Compare Equipment Go Back
6030 Hydraulic Shovel |
6015 Hydraulic Shovel |
6040 Hydraulic Mining Shovel |
6060 Hydraulic Mining Shovel |
|
General |
||||
---|---|---|---|---|
Engine Output - SAE J1995 | 1649 HP | 824 HP | 2079 HP | 3015 HP |
Bucket Payload | 33 ton (US) | 16.1 ton (US) | 43.7 ton (US) | 67 ton (US) |
Operating Weight | 324 ton (US) | 154.3 ton (US) | 446 ton (US) | 660 ton (US) |
Note | Specifications shown above apply to the highly regulated Face Shovel configuration. Backhoe and Frontless configurations are also available for all regions. | Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available. | Specifications above apply to the HRC Face Shovel configuration. Backhoe and Frontless configurations are also available for both HRC and LRC. | Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available. |
Diesel Engine - Highly Regulated |
||||
Gross Power - SAE J1995 | 1649 HP | - | - | 3015 HP |
Net Power - ISO 9249 | 1625 HP | - | - | 2979 HP |
Net Power - SAE J1349 | 1541 HP | - | - | 2810 HP |
Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards | - | - | Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions. |
Diesel Engine - Lesser Regulated |
||||
Gross Power - SAE J1995 | 1531 HP | - | - | 3025 HP |
Net Power - SAE J1349 | 1425 HP | - | - | 2821 HP |
Net Power - ISO 9249 | 1511 HP | - | - | 2990 HP |
Emissions | Meets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 2 | - | - | Optimized for fuel consumption. |
Diesel Engines |
||||
Number of Cylinders - Each Engine | 12 | - | 12 | 12 |
Bore | 5.42 in | - | 5.71 in | 6.69 in |
Stroke | 6 in | - | 6.38 in | 8.46 in |
Displacement | 1648 in³ | - | 1959 in³ | 3574 in³ |
Aspiration | Turbocharged and air-to-air aftercooled | - | Turbocharged and air-to-air aftercooled | Turbocharged and charge air-cooled |
Components (1) | Hydraulically driven radiator fan with electronically controlled fan speed | - | Additional high-capacity water separator | Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs) |
Components (2) | Micro processed engine management | - | Two-stage fuel filter including water separator | High-capacity water separator |
Components (3) | Heavy-duty air filters | - | Heavy-duty air filters | Two-stage fuel filter with series filtration |
Components (4) | Two-stage fuel filter, including water separator | - | Microprocessed engine management | Heavy-duty air filters |
Components (5) | Additional high-capacity water separator | - | Hydraulically driven radiator fan with electronically controlled fan speed | Microprocessed engine management |
Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards | - | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards | - |
Fuel Tank Capacity | 1342 gal (US) | - | 2098 gal (US) | - |
Rated Speed | - | - | - | 1,800 min-1 (1,800 rpm) |
Components (6) | - | - | - | Hydraulically driven radiator fan with electronically controlled fan speed |
Components (7) | - | - | - | Exhaust manifold and turbo heat shields |
Electrical System - Diesel Drive |
||||
System Voltage | 24V | - | 24V | - |
Batteries in Series/Parallel Installation | 4 x 210 Ah at 12V each; 420 Ah with 24V in total | - | 6 x 210 Ah - 12 V each; 630 Ah - 24 V in total | - |
Components (1) | Battery isolation relays | - | 6 maintenance-free batteries | - |
Components (2) | Emergency stop switches accessible from ground level and in engine module | - | Battery isolation relays and switches | - |
Components (3) | 14 LED high-brightness working flood lights | - | Emergency stop switches accessible from ground level, in engine module and in operator's cab | - |
Components (4) | 11 LED service lights | - | 14 LED high-brightness working flood lights | - |
Components (5) | - | - | 11 LED high-brightness service lights | - |
Electrical System |
||||
Batteries | 4 maintenance-free batteries | 4 × 200 Ah (12 V each) | - | - |
System Voltage | - | 24 V | - | 24 V |
Alternator Rating | - | 150 A (24 V) in total | - | - |
Components (1) | - | Emergency stop in cabin, engine module, pump room and on service station accessible from ground level | - | 6 maintenance-free batteries |
Components (2) | - | Four maintenance free batteries | - | Lockable battery isolator switch |
Components (3) | - | Lockable battery isolation switch | - | Lockable starter isolator switch |
Components (5) | - | 14 LED high-brightness working lights | - | 17 LED service lights |
Components (4) | - | 5 LED service lights | - | 13 LED high-brightness working flood lights |
Components (6) | - | 2 electric horns | - | 2 electric horns (1 cab module; 1 oil cooler module) |
Components (7) | - | Two (2) lights for rear end | - | - |
Components (9) | - | One (1) beacon light on cabin roof | - | - |
Components (8) | - | One (1) light for machine deck/service | - | - |
Batteries in Series/Parallel Installation | - | - | - | 6 x 210 Ah; 12 V each; 630 Ah 24 V in total |
Operating Weights |
||||
6030 FS - Standard Track Pads | 3.25 ft | - | - | - |
6030 FS - Operating Weight | 657640 lb | - | - | - |
6030 FS - Ground Pressure | 32.2 psi | - | - | - |
6030 - Standard Track Pads | 3.25 ft | - | - | - |
6030 - Operating Weight | 660060 lb | - | - | - |
6030 - Ground Pressure | 32.3 psi | - | - | - |
Note | Other track pads available on request. Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and 100% fuel and lubricants. | - | 1600 mm track pads available as option | Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants. |
6040 FS - Standard Track Pads | - | - | 3.9 ft | - |
6040 FS - Operating Weight | - | - | 891980 lb | - |
6040 FS - Ground Pressure | - | - | 24.1 N/cm2 (35.0 psi) | - |
6040 - Standard Track Pads | - | - | 3.9 ft | - |
6040 - Operating Weight | - | - | 897930 lb | - |
6040 - Ground Pressure | - | - | 24.3 N/cm2 (35.3 psi) | - |
6040 FS - Note | - | - | Other track pads available on request | - |
6060 FS - Standard Track Pads | - | - | - | 4.58 ft |
6060 FS - Operating Weight | - | - | - | 1320110 lb |
6060 FS - Ground Pressure | - | - | - | 26.6 N/cm2 (38.5 psi) |
Backhoe - Standard Track Pads | - | - | - | 4.58 ft |
Backhoe - Operating Weight | - | - | - | 1323860 lb |
Backhoe - Ground Pressure | - | - | - | 26.7 N/cm2 (38.7 psi) |
Hydraulic System with Pump Managing System |
||||
Hydraulic Tank Capacity - Approximately | 707 gal (US) | - | - | - |
Total Volume of Hydraulic Oil - Approximately | 925 gal (US) | - | - | - |
Main Pumps | 4 x variable swash plate pumps | - | - | - |
Main Pumps - Maximum Oil Flow - Diesel Version | 4 x 552 L/min (4 x 146 gal/min) | - | 4 x 724 L/min (4 x 191 gal/min) | 8 x 650 L/min (8 x 172 gal/min) |
Maximum Pressure - Attachment | 4495 psi | - | 4350 psi | 4640 psi |
Maximum Pressure - Travel | 5220 psi | - | 5080 psi | 5220 psi |
Swing Pumps | 2 x reversible swash plate double pumps | - | - | - |
Swing Pumps - Maximum Oil Flow - Diesel Version | 4 x 197 L/min (4 x 52 gal/min) | - | 4 x 321 L/min (4 x 85 gal/min) | 4 x 352 L/min (4 x 93 gal/min) |
Maximum Pressure - Swing Pumps | 5076 psi | - | 5080 psi | 5075 psi |
Hydraulic Tank Capacity - Diesel Version - Approximately | - | - | 898 gal (US) | - |
Total Volume of Hydraulic Oil - Diesel Version - Approximately | - | - | 1532 gal (US) | - |
Main Pumps - Diesel Version | - | - | 4 x variable swash plate pumps | 8 variable swash plate pumps |
Swing Pumps - Diesel Version | - | - | 4 x reversible swash plate pump | 4 reversible swash plate pumps |
Hydraulic Oil Cooling |
||||
Oil Flow of Cooling Pumps - Diesel Version | 2 x 467 L/min (2 x 123 gal/min) | - | 2 x 799 L/min (2 x 211 gal/min) | - |
Diameter - Fan | 48 in | - | 2 × 1524 mm (2 × 60 in) | 46 in |
Features (1) | - | - | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running |
Features (2) | - | - | Fan speed is thermostatically controlled | Fan speed and flow of oil to the coolers are thermostatically controlled |
Features (3) | - | - | Extremely high cooling efficiency to ensure optimum oil temperature | Extremely high cooling efficiency to ensure optimum oil temperature |
Components (1) | - | - | Gear type cooling pumps supplying high-volume, low-pressure oil to aluminum coolers | - |
Components (2) | - | - | Variable axial piston pumps supplying low-volume, high-pressure oil to fans | - |
Oil Flow of Cooling Pumps | - | - | - | 4 x 488 L/min (4 x 129 gal/min) |
Components | - | - | - | 4 cooling fans |
Features (4) | - | - | - | Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers |
Swing System |
||||
Swing Drive | 2 compact planetary transmissions with axial piston motors | Two (2) compact planetary transmissions with axial piston motors | 3 compact planetary transmissions with axial piston motors | 4 compact planetary transmissions with axial piston motors |
Parking Brakes | Wet multiple-disc brake, spring-loaded/hydraulically released | - | - | Wet multiple disc brake, spring loaded/hydraulically released |
Maximum Swing Speed - Diesel Version | 4.6 r/min | - | 4.7 r/min | - |
Swing Ring | Triple-race roller bearing with sealed internal gearing | Cross roller bearing with sealed internal gearing | Triple-race roller bearing with sealed internal gearing | Triple-race roller bearing with sealed internal gearing |
Maximum Swing Speed - AC Version | 5 r/min | - | - | - |
Parking Brake | - | Wet multiple disc brake, spring-loaded/hydraulically released | Wet multiple disc brake, spring-loaded/hydraulically released | - |
Maximum Swing Speed | - | 4.9 r/min | - | 3.8 r/min |
Features (1) | - | Closed-loop swing circuit with speed control | Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody | Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody |
Features (2) | - | Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking | Closed-loop swing circuit with torque control | Closed-loop swing circuit with torque control |
Features (3) | - | All raceways and the internal gearing of swing ring supplied by automatic central lubrication system | Hydraulic braking of the swing motion by counteracting control | Hydraulic braking of the swing motion by counteracting control |
Features (4) | - | - | All raceways and the internal gearing of swing ring supplied by automatic central lubrication system | All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system |
Undercarriage |
||||
Travel Speed - 1st Stage - Maximum | 0.87 mile/h | - | 0.93 mile/h | 0.68 mile/h |
Travel Speed - 2nd Stage - Maximum | 1.68 mile/h | - | 1.55 mile/h | 0.99 mile/h |
Maximum Tractive Force | 360144 ft·lbf | 197157 lbf | 471260 lb | 661160 lb |
Gradeability - Travel Drives - Approximate | 47 % | - | - | - |
Track Pads - Each Side | 44 | - | 42 | 42 |
Bottom Rollers - Each Side | 7 | - | 7 | 7 |
Support Rollers - Each Side | 2 plus a skid plate in between | - | 2 plus a skid plate in between | 2 plus a skid plate in between |
Travel Drives - Each Side | 1 planetary transmission with 2 two-stage axial piston motors | - | 1 planetary transmission with 2 two-stage axial piston motors | 1 planetary transmission with 2 two-stage axial piston motors |
Parking Brakes | Wet multiple disc brake, spring loaded/hydraulically released | - | - | - |
Components (1) | All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened | Forged double-grouser track pads | All running surfaces of sprockets, idlers, rollers and track links are hardened | HD tracks with cast double-grouser track pad |
Components (2) | Cast double-grouser combined pad-links with bushings connected by hardened full floating pins | Chain links connected by hardened pins and bushings | Acoustic travel alarm | HD fixed axle rollers and idlers |
Components (3) | Fully hydraulic self-adjusting track tensioning system with membrane accumulator | Postive Pin Retention (PPR2) sealed and greased track design | Cast double-grouser combined pad-links with bushings connected by hardened full floating pins | Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas |
Components (4) | Automatic hydraulic retarder valve to prevent over-speed on downhill travel | All running surfaces of sprockets, idlers, rollers and track chain links hardened | All teeth contact areas of sprocket and pad links are hardened | Acoustic travel alarm (forward and reverse) |
Components (5) | Acoustic travel alarm | Fully hydraulic self-adjusting track tensioning system with accumulator | Fully hydraulic self-adjusting track tensioning system with membrane accumulator | Fully hydraulic, self-adjusting track tensioning system with piston accumulator |
Travel Speed - Two Stages - 1st Stage - Maximum | - | 1.6 mile/h | - | - |
Travel Speed - Two Stages - 2nd Stage - Maximum | - | 2.3 mile/h | - | - |
Maximum Drawbar Pull - Forward | - | 192886 lbf | - | - |
Maximum Drawbar Pull - Reverse | - | 220987 lbf | - | - |
Gradeability - Travel Drives | - | 38°/78% (SAE J1309) | - | - |
Hydraulic Track Tensioning | - | With accumulator | - | - |
Number of Shoes - Each Side | - | 46 | - | - |
Number of Track Rollers - Each Side | - | 9 | - | - |
Number of Carrier Rollers - Each Side | - | 3 | - | - |
Components (6) | - | Automatic hydraulic retarder valve to prevent overspeed on downhill travel | Automatic hydraulic retarder valve to prevent over-speed on downhill travel | Automatic hydraulic retarder valve to prevent over-speed on downhill travel |
Components (7) | - | Audible travel alarm | - | - |
Gradeability - Travel Drives - Maximum | - | - | 57 % | 39 % |
Parking Brake | - | - | Wet multiple disc brake, spring applied/hydraulically released | - |
Operator's Cab |
||||
Operator's Eye Level - Approximately | 21.33 ft | - | 22.31 ft | 24.91 ft |
Internal Dimensions of Cab - Length | 7.22 ft | - | 7.22 ft | 7.33 ft |
Internal Dimensions of Cab - Width | 5.25 ft | - | 5.25 ft | 5.33 ft |
Internal Dimensions of Cab - Height | 7.05 ft | - | 7.05 ft | 6.75 ft |
Components (1) | Under roof mounted heating ventilating and air conditioning system | Pressurized operator station with positive filtration | Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat | Single hydraulically driven HVAC System, with dual system option |
Components (2) | External sun shields at side and rear windows | Heated cab mirror | Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests | In-floor window with removable grate |
Components (3) | Robust instrument panel including large colored BCS screen with transflective technology | Sliding upper door window (left-hand cab door) | Roller blinds at all windows | Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support |
Components (4) | Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system | Glass-breaking safety hammer | Windshield with parallel intermittent wiper/washer | Independently adjustable seat consoles with integrated joysticks |
Components (5) | Hydraulically operated 45 degree access stairway | Removable lower windshield with in cab storage bracket | All-round safety glass, armored windshield and sliding side window | Operator Protective Guard (Top Guard) (ISO 10262:1998) |
Components (6) | Emergency egress ladder with ladder cage | Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM | Operator Protective Guard (Top Guard) | Elevated full-size trainer seat with safety belt and laptop desk |
Components (7) | Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat | Beverage holder | Single HVAC with option for Dual HVAC | Additional fold-away auxiliary seat with safety belt |
Components (8) | Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests | Literature holder | Joystick controls integrated in independently adjustable seat consoles | Operator Presence switch |
Components (9) | Roller blinds at all windows | AM/FM radio | Fold-away auxiliary seat with safety belt | Monitoring system with 254 mm (10 in) touch screen |
Components (10) | Windshield with parallel intermittent wiper/washer | Radio with MP3 auxiliary audio port | External sun shields at side and rear windows | Powered 45 degree access stairway |
Components (11) | All-round safety glass, armored windshield and sliding side window | Two stereo speakers | Sliding emergency ladder (kick-down type) with ladder cage | Emergency egress ladder |
Components (12) | Operator Protective Guards (ISO 10262:1998 Level II | Storage shelf suitable for lunch or toolbox | Machine access via retractable access stairway, stairway angle approximately 45 degrees, hydraulically operated | FM/AM radio with USB and AUX input |
Components (13) | Joystick controls integrated in independently adjustable seat consoles | Color LCD display with warning, filter/fluid change, and working hour information | Robust instrument panel including large colored BCS screen with transflective technology | Roller blinds on 3 front windows |
Components (14) | Fold-away auxiliary seat with safety belt | Adjustable armrest | - | 3 cup holders |
Components (15) | - | Height-adjustable joystick consoles | - | Cat Electronic Technician service port |
Components (16) | - | Neutral lever (lock out) for all controls | - | - |
Components (17) | - | Travel control pedals with removable hand levers | - | - |
Components (18) | - | Two power outlets, 10 amp (total) | - | - |
Components (19) | - | Laminated glass front upper window and tempered other windows | - | - |
Board Control System (BCS III) Features (1) | - | - | USB, Lan (TCP/IP) and CAN BUS interfaces for data export | - |
Board Control System (BCS III) Features (2) | - | - | On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram) | - |
Board Control System (BCS III) Features (3) | - | - | Robust instrument panel including large (12 in) colored touch screen for intuitive handling | - |
Board Control System (BCS III) Features (4) | - | - | Electronic monitoring, data logging & diagnostic system for vital signs & service data of engines, hydraulic & lube systems | - |
Board Control System (BCS III) Features (5) | - | - | On-screen troubleshooting assistance | - |
Board Control System (BCS III) Features (6) | - | - | Graphic charts of logged data | - |
Board Control System (BCS III) Features (7) | - | - | Fault memory with storage of related conditions | - |
Automatic Lubrication System |
||||
Capacity - Grease Container | 119 gal (US) | - | 188 gal (US) | 188 gal (US) |
Type (1) | Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times | Central bank lubrication system | Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control adjust the pause/lube times | Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times |
Type (2) | Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders | Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing | System failures displayed by Board Control System | System failures displayed by monitoring system |
Type (3) | Lubricated pinion for greasing of internal gearing of swing ring | Standard grease reel on machine for bucket linkage | Grease filters (200 µm) between service station and container, as well as directly behind grease pump | Grease filters (200 µm) between service station and container as well as directly behind grease pump |
Type (4) | System failures displayed by Board Control System | Grease refill service point accessible from ground | Connected to the lubrication system are: - pivot points of attachment, bucket and cylinders | Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring |
Type (5) | Grease filters between service station and container as well as directly behind grease pump | - | Connected to the lubrication system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring | - |
Capacity - Grease Barrel | - | 18 gal (US) | - | - |
Bucket |
||||
Bucket Capacity - Face Shovel (heaped 2:1) | 21.6 yd³ | - | 28.8 yd³ | - |
Bucket Capacity - Backhoe (heaped 1:1) | 22.2 yd³ | - | 28.8 yd³ | - |
Digging Forces |
||||
Maximum Crowd Force | 291700 ft·lbf | - | - | 494410 lb |
Maximum Tearout Force | 212150 ft·lbf | - | - | - |
Maximum Breakout Force | - | - | - | 388780 lb |
Attachments |
||||
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) | Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces | - | - Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces | Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces |
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) | Horizontal automatic constant-angle bucket guidance and vertical automatic constant-angle bucket guidance | - | - Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance | Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance |
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) | Constant boom momentum throughout the whole lift arc and crowd force assistance | - | - Constant boom momentum throughout the whole lift arc - Crowd force assistance | Constant boom momentum throughout the entire lift arc; Crowd force assistance |
All buckets (FS and BH) are equipped with a wear package consisting of: (1) | Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth | - | - Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth | Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth |
All buckets (FS and BH) are equipped with a wear package consisting of: (2) | Wing shrouds on side walls and heel shrouds at bottom edges | - | - Wing shrouds on side walls - Heel shrouds at bottom edges | Wing shrouds on side walls and heel shrouds at bottom edges |
Type (1) | Catwalks with rails at booms | Boom and stick torsion-resistant with welded box design | Inspection hole in monoboom BH | Catwalks with rails at booms (FS and BH) |
Type (2) | Special wear packages for highly abrasive materials on request | High-tensile steel with solid steel castings at pivot areas | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve | Guards for shovel cylinders (FS) |
Type (3) | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve | Boom and stick stress-relieved after welding | Special wear packages for highly abrasive materials on request | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve |
Type (4) | Welding procedures allow for internal counter-welding (double prep weld) wherever possible | Float valve for boom down function | Catwalks with rails at boom (FS and BH) | Service access holes from both sides of boom (FS and BH) and stick (FS) |
Type (5) | Booms and sticks are stress-relieved after welding | - | Welding procedures allow for internal counter-welding (double prep weld) wherever possible | Welding procedures allow for internal counter-welding (double prep weld) wherever possible |
Type (6) | Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas | - | Boom and sticks are stress-relieved after welding | Booms and sticks are stress-relieved after welding |
Buckets Equipped With | - | – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds | - | - |
Type (7) | - | - | Boom and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel casting at pivot areas | Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas |
Type (8) | - | - | Guards for shovel cylinders (FS) | Special wear packages for highly abrasive materials available upon request |
Engine - U.S. EPA Tier 4 Final |
||||
Engine Model | - | Cat® C27 | - | - |
Gross Power - SAE J1995 | - | 824 HP | - | - |
Net Power - SAE J1349 | - | 746 HP | - | - |
Engine - Cat C27 with Tier 4 Final Emission Standards |
||||
Number of Cylinders | - | 12 | - | - |
Bore | - | 5.4 in | - | - |
Stroke | - | 6 in | - | - |
Displacement | - | 1648 in³ | - | - |
Engine - Equivalent to U.S. EPA Tier 2 |
||||
Engine Model | - | Cat® C27 | - | - |
Gross Power - SAE J1995 | - | 839 HP | - | - |
Net Power - SAE J1349 | - | 746 HP | - | - |
Engine - Cat C27 with Tier 1 or Tier 2 Equivalent Emission Standards |
||||
Number of Cylinders | - | 12 | - | - |
Bore | - | 5.4 in | - | - |
Stroke | - | 6 in | - | - |
Displacement | - | 1648 in³ | - | - |
Aspiration | - | Turbocharged and air-to-air aftercooled | - | - |
Operating Weights - Backhoe |
||||
Operating Weight | - | 154 ton (US) | - | - |
Weights |
||||
Ground Pressure | - | 23.6 psi | - | - |
Note | - | Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants | - | - |
Operating Weight | - | 308000 lb | - | - |
Track |
||||
Standard | - | 28 in | - | - |
Wide | - | 36 in | - | - |
Extra Wide | - | 39 in | - | - |
Number of Shoes - Each Side | - | 46 | - | - |
Number of Track Rollers - Each Side | - | 9 | - | - |
Number of Carrier Rollers - Each Side | - | 3 | - | - |
Track Pads | - | Double grouser | - | - |
Drive |
||||
Travel Speed - Two Stages - 1st Stage - Maximum | - | 1.4 mile/h | - | - |
Travel Speed - Two Stages - 2nd Stage - Maximum | - | 2.1 mile/h | - | - |
Maximum Drawbar Pull - Forward | - | 192886 lbf | - | - |
Maximum Drawbar Pull - Reverse | - | 220987 lbf | - | - |
Gradeability - Travel Drives | - | Approximately 42% | - | - |
Hydraulic Track Tensioning | - | With accumulator | - | - |
Maximum Drawbar Pull | - | 179847 lbf | - | - |
Service Refill Capacities |
||||
Fuel Tank | - | 449 gal (US) | - | 3136 gal (US) |
Cooling System | - | 44 gal (US) | - | 211.4 gal (US) |
Engine Oil | - | 23 gal (US) | - | 86.6 gal (US) |
Swing Drive | - | 2.4 gal (US) | - | 42.4 gal (US) |
Hydraulic System - Including Tank | - | 463 gal (US) | - | 2483 gal (US) |
Hydraulic Tank | - | 253 gal (US) | - | 1876 gal (US) |
Grease Tank | - | 18 gal (US) | - | 188 gal (US) |
Hydraulic System |
||||
Main Pumps | - | 3 × variable swash plate pumps | - | - |
Main Pumps - Maximum Total Oil Flow | - | 407 gal/min | - | - |
Main Pumps - Maximum Pressure - Attachment | - | 4641 psi | - | - |
Pilot Pump | - | 1 × gear pump | - | - |
Pilot Pump - Maximum Flow, Pilot | - | 40.4 gal/min | - | - |
Pilot Pump - Maximum Pressure, Pilot | - | 1378 psi | - | - |
Main Pumps - Maximum Pressure - Travel | - | 4641 psi | - | - |
Swing Pump | - | 1 × variable swash plate pump | - | - |
Engine Fan Pump - Maximum Flow, Engine Fan | - | 53.1 gal/min | - | - |
Engine Fan Pump - Maximum Pressure, Engine Fan | - | 3191 psi | - | - |
Engine Fan Pump | - | 1 × variable swash plate pump | - | - |
Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan | - | 22.7 gal/min | - | - |
Swing Pump - Maximum Flow - Swing | - | 127 gal/min | - | - |
Hydraulic Fan Pump | - | 1 × variable swash plate pump | - | - |
Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan | - | 1958 psi | - | - |
Swing Pump - Maximum Pressure - Swing | - | 5294 psi | - | - |
Hydraulic Oil Cooling - Maximum Flow | - | 284 gal/min | - | - |
Hydraulic Oil Cooling - Diameter of Fan | - | 40 in | - | - |
Filters (1) | - | Full-flow high-pressure filters (200 μm) for main pumps | - | - |
Filters (2) | - | Full-flow filters (20 μm) for complete return circuit | - | - |
Filters (3) | - | Pressure filters (16 μm) for servo circuit | - | - |
Filters (4) | - | Full-flow filters (6 μm) for engine cooling return circuit | - | - |
Filters (5) | - | Swing charge filter (15 μm) | - | - |
Filters (6) | - | Pump case return screens (125 μm) | - | - |
Engine |
||||
Emissions | - | U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1 | - | - |
Engine Model | - | - | 2 x Cat C32 | 2 x Cat 3512E |
Gross Power - SAE J1995 | - | - | 2079 HP | - |
Net Power - SAE J1349 | - | - | 1915 HP | - |
Note | - | - | Power output relates to highly regulated engines. Lesser regulated engines are also available. | - |
Centralized Service Area |
||||
Feature | - | Accessible from ground level | - | - |
Equipped With (1) | - | Emergency stop | - | - |
Equipped With (2) | - | Quick couplings for: Diesel fuel and Grease | - | - |
Backhoe Attachment (BH) - Working Range |
||||
Maximum Digging Depth | - | 26.3 ft | - | 29.17 ft |
Maximum Digging Reach | - | 45.6 ft | - | 62.33 ft |
Maximum Digging Height | - | 41.9 ft | - | 52.83 ft |
Maximum Dump Height | - | 27.9 ft | - | - |
Backhoe Attachment (BH) - Digging Forces |
||||
Bucket Digging Force - ISO | - | 120947 lbf | - | 274840 lb |
Bucket Digging Force - SAE | - | 112600 lbf | - | - |
Stick Digging Force - ISO | - | 104761 lbf | - | 295740 lb |
Stick Digging Force - SAE | - | 98800 lbf | - | - |
Backhoe Attachment (BH) - Backhoe |
||||
Capacity 1:1 | - | 10.6 yd³ | - | - |
Total Width | - | 8.8 ft | - | - |
Number of Teeth | - | 5 | - | - |
Tooth System | - | Cat C70 or M75 | - | - |
Weight - Including Standard Wear Package | - | 18521 lb | - | - |
Maximum Material Density - Loose | - | 3030 lb/yd³ | - | - |
Retractable Service Station |
||||
Installation | - | - | Retractable service station installed underneath the engine module and easily accessible from ground | Retractable service station installed underneath the engine module and easily accessible from ground. |
Equipped With (1) | - | - | - | Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container |
Equipped With (2) | - | - | - | Cat jump-start socket |
Equipped With (3) | - | - | - | Indicator lights |
Working Ranges |
||||
Maximum Digging Height | - | - | - | 51.17 ft |
Maximum Digging Reach | - | - | - | 54.17 ft |
Maximum Digging Depth | - | - | - | 9.17 ft |
Standard Bucket Capacity |
||||
Face Shovel (heaped 2:1) | - | - | - | 44.5 yd³ |
Backhoe (heaped 1:1) | - | - | - | 44.5 yd³ |
Add a Similar Product:
- 6020B Hydraulic Shovel Add