CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    796 AC Electric Drive Mining Truck
    View Product
    793F Mining Truck
    View Product Remove
    789 Next Generation
    View Product Remove

    Weights - Approximate
    Nominal Rated Payload 360 ton (US) 256 ton (US) 213 ton (US)
    Rated Gross Machine Weight 1270000 lb 851000 lb 715000 lb
    Chassis Weight 448415 lb 265639 lb -
    Body Weight Range 38 833 – 42 907 kg (85,611 – 94,594 lb) - -
    Note (1) Consult your tire manufacturer for maximum tire load. Consult your tire manufacturer for maximum tire load Consult your tire manufacturer for maximum tire load
    Note (2) Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard and mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations. -
    Body Weight - 67682 lb 60406 lb

    Engine
    Gross Power - SAE J1995 3500 HP 2650 HP -
    Engine Model Cat® C175-16 Cat® C175-16 Cat® 3516E
    Net Power - SAE J1349 3405 HP 2478 HP -
    Rated Speed 1800 r/min 1750 r/min 1650 r/min
    Emissions Rating Fuel Optimized - Fuel Optimized
    Bore 6.9 in 6.9 in 6.7 in
    Stroke 8.7 in 8.7 in 8.5 in
    Displacement 5187 in³ 5187 in³ 4766 in³
    Note (1) Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. EPA Tier 4 Final / EU Stage V available for applicable markets. Optional 1417 kW / 1,900 HP engine rating.
    Note (3) Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp - U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets.
    Emissions - Fuel Optimized -
    Gross Power - SAE J1995:2014 - - 2100 HP
    Net Power - SAE J1349:2011 - - 1975 HP

    Steering
    Steer Angle 39 ° 36 ° 36.07 °
    Turning Diameter - Front 106.3 ft 93.2 ft -
    Steering Standards Steering Standards: ISO 5010:2007 SAE J15111 OCT90, ISO 5010:1992 ISO 5010:2007
    Note Turning Diameter (ISO 7457:1997) - -

    Service Refill Capacities
    Fuel Tank 1300 gal (US) 750 gal (US) 1000 gal (US)
    Fuel Tank (Tier 4) 1200 gal (US) - 55 gal (US)
    Diesel Exhaust Fluid Tank 100 gal (US) 62 gal (US) 62 gal (US)
    Cooling System 211 gal (US) 284 gal (US) 180 gal (US)
    Crankcase 82 gal (US) 82 gal (US) 77 gal (US)
    Front Wheels - Each 7 gal (US) - 5.8 gal (US)
    Final Drive - Each 67 gal (US) - -
    Hydraulic Tank 296 gal (US) - -
    Hydraulic System - Including Tank 385 gal (US) - -
    Grease Tank 90 lb - -
    Note (1) DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option DEF Tank only available for EPA Tier 4 engine option. -
    Fuel Tank - Optional - 1300 gal (US) -
    Rear Axle - Housing - 260 gal (US) -
    Steering System - Including Tank - 77 gal (US) -
    Brake Hoist System - Includes Tank - 347 gal (US) 347 gal (US)
    Torque Converter - Transmission Sump - 27 gal (US) -
    Torque Converter/Transmission System - Including Sump - 55 gal (US) -
    Fuel Tank - Standard - - 550 gal (US)
    Differentials - - 161 gal (US)
    Steering System - - 42 gal (US)
    Steering System - Includes Tank - - 46 gal (US)
    Brake Hoist System - - 169 gal (US)
    Torque Converter - Transmission System - Including Sump - - 55 gal (US)

    AC Drive System
    Total Reduction Ratio 35:01:00 - -
    Top Speed - Loaded 40 mile/h - -
    Generator/Alternator Cat brushless, engine mounted, dual bearing - -
    Controls Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration - -
    Wheel Motor Cat AC induction, rear axle mounted - -
    Cooling System Cat variable speed, hydraulically driven cooling system - -

    Braking System
    Service Brakes Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area 20378 in² 13921 in³ 12662 in²
    Rear - Wet Disc Brake Surface Area 30750 in² 20847 in³ 20861 in²
    Standards Service and Secondary: ISO 3450:2011 (Service and Secondary): ISO 3450:1996 (Service and Secondary) ISO 3450:2011
    Parking Brake Four-corner, Multi-disc, Spring Applied, Hydraulically Released - Four-corner, Multi-disc, Spring applied, Hydraulically Released
    Load Brake Rear service brakes Rear service brakes -
    Dynamic Retarding Power - Continuous 5480 HP - -
    Note Anti-Lock Brake System (ABS) optional with CMD package Anti-Lock Brake System (ABS) optional with CMD package -
    Parking Brakes - Four-corner, Multi-disc, Spring Applied, Hydraulically Released -

    Weight Distributions - Approximate
    Front Axle - Empty 47 % 48 % 50%
    Rear Axle - Empty 53 % 52 % 50%
    Front Axle - Loaded 33 % 33 % 33%
    Rear Axle - Loaded 67 % 67 % 67%
    Note Weight distributions optimized with Cat body. - -

    Tires
    Standard Tires 59/80 R63 40.00 R57 37 R57
    Rims 44" x 63" 29" or 32" 29” x 57” Rims
    Note (1) Quick Change Rims optional. Extended life wheel stations optional. Quick Change Rims optional
    Note (2) Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Note - Quick Change Rims optional. -
    Optional Tires - - 40 R57
    Optional Tire - - 42/90 R57

    Capacity - HE Body - 100% fill factor
    Struck 97-153 m³ (127-200 yd³) - -
    Heaped (SAE 2:1) 186-237 m³ (243-310 yd³) - -
    Note Consult your local Cat dealer for body recommendations. - -

    Body Hoists
    Type Twin, two-stage hydraulic cylinders with snubbing valve. Twin, two-stage hydraulic cylinders with snubbing valve Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle 257.3 gal/min 224 gal/min 106.5 gal/min
    Relief Valve Setting - Raise 3029 psi 2955 psi 2749 psi
    Body Raise Time - High Idle 21 s 19 s 14 s
    Body Lower Time - Float 22 s 20 s 16 s
    Body Power Down- High Idle 17.5 s - -
    Note (1) Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. - -
    Note (2) Power raise in both stages; power down capability in both stages. - -
    Note (3) Automatic body-lower modulation reduces impact on frame. - -
    Body Power Down - High Idle - 17.5 s -

    Sound
    Sound Standards The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. -
    Sound Standards (1) - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. -

    Suspension
    Type Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments
    Effective Cylinder Stroke - Front 4 in 5.1 in 4.12 in
    Effective Cylinder Stroke - Rear 2 in 4.2 in 3.67 in
    Rear axle - Oscillation +/- 5.32 degrees ±4.9 degrees +/- 5 degrees

    Cab
    Air Conditioning HFC - 134A refrigerant: 21,600 Btu/h Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr (HFC - 134A refrigerant) 24,500 Btu/hr
    Heater / Defroster 24600 Btu/h 38900 Btu/h 33300 Btu/h
    Note Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. -
    ROPS Standards (1) ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396. The operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008.
    FOPS Standards FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
    ROPS Standards (2) - ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.

    Dimensions (Approximate)
    Height - Top of ROPS 22.05 ft - 5550 mm
    Overall Length 51.44 ft - 12970 mm
    Wheel Base 21.9 ft - 57000 mm
    Rear Axle - Tail 16.07 ft - 3856 mm
    Dump Clearance - Empty 5.72 ft - -
    Loading Height - Empty 23.85 ft - 6147 mm
    Overall Height - Body Raised 48.85 ft - 11534 mm
    Centerline Front Tire Width 23.06 ft - 5410 mm
    Front Axle Clearance - Loaded 2.81 ft - -
    Overall Canopy Width (with rock deflectors) 33.15 ft - -
    Outside Body/Canopy Width (without rock deflectors) 31.62 ft - -
    Inside Body Width 29.44 ft - 6920 mm
    Front Canopy Height - Empty 26.01 ft - -
    Rear Axle Clearance - Loaded 2.8 ft - -
    Centerline of Rear Dual Tire Width 19.5 ft - 4695 mm
    Overall Tire Width - Empty 30.27 ft - -
    Note Dimensions listed includes canopy deflectors - -
    Overall Body Length - - 12945 mm
    Inside Body Length - - 8730 mm
    Ground Clearance - - 1304 mm
    Dump Clearance - - 1585 mm
    Rear Sidewall Height - - 1010 mm
    Inside Body Depth - Maximum - - 3075 mm
    Operating Width - - 7822 mm
    Engine Guard Clearance - - 1290 mm
    Overall Canopy Width - - 7769 mm
    Outside Body Width - - 7123 mm
    Front Canopy Height - - 6739 mm
    Rear Axle - Clearance - - 1263 mm
    Overall Tire Width - - 7120 mm

    Capacity - HP Body - 100% Fill Factor
    Struck - 112.6-151 m³ (147-197.5 yd³) 77 m3(101 yd3)
    Heaped (SAE 2:1)* - 162-191 m³ (212-250 yd³) 143 m3(187 yd2)
    Note (1) - Contact your local Cat dealer for body recommendation. Consult your local Cat dealer for body recommendations
    Note (2) - *ISO 6483:1980 -

    Transmission
    Forward - 1 - 8 mile/h 7.8 mile/h
    Forward - 2 - 10.8 mile/h 10.6 mile/h
    Forward - 3 - 14.8 mile/h 14.4 mile/h
    Forward - 4 - 19.9 mile/h 19.4 mile/h
    Forward - 5 - 27.1 mile/h 26.3 mile/h
    Forward - 6 - 37.3 mile/h 35.5 mile/h
    Reverse - 7.3 mile/h 7.3 mile/h
    Top Speed - Loaded - 37.3 mile/h 35.5 mile/h

    Final Drives
    Differential Ratio - 1.8:1 2.35:1
    Planetary Ratio - 16:01 10.83:1
    Total Reduction Ratio - 26.8:1 25.46:1
    Type - - Double reduction, planetary with full floating axles

    Brakes
    Brake Surface - Front - 13921 in² -
    Brake Surface - Rear - 20847 in² -
    Standards - J-ISO 3450 JAN88, ISO 3450:1996 -

    Capacity - MSD II - 100% Fill Factor
    Struck - 112-142 m³ (146-186 yd³) -
    Heaped (SAE 2:1) - 159-190 m3 (209-250 yd3) -
    Note - Contact your local Cat dealer for body recommendation. -

    ROPS
    ROPS Standards - ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria. -
    FOPS Standards - FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria. -
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 775G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 797F Mining Truck Add
    • 794 AC Mining Truck Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add