Compare Equipment Go Back

798 AC Electric Drive Mining Truck
775G Off-Highway Truck
772G Off-Highway Truck
796 AC Electric Drive Mining Truck

Weights - Approximate

Nominal Rated Payload 410 ton (US) - - 360 ton (US)
Rated Gross Machine Weight 1375000 lb - - 1270000 lb
Chassis Weight 453826 lb - - 448415 lb
Body Weight Range 38 833 - 43 275 kg (85,611 - 95,406 lb) - - 38 833 – 42 907 kg (85,611 – 94,594 lb)
Note (1) Consult your tire manufacturer for maximum tire load. - - Consult your tire manufacturer for maximum tire load.
Note (2) Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. - - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (3) Body weight varies depending on how body is equipped. - - Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations

Engine

Gross Power - SAE J1995 3500 HP 825 HP 605 HP 3500 HP
Engine Model Cat® C175-16 Cat® C27 Cat® C18 Cat® C175-16
Net Power - SAE J1349 3405 HP - - 3405 HP
Optional Gross Power - SAE J1995 3100 HP - - -
Rated Speed 1800 r/min - - 1800 r/min
Emissions Rating Fuel Optimized - - Fuel Optimized
Bore 6.9 in 5.4 in 5.7 in 6.9 in
Stroke 8.7 in 6 in 7.2 in 8.7 in
Displacement 5187 in³ 1648 in³ 1105 in³ 5187 in³
Note (1) Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (2) U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
Note (3) Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp - - Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
Rated Net Power - SAE J1349 - 683 HP 550 HP -
Note - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. -
Rated Engine Speed - - 1700 r/min -
Number of Cylinders - - 6 -

Service Refill Capacities - High Altitude Only

Fuel Tank 2000 gal (US) - - -
Cooling System 273 gal (US) - - -
Crankcase 124 gal (US) - - -
Hydraulic Tank 273 gal (US) - - -
Hydraulic System (includes tank) 342 gal (US) - - -

Service Refill Capacities

Fuel Tank 1300 gal (US) - - 1300 gal (US)
Fuel Tank (Tier 4) 1200 gal (US) - - 1200 gal (US)
Diesel Exhaust Fluid Tank 100 gal (US) - - 100 gal (US)
Cooling System 211 gal (US) 45 gal (US) 33 gal (US) 211 gal (US)
Crankcase 82 gal (US) 24 gal (US) 17 gal (US) 82 gal (US)
Final Drive - Each 67 gal (US) - - 67 gal (US)
Hydraulic System - Including Tank 385 gal (US) - - 385 gal (US)
Hydraulic Tank 296 gal (US) - - 296 gal (US)
Grease Tank 90 lb - - 90 lb
Note (1) DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option - - DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
Fuel Tank Capacity - 210 gal (US) 140 gal (US) -
Differential - Final Drives - 38 gal (US) 47 gal (US) -
Steering System - Including Tank - 14 gal (US) 60 gal (US) -
Brake/Hoist Hydraulic Tank - 46.5 gal (US) 38 gal (US) -
Brake Hoist System - 85 gal (US) 60 gal (US) -
Torque Converter - Transmission System - - 17 gal (US) -
Front Wheels - Each - - - 7 gal (US)

Steering

Steer Angle 39 ° 31 ° 31 ° 39 °
Turning Diameter - Front 106.3 ft - - 106.3 ft
Steering Standards Steering Standards: ISO 5010:2007 ISO 5010:2007 ISO 5010:2007 Steering Standards: ISO 5010:2007
Note Turning Diameter (ISO 7457:1997) - - Turning Diameter (ISO 7457:1997)
Turning Diameter - 77.1 ft 57.7 ft -
Turning Circle - Clearance Diameter - 85.6 ft 66.6 ft -

AC Drive System

Total Reduction Ratio 35:01:00 - - 35:01:00
Top Speed - Loaded 40 mile/h - - 40 mile/h
Generator/Alternator Brushless, engine mounted, dual bearing - - Cat brushless, engine mounted, dual bearing
Controls IGBT Inverter Technology, air cooled, pressurized cabinet with filtration - - Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
Wheel Motor Cat high-torque AC induction, rear axle mounted - - Cat AC induction, rear axle mounted
Cooling System Cat variable speed, hydraulically driven cooling system - - Cat variable speed, hydraulically driven cooling system

Braking System

Service Brakes Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated - - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area 22642 in² - - 20378 in²
Rear - Wet Disc Brake Surface Area 32730 in² - - 30750 in²
Standards Service and Secondary: ISO 3450:2011 - - Service and Secondary: ISO 3450:2011
Electric Retarding Radial Grid Design - - -
Dynamic Retarding Power - Continuous 5480 HP - - 5480 HP
Parking Brakes Four-corner, Multi-disc, Spring Applied, Hydraulically Released - - -
Load Brake Rear service brakes - - Rear service brakes
Note Anti-Lock Brake System (ABS) optional with CMD package - - Anti-Lock Brake System (ABS) optional with CMD package
Parking Brake - - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released

Weight Distributions - Approximate

Front Axle - Empty 47 % - - 47 %
Rear Axle - Empty 53 % - - 53 %
Front Axle - Loaded 33 % - - 33 %
Rear Axle - Loaded 67 % - - 67 %
Note Weight distributions optimized with Cat body. - - Weight distributions optimized with Cat body.

Capacity - HE Body - 100% fill factor

Struck 129-200 m³ (168-261 yd³) - - 97-153 m³ (127-200 yd³)
Heaped (SAE 2:1) 218-276 m³ (285-361 yd³) - - 186-237 m³ (243-310 yd³)
Note Contact your local Cat dealer for body recommendations. - - Consult your local Cat dealer for body recommendations.

Body Hoists

Type Twin, two-stage hydraulic cylinders with snubbing valve. - - Twin, two-stage hydraulic cylinders with snubbing valve.
Pump Flow - High Idle 257.3 gal/min - - 257.3 gal/min
Relief Valve Setting - Raise 3029 psi - - 3029 psi
Body Raise Time - High Idle 21 s - - 21 s
Body Lower Time - Float 22 s - - 22 s
Body Power Down- High Idle 17.5 s - - 17.5 s
Note (1) Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. - - Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
Note (2) Power raise in both stages; power down capability in both stages. - - Power raise in both stages; power down capability in both stages.
Note (3) Automatic body-lower modulation reduces impact on frame. - - Automatic body-lower modulation reduces impact on frame.

Suspension

Type Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments - - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Effective Cylinder Stroke - Front 10 in - - 4 in
Effective Cylinder Stroke - Rear 5 in - - 2 in
Rear axle - Oscillation - - - +/- 5.32 degrees

Cab

Air Conditioning HFC - 134A refrigerant: 21,600 Btu/h - - HFC - 134A refrigerant: 21,600 Btu/h
Heater / Defroster 24600 Btu/h - - 24600 Btu/h
Note Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. - - Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
ROPS Standards (1) ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. - - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
FOPS Standards FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. - - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

Engine - High Altitude Only

Engine Model Cat® C175-20 - - -
Gross Power SAE J1995:2014 4150 HP - - -
Net Power - SAE J1349:2011 4000 HP - - -
Rated Speed 1750 r/min - - -
Emissions Rating Fuel Optimized - - -
Bore 6.9 in - - -
Stroke 8.7 in - - -
Displacement 6469 in³ - - -
Note 1 Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. - - -
Note 2 Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp - - -

Tires

Rims 44" x 63" Rims - - 44" x 63"
Standard Tires 59/80 R63 - - 59/80 R63
Note (1) Quick Change Rims optional. - - Quick Change Rims optional.
Note (2) Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. - - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

Dimensions (Approximate)

Height - Top of ROPS 22.1 ft - - 22.05 ft
Overall Length 51.44 ft - - 51.44 ft
Wheel Base 21.9 ft - - 21.9 ft
Rear Axle - Tail 16.07 ft - - 16.07 ft
Dump Clearance - Empty 5.72 ft - - 5.72 ft
Loading Height - Empty 25.54 ft - - 23.85 ft
Overall Height - Body Raised 48.85 ft - - 48.85 ft
Centerline Front Tire Width 23.06 ft - - 23.06 ft
Front Axle Clearance - Loaded 2.81 ft - - 2.81 ft
Overall Canopy Width (with rock deflectors) 33.15 ft - - 33.15 ft
Outside Body/Canopy Width (without rock deflectors) 31.62 ft - - 31.62 ft
Inside Body Width 29.44 ft - - 29.44 ft
Front Canopy Height - Empty 26.01 ft - - 26.01 ft
Rear Axle Clearance - Loaded 2.8 ft - - 2.8 ft
Centerline of Rear Dual Tire Width 19.5 ft - - 19.5 ft
Overall Tire Width - Empty 30.27 ft - - 30.27 ft
Overall Length (High Altitude only) 51.87 ft - - -
Note Dimensions listed includes canopy deflectors - - Dimensions listed includes canopy deflectors

Sound

Sound Standards The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. - - The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.

Weights

LRC Bare Chassis Weight without Hoist - 75118 lb 58414 lb -
LRC Bare Chassis Weight with Hoist - 76326 lb 59223 lb -
LRC Gross Vehicle Weight (Target) without Hoist - 246503 lb 180999 lb -
LRC Gross Vehicle Weight (Target) with Hoist - 246503 lb 180999 lb -
HRC Bare Chassis Weight without Hoist - 76573 lb 59567 lb -
HRC Bare Chassis Weight with Hoist - 77781 lb 60376 lb -
HRC Gross Vehicle Weight (Target) without Hoist - 246503 lb 180999 lb -
HRC Gross Vehicle Weight (Target) with Hoist - 246503 lb 180999 lb -
Note - LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. -

ROPS

Tractor ROPS - 85288 lb 77430 lb -

Operating Specifications

Nominal Water Tank Capacity - 15000 gal (US) 11000 gal (US) -

Transmission

Forward - 1 - 6.6 mile/h 8 mile/h -
Forward - 2 - 9.3 mile/h 10.9 mile/h -
Forward - 3 - 12.6 mile/h 14.8 mile/h -
Forward - 4 - 16.8 mile/h 19.8 mile/h -
Forward - 5 - 22.8 mile/h 26.9 mile/h -
Forward - 6 - 30.7 mile/h 36.2 mile/h -
Forward - 7 - 41.6 mile/h 49.2 mile/h -
Reverse - 8.7 mile/h 10.4 mile/h -
Note - Maximum travel speeds with standard 24.00R35 (E4) tires Maximum travel speeds with standard 21.00R33 (E4) tires. -

Brakes

Brake Surface - Front - 257 in² 216 in² -
Brake Surface - Rear - 9497 in² 7794 in² -
Add a Similar Product:
  • 775 Off-Highway Truck Add
  • 772 (07) Off-Highway Truck Add
  • 770 Off-Highway Truck Add
  • 797F Mining Truck Add
  • 794 AC Mining Truck Add
  • 793F Mining Truck Add
  • 789 Next Generation Add
  • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add