80 R63 | 59/80 R63 | - |
| Note (1) | Quick Change Rims optional. | Quick Change Rims optional. | - |
| Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | - |
Dimensions (Approximate) |
|||
| Height - Top of ROPS | 22.1 ft | 22.05 ft | - |
| Overall Length | 51.44 ft | 51.44 ft | - |
| Wheel Base | 21.9 ft | 21.9 ft | - |
| Rear Axle - Tail | 16.07 ft | 16.07 ft | - |
| Dump Clearance - Empty | 5.72 ft | 5.72 ft | - |
| Loading Height - Empty | 25.54 ft | 23.85 ft | - |
| Overall Height - Body Raised | 48.85 ft | 48.85 ft | - |
| Centerline Front Tire Width | 23.06 ft | 23.06 ft | - |
| Front Axle Clearance - Loaded | 2.81 ft | 2.81 ft | - |
| Overall Canopy Width (with rock deflectors) | 33.15 ft | 33.15 ft | - |
| Outside Body/Canopy Width (without rock deflectors) | 31.62 ft | 31.62 ft | - |
| Inside Body Width | 29.44 ft | 29.44 ft | - |
| Front Canopy Height - Empty | 26.01 ft | 26.01 ft | - |
| Rear Axle Clearance - Loaded | 2.8 ft | 2.8 ft | - |
| Centerline of Rear Dual Tire Width | 19.5 ft | 19.5 ft | - |
| Overall Tire Width - Empty | 30.27 ft | 30.27 ft | - |
| Overall Length (High Altitude only) | 51.87 ft | - | - |
| Note | Dimensions listed includes canopy deflectors | Dimensions listed includes canopy deflectors | - |
Sound |
|||
| Sound Standards | The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. | The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. | - |
Add a Similar Product:
