CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    6015 Hydraulic Shovel
    View Product
    6060 Hydraulic Mining Shovel
    View Product Remove
    6030 Hydraulic Shovel
    View Product Remove

    General
    Engine Output - SAE J1995 824 HP 3015 HP 1649 HP
    Bucket Payload 16.1 ton (US) 67 ton (US) 33 ton (US)
    Operating Weight 154.3 ton (US) 660 ton (US) 324 ton (US)
    Note Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available. Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available. Specifications shown above apply to the highly regulated Face Shovel configuration. Backhoe and Frontless configurations are also available for all regions.

    Engine - U.S. EPA Tier 4 Final
    Engine Model Cat® C27 - -
    Gross Power - SAE J1995 824 HP - -
    Net Power - SAE J1349 746 HP - -

    Engine - Cat C27 with Tier 4 Final Emission Standards
    Number of Cylinders 12 - -
    Bore 5.4 in - -
    Stroke 6 in - -
    Displacement 1648 in³ - -

    Engine - Equivalent to U.S. EPA Tier 2
    Engine Model Cat® C27 - -
    Gross Power - SAE J1995 839 HP - -
    Net Power - SAE J1349 746 HP - -

    Engine - Cat C27 with Tier 1 or Tier 2 Equivalent Emission Standards
    Number of Cylinders 12 - -
    Bore 5.4 in - -
    Stroke 6 in - -
    Displacement 1648 in³ - -
    Aspiration Turbocharged and air-to-air aftercooled - -

    Operating Weights - Backhoe
    Operating Weight 154 ton (US) - -

    Weights
    Ground Pressure 23.6 psi - -
    Note Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants - -
    Operating Weight 308000 lb - -

    Track
    Standard 28 in - -
    Wide 36 in - -
    Extra Wide 39 in - -
    Number of Shoes - Each Side 46 - -
    Number of Track Rollers - Each Side 9 - -
    Number of Carrier Rollers - Each Side 3 - -
    Track Pads Double grouser - -

    Drive
    Travel Speed - Two Stages - 1st Stage - Maximum 1.4 mile/h - -
    Travel Speed - Two Stages - 2nd Stage - Maximum 2.1 mile/h - -
    Maximum Drawbar Pull - Forward 192886 lbf - -
    Maximum Drawbar Pull - Reverse 220987 lbf - -
    Gradeability - Travel Drives Approximately 42% - -
    Hydraulic Track Tensioning With accumulator - -
    Maximum Drawbar Pull 179847 lbf - -

    Service Refill Capacities
    Fuel Tank 449 gal (US) 3136 gal (US) -
    Cooling System 44 gal (US) 211.4 gal (US) -
    Engine Oil 23 gal (US) 86.6 gal (US) -
    Swing Drive 2.4 gal (US) 42.4 gal (US) -
    Hydraulic System - Including Tank 463 gal (US) 2483 gal (US) -
    Hydraulic Tank 253 gal (US) 1876 gal (US) -
    Grease Tank 18 gal (US) 188 gal (US) -

    Electrical System
    System Voltage 24 V 24 V -
    Batteries 4 × 200 Ah (12 V each) - 4 maintenance-free batteries
    Alternator Rating 150 A (24 V) in total - -
    Components (1) Emergency stop in cabin, engine module, pump room and on service station accessible from ground level 6 maintenance-free batteries -
    Components (2) Four maintenance free batteries Lockable battery isolator switch -
    Components (3) Lockable battery isolation switch Lockable starter isolator switch -
    Components (5) 14 LED high-brightness working lights 17 LED service lights -
    Components (4) 5 LED service lights 13 LED high-brightness working flood lights -
    Components (6) 2 electric horns 2 electric horns (1 cab module; 1 oil cooler module) -
    Components (7) Two (2) lights for rear end - -
    Components (9) One (1) beacon light on cabin roof - -
    Components (8) One (1) light for machine deck/service - -
    Batteries in Series/Parallel Installation - 6 x 210 Ah; 12 V each; 630 Ah 24 V in total -

    Hydraulic System
    Main Pumps 3 × variable swash plate pumps - -
    Main Pumps - Maximum Total Oil Flow 407 gal/min - -
    Main Pumps - Maximum Pressure - Attachment 4641 psi - -
    Pilot Pump 1 × gear pump - -
    Pilot Pump - Maximum Flow, Pilot 40.4 gal/min - -
    Pilot Pump - Maximum Pressure, Pilot 1378 psi - -
    Main Pumps - Maximum Pressure - Travel 4641 psi - -
    Swing Pump 1 × variable swash plate pump - -
    Engine Fan Pump - Maximum Flow, Engine Fan 53.1 gal/min - -
    Engine Fan Pump - Maximum Pressure, Engine Fan 3191 psi - -
    Engine Fan Pump 1 × variable swash plate pump - -
    Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan 22.7 gal/min - -
    Swing Pump - Maximum Flow - Swing 127 gal/min - -
    Hydraulic Fan Pump 1 × variable swash plate pump - -
    Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan 1958 psi - -
    Swing Pump - Maximum Pressure - Swing 5294 psi - -
    Hydraulic Oil Cooling - Maximum Flow 284 gal/min - -
    Hydraulic Oil Cooling - Diameter of Fan 40 in - -
    Filters (1) Full-flow high-pressure filters (200 μm) for main pumps - -
    Filters (2) Full-flow filters (20 μm) for complete return circuit - -
    Filters (3) Pressure filters (16 μm) for servo circuit - -
    Filters (4) Full-flow filters (6 μm) for engine cooling return circuit - -
    Filters (5) Swing charge filter (15 μm) - -
    Filters (6) Pump case return screens (125 μm) - -

    Swing System
    Swing Drive Two (2) compact planetary transmissions with axial piston motors 4 compact planetary transmissions with axial piston motors 2 compact planetary transmissions with axial piston motors
    Parking Brake Wet multiple disc brake, spring-loaded/hydraulically released - -
    Maximum Swing Speed 4.9 r/min 3.8 r/min -
    Swing Ring Cross roller bearing with sealed internal gearing Triple-race roller bearing with sealed internal gearing Triple-race roller bearing with sealed internal gearing
    Features (1) Closed-loop swing circuit with speed control Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody -
    Features (2) Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking Closed-loop swing circuit with torque control -
    Features (3) All raceways and the internal gearing of swing ring supplied by automatic central lubrication system Hydraulic braking of the swing motion by counteracting control -
    Parking Brakes - Wet multiple disc brake, spring loaded/hydraulically released Wet multiple-disc brake, spring-loaded/hydraulically released
    Features (4) - All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system -
    Maximum Swing Speed - Diesel Version - - 4.6 r/min
    Maximum Swing Speed - AC Version - - 5 r/min

    Engine
    Emissions U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1 - -
    Engine Model - 2 x Cat 3512E -

    Centralized Service Area
    Feature Accessible from ground level - -
    Equipped With (1) Emergency stop - -
    Equipped With (2) Quick couplings for: Diesel fuel and Grease - -

    Undercarriage
    Travel Speed - Two Stages - 1st Stage - Maximum 1.6 mile/h - -
    Travel Speed - Two Stages - 2nd Stage - Maximum 2.3 mile/h - -
    Maximum Drawbar Pull - Forward 192886 lbf - -
    Maximum Tractive Force 197157 lbf 661160 lb 360144 ft·lbf
    Maximum Drawbar Pull - Reverse 220987 lbf - -
    Gradeability - Travel Drives 38°/78% (SAE J1309) - -
    Hydraulic Track Tensioning With accumulator - -
    Number of Shoes - Each Side 46 - -
    Number of Track Rollers - Each Side 9 - -
    Number of Carrier Rollers - Each Side 3 - -
    Components (1) Forged double-grouser track pads HD tracks with cast double-grouser track pad All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
    Components (2) Chain links connected by hardened pins and bushings HD fixed axle rollers and idlers Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
    Components (3) Postive Pin Retention (PPR2) sealed and greased track design Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas Fully hydraulic self-adjusting track tensioning system with membrane accumulator
    Components (4) All running surfaces of sprockets, idlers, rollers and track chain links hardened Acoustic travel alarm (forward and reverse) Automatic hydraulic retarder valve to prevent over-speed on downhill travel
    Components (5) Fully hydraulic self-adjusting track tensioning system with accumulator Fully hydraulic, self-adjusting track tensioning system with piston accumulator Acoustic travel alarm
    Components (6) Automatic hydraulic retarder valve to prevent overspeed on downhill travel Automatic hydraulic retarder valve to prevent over-speed on downhill travel -
    Components (7) Audible travel alarm - -
    Travel Speed - 1st Stage - Maximum - 0.68 mile/h 0.87 mile/h
    Travel Speed - 2nd Stage - Maximum - 0.99 mile/h 1.68 mile/h
    Gradeability - Travel Drives - Maximum - 39 % -
    Track Pads - Each Side - 42 44
    Bottom Rollers - Each Side - 7 7
    Support Rollers - Each Side - 2 plus a skid plate in between 2 plus a skid plate in between
    Travel Drives - Each Side - 1 planetary transmission with 2 two-stage axial piston motors 1 planetary transmission with 2 two-stage axial piston motors
    Gradeability - Travel Drives - Approximate - - 47 %
    Parking Brakes - - Wet multiple disc brake, spring loaded/hydraulically released

    Operator's Cab
    Components (1) Pressurized operator station with positive filtration Single hydraulically driven HVAC System, with dual system option Under roof mounted heating ventilating and air conditioning system
    Components (2) Heated cab mirror In-floor window with removable grate External sun shields at side and rear windows
    Components (3) Sliding upper door window (left-hand cab door) Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support Robust instrument panel including large colored BCS screen with transflective technology
    Components (4) Glass-breaking safety hammer Independently adjustable seat consoles with integrated joysticks Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system
    Components (5) Removable lower windshield with in cab storage bracket Operator Protective Guard (Top Guard) (ISO 10262:1998) Hydraulically operated 45 degree access stairway
    Components (6) Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM Elevated full-size trainer seat with safety belt and laptop desk Emergency egress ladder with ladder cage
    Components (7) Beverage holder Additional fold-away auxiliary seat with safety belt Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
    Components (8) Literature holder Operator Presence switch Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
    Components (9) AM/FM radio Monitoring system with 254 mm (10 in) touch screen Roller blinds at all windows
    Components (10) Radio with MP3 auxiliary audio port Powered 45 degree access stairway Windshield with parallel intermittent wiper/washer
    Components (11) Two stereo speakers Emergency egress ladder All-round safety glass, armored windshield and sliding side window
    Components (12) Storage shelf suitable for lunch or toolbox FM/AM radio with USB and AUX input Operator Protective Guards (ISO 10262:1998 Level II
    Components (13) Color LCD display with warning, filter/fluid change, and working hour information Roller blinds on 3 front windows Joystick controls integrated in independently adjustable seat consoles
    Components (14) Adjustable armrest 3 cup holders Fold-away auxiliary seat with safety belt
    Components (15) Height-adjustable joystick consoles Cat Electronic Technician service port -
    Components (16) Neutral lever (lock out) for all controls - -
    Components (17) Travel control pedals with removable hand levers - -
    Components (18) Two power outlets, 10 amp (total) - -
    Components (19) Laminated glass front upper window and tempered other windows - -
    Operator's Eye Level - Approximately - 24.91 ft 21.33 ft
    Internal Dimensions of Cab - Length - 7.33 ft 7.22 ft
    Internal Dimensions of Cab - Width - 5.33 ft 5.25 ft
    Internal Dimensions of Cab - Height - 6.75 ft 7.05 ft

    Automatic Lubrication System
    Capacity - Grease Barrel 18 gal (US) - -
    Type (1) Central bank lubrication system Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
    Type (2) Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing System failures displayed by monitoring system Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders
    Type (3) Standard grease reel on machine for bucket linkage Grease filters (200 µm) between service station and container as well as directly behind grease pump Lubricated pinion for greasing of internal gearing of swing ring
    Type (4) Grease refill service point accessible from ground Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring System failures displayed by Board Control System
    Capacity - Grease Container - 188 gal (US) 119 gal (US)
    Type (5) - - Grease filters between service station and container as well as directly behind grease pump

    Attachments
    Type (1) Boom and stick torsion-resistant with welded box design Catwalks with rails at booms (FS and BH) Catwalks with rails at booms
    Type (2) High-tensile steel with solid steel castings at pivot areas Guards for shovel cylinders (FS) Special wear packages for highly abrasive materials on request
    Type (3) Boom and stick stress-relieved after welding Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
    Type (4) Float valve for boom down function Service access holes from both sides of boom (FS and BH) and stick (FS) Welding procedures allow for internal counter-welding (double prep weld) wherever possible
    Buckets Equipped With – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds - -
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) - Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) - Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance Horizontal automatic constant-angle bucket guidance and vertical automatic constant-angle bucket guidance
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) - Constant boom momentum throughout the entire lift arc; Crowd force assistance Constant boom momentum throughout the whole lift arc and crowd force assistance
    All buckets (FS and BH) are equipped with a wear package consisting of: (1) - Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
    All buckets (FS and BH) are equipped with a wear package consisting of: (2) - Wing shrouds on side walls and heel shrouds at bottom edges Wing shrouds on side walls and heel shrouds at bottom edges
    Type (5) - Welding procedures allow for internal counter-welding (double prep weld) wherever possible Booms and sticks are stress-relieved after welding
    Type (6) - Booms and sticks are stress-relieved after welding Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas
    Type (7) - Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas -
    Type (8) - Special wear packages for highly abrasive materials available upon request -

    Backhoe Attachment (BH) - Working Range
    Maximum Digging Depth 26.3 ft 29.17 ft -
    Maximum Digging Reach 45.6 ft 62.33 ft -
    Maximum Digging Height 41.9 ft 52.83 ft -
    Maximum Dump Height 27.9 ft - -

    Backhoe Attachment (BH) - Digging Forces
    Bucket Digging Force - ISO 120947 lbf 274840 lb -
    Bucket Digging Force - SAE 112600 lbf - -
    Stick Digging Force - ISO 104761 lbf 295740 lb -
    Stick Digging Force - SAE 98800 lbf - -

    Backhoe Attachment (BH) - Backhoe
    Capacity 1:1 10.6 yd³ - -
    Total Width 8.8 ft - -
    Number of Teeth 5 - -
    Tooth System Cat C70 or M75 - -
    Weight - Including Standard Wear Package 18521 lb - -
    Maximum Material Density - Loose 3030 lb/yd³ - -

    Diesel Engines
    Rated Speed - 1,800 min-1 (1,800 rpm) -
    Number of Cylinders - Each Engine - 12 12
    Bore - 6.69 in 5.42 in
    Stroke - 8.46 in 6 in
    Displacement - 3574 in³ 1648 in³
    Aspiration - Turbocharged and charge air-cooled Turbocharged and air-to-air aftercooled
    Components (1) - Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs) Hydraulically driven radiator fan with electronically controlled fan speed
    Components (2) - High-capacity water separator Micro processed engine management
    Components (3) - Two-stage fuel filter with series filtration Heavy-duty air filters
    Components (4) - Heavy-duty air filters Two-stage fuel filter, including water separator
    Components (5) - Microprocessed engine management Additional high-capacity water separator
    Components (6) - Hydraulically driven radiator fan with electronically controlled fan speed -
    Components (7) - Exhaust manifold and turbo heat shields -
    Emissions - - Meets U.S. EPA Tier 4 Final and EU Stage V emission standards
    Fuel Tank Capacity - - 1342 gal (US)

    Diesel Engine - Lesser Regulated
    Gross Power - SAE J1995 - 3025 HP 1531 HP
    Net Power - ISO 9249 - 2990 HP 1511 HP
    Net Power - SAE J1349 - 2821 HP 1425 HP
    Emissions - Optimized for fuel consumption. Meets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 2

    Diesel Engine - Highly Regulated
    Gross Power - SAE J1995 - 3015 HP 1649 HP
    Net Power - SAE J1349 - 2810 HP 1541 HP
    Net Power - ISO 9249 - 2979 HP 1625 HP
    Emissions - Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions. Meets U.S. EPA Tier 4 Final and EU Stage V emission standards

    Operating Weights
    6060 FS - Standard Track Pads - 4.58 ft -
    6060 FS - Operating Weight - 1320110 lb -
    6060 FS - Ground Pressure - 26.6 N/cm2 (38.5 psi) -
    Backhoe - Standard Track Pads - 4.58 ft -
    Backhoe - Operating Weight - 1323860 lb -
    Backhoe - Ground Pressure - 26.7 N/cm2 (38.7 psi) -
    Note - Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants. Other track pads available on request. Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and 100% fuel and lubricants.
    6030 FS - Standard Track Pads - - 3.25 ft
    6030 FS - Operating Weight - - 657640 lb
    6030 FS - Ground Pressure - - 32.2 psi
    6030 - Standard Track Pads - - 3.25 ft
    6030 - Operating Weight - - 660060 lb
    6030 - Ground Pressure - - 32.3 psi

    Hydraulic System with Pump Managing System
    Main Pumps - Diesel Version - 8 variable swash plate pumps -
    Main Pumps - Maximum Oil Flow - Diesel Version - 8 x 650 L/min (8 x 172 gal/min) 4 x 552 L/min (4 x 146 gal/min)
    Maximum Pressure - Attachment - 4640 psi 4495 psi
    Maximum Pressure - Travel - 5220 psi 5220 psi
    Swing Pumps - Diesel Version - 4 reversible swash plate pumps -
    Swing Pumps - Maximum Oil Flow - Diesel Version - 4 x 352 L/min (4 x 93 gal/min) 4 x 197 L/min (4 x 52 gal/min)
    Maximum Pressure - Swing Pumps - 5075 psi 5076 psi
    Hydraulic Tank Capacity - Approximately - - 707 gal (US)
    Total Volume of Hydraulic Oil - Approximately - - 925 gal (US)
    Main Pumps - - 4 x variable swash plate pumps
    Swing Pumps - - 2 x reversible swash plate double pumps

    Hydraulic Oil Cooling
    Oil Flow of Cooling Pumps - 4 x 488 L/min (4 x 129 gal/min) -
    Components - 4 cooling fans -
    Diameter - Fan - 46 in 48 in
    Features (1) - Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running -
    Features (2) - Fan speed and flow of oil to the coolers are thermostatically controlled -
    Features (3) - Extremely high cooling efficiency to ensure optimum oil temperature -
    Features (4) - Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers -
    Oil Flow of Cooling Pumps - Diesel Version - - 2 x 467 L/min (2 x 123 gal/min)

    Digging Forces
    Maximum Crowd Force - 494410 lb 291700 ft·lbf
    Maximum Breakout Force - 388780 lb -
    Maximum Tearout Force - - 212150 ft·lbf

    Working Ranges
    Maximum Digging Height - 51.17 ft -
    Maximum Digging Reach - 54.17 ft -
    Maximum Digging Depth - 9.17 ft -

    Standard Bucket Capacity
    Face Shovel (heaped 2:1) - 44.5 yd³ -
    Backhoe (heaped 1:1) - 44.5 yd³ -

    Retractable Service Station
    Installation - Retractable service station installed underneath the engine module and easily accessible from ground. -
    Equipped With (1) - Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container -
    Equipped With (2) - Cat jump-start socket -
    Equipped With (3) - Indicator lights -

    Electrical System - Diesel Drive
    System Voltage - - 24V
    Batteries in Series/Parallel Installation - - 4 x 210 Ah at 12V each; 420 Ah with 24V in total
    Components (1) - - Battery isolation relays
    Components (2) - - Emergency stop switches accessible from ground level and in engine module
    Components (3) - - 14 LED high-brightness working flood lights
    Components (4) - - 11 LED service lights

    Bucket
    Bucket Capacity - Face Shovel (heaped 2:1) - - 21.6 yd³
    Bucket Capacity - Backhoe (heaped 1:1) - - 22.2 yd³
    Add a Similar Product:
    • 6040 Hydraulic Mining Shovel Add
    • 6020B Hydraulic Shovel Add