Compare Equipment Go Back
789 Next Generation |
|
|
|
Weights - Approximate |
|||
---|---|---|---|
Nominal Rated Payload | 213 ton (US) | - | - |
Rated Gross Machine Weight | 715000 lb | - | - |
Body Weight | 60406 lb | - | - |
Note (1) | Consult your tire manufacturer for maximum tire load | - | - |
Note (2) | Chassis weight with full fuel and fluids, standard and mandatory attachments, hoist, body mounting group, rims, and tires. | - | - |
Engine |
|||
Gross Power - SAE J1995:2014 | 2100 HP | - | - |
Engine Model | Cat® 3516E | - | - |
Net Power - SAE J1349:2011 | 1975 HP | - | - |
Rated Speed | 1650 r/min | - | - |
Emissions Rating | Fuel Optimized | - | - |
Bore | 6.7 in | - | - |
Stroke | 8.5 in | - | - |
Displacement | 4766 in³ | - | - |
Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - | - |
Note (2) | Optional 1417 kW / 1,900 HP engine rating. | - | - |
Note (3) | U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets. | - | - |
Weight Distributions - Approximate |
|||
Front Axle - Empty | 50% | - | - |
Rear Axle - Loaded | 67% | - | - |
Rear Axle - Empty | 50% | - | - |
Front Axle - Loaded | 33% | - | - |
Final Drives |
|||
Planetary Ratio | 10.83:1 | - | - |
Total Reduction Ratio | 25.46:1 | - | - |
Type | Double reduction, planetary with full floating axles | - | - |
Differential Ratio | 2.35:1 | - | - |
Transmission |
|||
Forward - 1 | 7.8 mile/h | - | - |
Forward - 2 | 10.6 mile/h | - | - |
Forward - 3 | 14.4 mile/h | - | - |
Forward - 4 | 19.4 mile/h | - | - |
Forward - 5 | 26.3 mile/h | - | - |
Forward - 6 | 35.5 mile/h | - | - |
Reverse | 7.3 mile/h | - | - |
Top Speed - Loaded | 35.5 mile/h | - | - |
Tires |
|||
Standard Tires | 37 R57 | - | - |
Optional Tires | 40 R57 | - | - |
Optional Tire | 42/90 R57 | - | - |
Rims | 29” x 57” Rims | - | - |
Note (1) | Quick Change Rims optional | - | - |
Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | - | - |
Braking System |
|||
Service Brakes | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | - | - |
Front Wet Disc Brake Surface Area | 12662 in² | - | - |
Rear - Wet Disc Brake Surface Area | 20861 in² | - | - |
Standards | (Service and Secondary) ISO 3450:2011 | - | - |
Parking Brake | Four-corner, Multi-disc, Spring applied, Hydraulically Released | - | - |
Capacity - HP Body - 100% Fill Factor |
|||
Struck | 77 m3(101 yd3) | - | - |
Heaped (SAE 2:1)* | 143 m3(187 yd2) | - | - |
Note (1) | Consult your local Cat dealer for body recommendations | - | - |
Body Hoists |
|||
Type | Twin, two-stage hydraulic cylinders with snubbing valve. | - | - |
Pump Flow - High Idle | 106.5 gal/min | - | - |
Relief Valve Setting - Raise | 2749 psi | - | - |
Body Raise Time - High Idle | 14 s | - | - |
Body Lower Time - Float | 16 s | - | - |
Suspension |
|||
Type | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments | - | - |
Effective Cylinder Stroke - Front | 4.12 in | - | - |
Effective Cylinder Stroke - Rear | 3.67 in | - | - |
Rear axle - Oscillation | +/- 5 degrees | - | - |
Service Refill Capacities |
|||
Fuel Tank - Standard | 550 gal (US) | - | - |
Fuel Tank | 1000 gal (US) | - | - |
Fuel Tank (Tier 4) | 55 gal (US) | - | - |
Diesel Exhaust Fluid Tank | 62 gal (US) | - | - |
Cooling System | 180 gal (US) | - | - |
Crankcase | 77 gal (US) | - | - |
Front Wheels - Each | 5.8 gal (US) | - | - |
Differentials | 161 gal (US) | - | - |
Steering System | 42 gal (US) | - | - |
Steering System - Includes Tank | 46 gal (US) | - | - |
Brake Hoist System | 169 gal (US) | - | - |
Brake Hoist System - Includes Tank | 347 gal (US) | - | - |
Torque Converter - Transmission System - Including Sump | 55 gal (US) | - | - |
Cab |
|||
Air Conditioning | (HFC - 134A refrigerant) 24,500 Btu/hr | - | - |
Heater / Defroster | 33300 Btu/h | - | - |
ROPS Standards (1) | The operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008. | - | - |
ROPS Standards (2) | ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. | - | - |
FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. | - | - |
Steering |
|||
Steer Angle | 36.07 ° | - | - |
Steering Standards | ISO 5010:2007 | - | - |
Dimensions (Approximate) |
|||
Height - Top of ROPS | 5550 mm | - | - |
Overall Body Length | 12945 mm | - | - |
Inside Body Length | 8730 mm | - | - |
Overall Length | 12970 mm | - | - |
Wheel Base | 57000 mm | - | - |
Rear Axle - Tail | 3856 mm | - | - |
Ground Clearance | 1304 mm | - | - |
Dump Clearance | 1585 mm | - | - |
Loading Height - Empty | 6147 mm | - | - |
Rear Sidewall Height | 1010 mm | - | - |
Inside Body Depth - Maximum | 3075 mm | - | - |
Overall Height - Body Raised | 11534 mm | - | - |
Operating Width | 7822 mm | - | - |
Centerline Front Tire Width | 5410 mm | - | - |
Engine Guard Clearance | 1290 mm | - | - |
Overall Canopy Width | 7769 mm | - | - |
Outside Body Width | 7123 mm | - | - |
Inside Body Width | 6920 mm | - | - |
Front Canopy Height | 6739 mm | - | - |
Rear Axle - Clearance | 1263 mm | - | - |
Centerline of Rear Dual Tire Width | 4695 mm | - | - |
Overall Tire Width | 7120 mm | - | - |
Add a Similar Product: