CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    796 AC Electric Drive Mining Truck
    View Product
    794 AC Mining Truck
    View Product Remove
    789 Next Generation
    View Product Remove

    Weights - Approximate
    Nominal Rated Payload 360 ton (US) 327 ton (US) 213 ton (US)
    Rated Gross Machine Weight 1270000 lb 1150000 lb 715000 lb
    Chassis Weight 448415 lb 426237 lb -
    Body Weight Range 38 833 – 42 907 kg (85,611 – 94,594 lb) - -
    Note (1) Consult your tire manufacturer for maximum tire load. Consult your tire manufacturer for maximum tire load. Consult your tire manufacturer for maximum tire load
    Note (2) Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires Chassis weight with full fuel and fluids, standard and mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations. -
    Body Weight - 64346 lb 60406 lb
    Note (4) - Tier 4 Final / Stage V chassis weight: 426312 lb (193372 kg) -

    Engine
    Gross Power - SAE J1995 3500 HP 3500 HP -
    Engine Model Cat® C175-16 Cat® C175-16 Cat® 3516E
    Net Power - SAE J1349 3405 HP 3405 HP -
    Rated Speed 1800 r/min 1800 r/min 1650 r/min
    Emissions Rating Fuel Optimized Fuel Optimized Fuel Optimized
    Bore 6.9 in 6.9 in 6.7 in
    Stroke 8.7 in 8.7 in 8.5 in
    Displacement 5187 in³ 5187 in³ 4766 in³
    Note (1) Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Contact factory for high altitude configuration. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. Tier 4 / EU Stage V option available for regions that require these emissions standards. Optional 1417 kW / 1,900 HP engine rating.
    Note (3) Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp Tier 4 / EU Stage V engine option Net Power - SAE J1349: 3434 HP (2561 kW) U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets.
    Standard Gross Power - SAE J1995 - 3500 HP -
    Optional Gross Power - SAE J1995 - 3100 HP -
    Optional Gross Power - SAE J1995 (Option 2) - 2750 HP -
    Gross Power - SAE J1995:2014 - - 2100 HP
    Net Power - SAE J1349:2011 - - 1975 HP

    Steering
    Steer Angle 39 ° 39 ° 36.07 °
    Turning Diameter - Front 106.3 ft - -
    Steering Standards Steering Standards: ISO 5010:2007 ISO 5010:2007 ISO 5010:2007
    Note Turning Diameter (ISO 7457:1997) Gross Machine Operating Weight is 521 631 kg (1,150,000 lb). -

    Service Refill Capacities
    Fuel Tank 1300 gal (US) 1300 gal (US) 1000 gal (US)
    Fuel Tank (Tier 4) 1200 gal (US) - 55 gal (US)
    Diesel Exhaust Fluid Tank 100 gal (US) 100 gal (US) 62 gal (US)
    Cooling System 211 gal (US) 211 gal (US) 180 gal (US)
    Crankcase 82 gal (US) 82 gal (US) 77 gal (US)
    Front Wheels - Each 7 gal (US) - 5.8 gal (US)
    Final Drive - Each 67 gal (US) 67 gal (US) -
    Hydraulic Tank 296 gal (US) 296 gal (US) -
    Hydraulic System - Including Tank 385 gal (US) 385 gal (US) -
    Grease Tank 90 lb - -
    Note (1) DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option DEF Tank only available for EPA Tier 4 / EU Stage V engine option. -
    Fuel Tank - Standard - - 550 gal (US)
    Differentials - - 161 gal (US)
    Steering System - - 42 gal (US)
    Steering System - Includes Tank - - 46 gal (US)
    Brake Hoist System - - 169 gal (US)
    Brake Hoist System - Includes Tank - - 347 gal (US)
    Torque Converter - Transmission System - Including Sump - - 55 gal (US)

    AC Drive System
    Total Reduction Ratio 35:01:00 35:01:00 -
    Top Speed - Loaded 40 mile/h 37 mile/h -
    Generator/Alternator Cat brushless, engine mounted, dual bearing Brushless, engine mounted, dual bearing -
    Controls Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration IGBT Inverter Technology, air cooled, pressurized cabinet with filtration -
    Wheel Motor Cat AC induction, rear axle mounted High-torque AC induction, rear axle mounted -
    Cooling System Cat variable speed, hydraulically driven cooling system Variable speed, hydraulically driven cooling system -

    Braking System
    Service Brakes Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area 20378 in² 20378 in² 12662 in²
    Rear - Wet Disc Brake Surface Area 30750 in² 30750 in² 20861 in²
    Standards Service and Secondary: ISO 3450:2011 ISO 3450:2011 (Service and Secondary) ISO 3450:2011
    Parking Brake Four-corner, Multi-disc, Spring Applied, Hydraulically Released Four-corner, Multi-disc, Spring applied, Hydraulically Released Four-corner, Multi-disc, Spring applied, Hydraulically Released
    Load Brake Rear service brakes Rear service brakes -
    Dynamic Retarding Power - Continuous 5480 HP 5480 HP -
    Note Anti-Lock Brake System (ABS) optional with CMD package - -

    Weight Distributions - Approximate
    Front Axle - Empty 47 % 49 % 50%
    Rear Axle - Empty 53 % 51 % 50%
    Front Axle - Loaded 33 % 33 % 33%
    Rear Axle - Loaded 67 % 67 % 67%
    Note Weight distributions optimized with Cat body. - -

    Tires
    Standard Tires 59/80 R63 53/80 R63 37 R57
    Rims 44" x 63" 36" x 63" 29” x 57” Rims
    Note (1) Quick Change Rims optional. Quick Change Rims optional. Quick Change Rims optional
    Note (2) Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Optional Tires - - 40 R57
    Optional Tire - - 42/90 R57

    Capacity - HE Body - 100% fill factor
    Struck 97-153 m³ (127-200 yd³) 108-133 m³ (142-175 yd³) -
    Heaped (SAE 2:1) 186-237 m³ (243-310 yd³) 180-222 m³ (236-290 yd³) -
    Note Consult your local Cat dealer for body recommendations. Contact your local Cat dealer for body recommendations. -
    Dump Body Plate Thickness Varies Depending on Body Selection - Floor Plate - 0.63 in -
    Dump Body Plate Thickness Varies Depending on Body Selection - Front Plate - 0.35 in -
    Dump Body Plate Thickness Varies Depending on Body Selection - Side Plate - 0.31 in -
    Dump Body Plate Thickness Varies Depending on Body Selection - Canopy Plate - 0.2 in -

    Body Hoists
    Type Twin, two-stage hydraulic cylinders with snubbing valve. - Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle 257.3 gal/min - 106.5 gal/min
    Relief Valve Setting - Raise 3029 psi 3029 psi 2749 psi
    Body Raise Time - High Idle 21 s 24 s 14 s
    Body Lower Time - Float 22 s - 16 s
    Body Power Down- High Idle 17.5 s - -
    Note (1) Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. Twin, two-stage hydraulic cylinders mounted inside main frame; double-acting cylinders in both stages. -
    Note (2) Power raise in both stages; power down capability in both stages. Power raise in both stages; power down in both stages possible. -
    Note (3) Automatic body-lower modulation reduces impact on frame. Automatic body-lower modulation reduces impact on frame. -
    Pump Flow - High Idle (HAA at 1,800 rpm) - 221 gal/min -
    Pump Flow - High Idle (LAA at 1,960 rpm) - 240 gal/min -
    High Idle Body Lower Time - Float - 20 s -
    Total Cycle Time - 44 s -

    Sound
    Sound Standards The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. - -
    Sound Standards (1) - The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 75 dB(A) for cab offered by Caterpillar when properly installed, maintained, and tested with doors and windows closed. -
    Sound Standards (2) - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. -

    Suspension
    Type Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments
    Effective Cylinder Stroke - Front 4 in - 4.12 in
    Effective Cylinder Stroke - Rear 2 in - 3.67 in
    Rear axle - Oscillation +/- 5.32 degrees - +/- 5 degrees

    Cab
    Air Conditioning HFC - 134A refrigerant: 21,600 Btu/h - (HFC - 134A refrigerant) 24,500 Btu/hr
    Heater / Defroster 24600 Btu/h - 33300 Btu/h
    Note Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. - -
    ROPS Standards (1) ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. Rollover Protective Structure (ROPS) meets ISO 3471:2008 criteria for operator and ISO 13459:2012 for trainer. The operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008.
    FOPS Standards FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II for operator and ISO 13459:2012 Level II for trainer. FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
    ROPS Standards (2) - - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.

    Dimensions (Approximate)
    Height - Top of ROPS 22.05 ft 22.25 ft 5550 mm
    Overall Length 51.44 ft 50.75 ft 12970 mm
    Wheel Base 21.9 ft 21.83 ft 57000 mm
    Rear Axle - Tail 16.07 ft 15.5 ft 3856 mm
    Dump Clearance - Empty 5.72 ft - -
    Loading Height - Empty 23.85 ft 22.92 ft 6147 mm
    Overall Height - Body Raised 48.85 ft 48.42 ft 11534 mm
    Centerline Front Tire Width 23.06 ft 23 ft 5410 mm
    Front Axle Clearance - Loaded 2.81 ft - -
    Overall Canopy Width (with rock deflectors) 33.15 ft - -
    Outside Body/Canopy Width (without rock deflectors) 31.62 ft - -
    Inside Body Width 29.44 ft 28.08 ft 6920 mm
    Front Canopy Height - Empty 26.01 ft - -
    Rear Axle Clearance - Loaded 2.8 ft - -
    Centerline of Rear Dual Tire Width 19.5 ft 18.75 ft 4695 mm
    Overall Tire Width - Empty 30.27 ft - -
    Note Dimensions listed includes canopy deflectors - -
    Ground Clearance - 2.67 ft 1304 mm
    Dump Clearance - 3 ft 1585 mm
    Front Axle Clearance - 3.17 ft -
    Canopy Width (without optional rock deflectors) - 29.75 ft -
    Outside Body Width - 29.75 ft 7123 mm
    Front Canopy Height - 26.33 ft 6739 mm
    Rear Axle - Clearance - 3.08 ft 1263 mm
    Overall Tire Width - 28.67 ft 7120 mm
    Overall Canopy Width - 31.5 ft 7769 mm
    Overall Body Length - - 12945 mm
    Inside Body Length - - 8730 mm
    Rear Sidewall Height - - 1010 mm
    Inside Body Depth - Maximum - - 3075 mm
    Operating Width - - 7822 mm
    Engine Guard Clearance - - 1290 mm

    Final Drives
    Total Reduction Ratio - 35:01:00 25.46:1
    Planetary Ratio - - 10.83:1
    Type - - Double reduction, planetary with full floating axles
    Differential Ratio - - 2.35:1

    Transmission
    Forward - 1 - - 7.8 mile/h
    Forward - 2 - - 10.6 mile/h
    Forward - 3 - - 14.4 mile/h
    Forward - 4 - - 19.4 mile/h
    Forward - 5 - - 26.3 mile/h
    Forward - 6 - - 35.5 mile/h
    Reverse - - 7.3 mile/h
    Top Speed - Loaded - - 35.5 mile/h

    Capacity - HP Body - 100% Fill Factor
    Struck - - 77 m3(101 yd3)
    Heaped (SAE 2:1)* - - 143 m3(187 yd2)
    Note (1) - - Consult your local Cat dealer for body recommendations
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 775G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 797F Mining Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add
    • 793F Mining Truck Add