Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
-
-
Operating Specifications - Tier 4 Final/EU Stage V
Operating Weight
48526 lb
-
-
Scoops
Chip Scoop Doze Capacity
37.9 yd³
-
-
Chip Scoop Carry Capacity
19 yd³
-
-
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Engine Model
Cat C7.1
-
-
Emissions
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
-
-
Rated Speed
2200 r/min
-
-
Net Power (SAE J1349:2011)
249 HP
-
-
Gross Power (SAE J1995:2014)
286 HP
-
-
Engine Power (ISO 14396:2002)
275 HP
-
-
Peak Torque - 1,400 rpm
749 lb/ft
-
-
Torque Rise
26%
-
-
Bore
4.1 in
-
-
Stroke
5.3 in
-
-
Displacement
427.8 in³
-
-
High Idle Speed
2270 r/min
-
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Operating Weight
47887 lb
-
-
Operating Specifications - Tier 4 Final/EU Stage V - Scoop
Operating Weight
52280 lb
-
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
Operating Weight
51639 lb
-
-
Transmission
Transmission Type
Cat Planetary Power Shift
-
-
Forward - 1
3.7 mile/h
-
-
Forward - 2
6.5 mile/h
-
-
Forward - 3
11.2 mile/h
-
-
Forward - 4
19.4 mile/h
-
-
Reverse - 1
4.2 mile/h
-
-
Reverse - 2
7.3 mile/h
-
-
Reverse - 3
12.8 mile/h
-
-
Reverse - 4
22.1 mile/h
-
-
1.0 Forward
-
2.5 mile/h
-
1.5 Forward
-
3.4 mile/h
-
2.0 Forward
-
4.5 mile/h
-
2.5 Forward
-
6 mile/h
-
3.0 Forward
-
7.8 mile/h
-
1.0 Reverse
-
3.2 mile/h
-
1.5 Reverse
-
4.2 mile/h
-
2.0 Reverse
-
5.6 mile/h
-
2.5 Reverse
-
7.5 mile/h
-
3.0 Reverse
-
9.8 mile/h
-
Transmission Clutch Diameter
-
17 in
-
Type
-
Planetary powershift
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Pilot operated LS valve with EH
-
-
Lift/Tilt System
Variable displacement piston
-
-
Maximum Flow at 2,200 rpm
23.5 gal/min
-
-
Relief Valve Setting - Lift/Tilt
3190 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 915 mm (4.7 in × 36.0 in)
-
-
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke
101.6 mm × 234 mm (4.0 in × 9.2 in)
-
-
Pilot System
Open center, fixed displacement gear
-
-
Pilot Relief Valve Setting
3046 psi
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
-
-
Steering System - Pump
Variable displacement piston
-
-
Maximum Flow at 2,200 rpm
38.8 gal/min
-
-
Relief Valve Setting - Steering
4003 psi
-
-
Total Steering Angle
72°
-
-
Steering Cycle Times - High Idle
3 s
-
-
Steering Cycle Times - Low Idle
8.2 s
-
-
Service Refill Capacities
Fuel Tank
132.1 gal (US)
-
-
Diesel Exhaust Fluid Tank
4.2 gal (US)
-
-
Cooling Systems - Tier 4 Final/EU Stage V
21.4 gal (US)
-
-
Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA
19.3 gal (US)
-
-
Engine Crankcase
5.3 gal (US)
-
-
Transmission
13.2 gal (US)
-
-
Differential - Final Drives - Front
17.2 gal (US)
-
-
Differential - Final Drives - Rear
17.2 gal (US)
-
-
Hydraulic System - Implement/Steering
34.1 gal (US)
-
-
Hydraulic Tank Only
19.8 gal (US)
-
-
Axles
Front
Planetary – Fixed
-
-
Rear
Planetary – Oscillating
-
-
Oscillation Angle
±10°
-
-
Braking System
Service Brakes
Single Disc Wet (enclosed) 4 WHL
-
-
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
-
-
Dimensions (Approximate)
Height to Top of Beacon
13.1 ft
-
-
Height - Top of Cab
12.1 ft
-
-
Height - Top of Exhaust Pipe
11.3 ft
-
-
Height - Top of Hood
8.7 ft
-
-
Height to Top of Radiator Guard
8 ft
-
-
Ground Clearance to Hitch
1.4 ft
-
-
Ground Clearance to Transmission Guard
1.4 ft
-
-
Ground Clearance to Bottom of Bumper
2.3 ft
-
-
Centerline of Rear Axle to Bumper
6.5 ft
-
-
Centerline of Front Axle to Hitch
5.5 ft
-
-
Wheel Base
11 ft
-
-
Width over Platform
10.3 ft
-
-
Overall Length to Front Tire
21 ft
-
-
Overall Machine Length with Straight Blade
23.6 ft
-
-
Overall Machine Length with Coal Blade
25.5 ft
-
-
Ground Clearance*
-
28.5 in
-
Track Gauge
-
100.4 in
-
Width - Without Trunnions - 610 mm/24 in ES
-
130.4 in
-
Width - Over Trunnions
-
148 in
-
Height - FOPS Cab*
-
162.8 in
-
Height - Top of Stack*
-
171.5 in
-
Height - ROPS/Canopy*
-
173.5 in
-
Note (1)
-
*Includes grouser height for total dimensions on hard surfaces.
-
Length - Track on Ground
-
152.8 in
-
Overall Length - Basic Tractor
-
209.6 in
-
Length - With SU-Blade
-
292 in
-
Length - With U-Blade
-
305.1 in
-
Length - With Single-Shank Ripper
-
278.8 in
-
Length - With Multi-Shank Ripper
-
285.1 in
-
Overall Length - SU-Blade/SS Ripper
-
360.6 in
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
111 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A)
-
-
Sound Performance - Tier 4 Final/EU Stage V - Suppression
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
109 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
112 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
110 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model
-
Cat® C27
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
-
602 HP
-
Engine Power - Gross SAE J1995* - Forward
-
631 HP
-
Engine Power - Gross SAE J1995* - Reverse
-
766 HP
-
Engine Power - ISO 14396* - Forward
-
620 HP
-
Engine Power - ISO 14396* - Reverse
-
754 HP
-
Engine Power - Net SAE J1349/ISO 9249** - Reverse
-
722 HP
-
Displacement
-
1648 in³
-
Stroke
-
6 in
-
Bore
-
5.4 in
-
Emissions
-
U.S. EPA Tier 4 Final/EU Stage V
-
Note (1)
-
*Excludes all fan losses.
-
Note (2)
-
All Engine ratings apply at 1,800 rpm.
-
Note (3)
-
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
Note (4)
-
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
Note (5)
-
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
Weights
Operating Weight
-
154888 lb
-
Shipping Weight
-
111739 lb
-
Note (1)
-
D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
Note (2)
-
D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
-
Undercarriage
Shoe Type
-
Extreme Service (ES)
-
Width - Shoe
-
24 in
-
Shoes/Side
-
44
-
Grouser Height
-
3.7 in
-
Pitch
-
10.2 in
-
Ground Clearance
-
28.5 in
-
Track Gauge
-
100.4 in
-
Length - Track on Ground
-
152.8 in
-
Ground Contact Area
-
7347 in²
-
Track Rollers/Side
-
8
-
Number of Carrier Rollers
-
1 per side (optional)
-
Standards
ROPS
-
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
-
FOPS
-
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
-
Sound
-
Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
-
Note
-
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and
-
Sound (1)
-
Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
-
Note (1)
-
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine
cooling fan speeds.
-
Note (2)
-
The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
-
Note (3)
-
The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.
-
Blades
10SU ABR - Capacity (SAE J1265)
-
24.2 yd³
-
10SU ABR - Width (over end bits)
-
194.5 in
-
10SU ABR - Height
-
83.5 in
-
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
-
19.98 in
-
10SU ABR - Digging Depth - Blade Pitch: Nominal
-
25.23 in
-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
-
30.08 in³
-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
-
66.14 in
-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
-
53.86 in
-
10SU ABR - Ground Clearance - Maximum Tilt LH
-
56.3 in
-
10SU ABR - Ground Clearance - Maximum Tilt RH
-
56.3 in
-
10U ABR - Capacity (SAE J1265)
-
28.7 yd³
-
10U ABR - Width (over end bits)
-
207.1 in
-
10U ABR - Height
-
83.5 in
-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
-
19.98 in
-
10U ABR - Digging Depth - Blade Pitch: Nominal
-
60 in
-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
-
30.1 in
-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
-
66.1 in
-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
-
53.9 in
-
10U ABR - Ground Clearance - Maximum Tilt LH
-
60.8 in
-
10U ABR - Ground Clearance - Maximum Tilt RH
-
60.8 in
-
10U ABR - Weights - Blade Weight*
-
23585 lb
-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)
-
154888 lb
-
Note (1)
-
Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
-
Note (2)
-
*Does not include hydraulic controls but includes blade cylinders, pusharms.
-
Note (3)
-
**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
-
49233 lbf
-
Maximum penetration depth (standard tip)
-
59.2 in
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
36 in
-
Weight
-
14209 lb
-
Note
-
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
-
53055 lbf
-
Maximum penetration depth (standard tip)
-
78.3 in
-
Weight
-
14548 lb
-
Note
-
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model
-
Cat® C27
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
-
603 HP
-
Engine Power - Net SAE J1349/ISO 9249** - Reverse
-
722 HP
-
Engine Power - Gross SAE J1995* - Forward
-
631 HP
-
Engine Power - Gross SAE J1995* - Reverse
-
766 HP
-
Engine Power - ISO 14396* - Forward
-
622 HP
-
Engine Power - ISO 14396* - Reverse
-
756 HP
-
Displacement
-
1648 in³
-
Bore
-
5.4 in
-
Stroke
-
6 in
-
Emissions
-
U.S. EPA Tier 2 Equivalent
-
Note (1)
-
*Excludes all fan losses.
-
Note (2)
-
All Engine ratings apply at 1,800 rpm.
-
Note (3)
-
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
Note (4)
-
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
Note (5)
-
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
Fuel Tank Capacities
Fuel Tank - Usable Volume
-
323.3 gal (US)
-
Fuel Tank - Total Volume
-
335.2 gal (US)
-
Hydraulic Controls
Pump Type
-
Variable displacement piston
-
Pump Output - Implement
-
112 gal/min
-
Note (1)
-
Implement Pump output measured are 2,010 engine rpm and
7000 kPa (1,015 psi).
-
Fan Pump
-
21.7 gal/min
-
Note (2)
-
Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
-
Tilt Cylinder Flow - Rod End Flow
-
112 gal/min
-
Tilt Cylinder Flow - Head End Flow
-
63.4 gal/min
-
Lift Cylinder Relief Valve Setting
-
4061.1 psi
-
Tilt Cylinder Relief Valve Setting
-
3872.5 psi
-
Ripper - Lift - Relief Valve Setting
-
4061.1 psi
-
Ripper - Pitch - Relief Valve Setting
-
4061.1 psi
-
Tank Capacity
-
32.2 gal (US)
-
Cylinder Sizing - Blade Lift - Bore
-
5.5 in
-
Cylinder Sizing - Blade Tilt - Bore
-
8.3 in
-
Cylinder Sizing - Ripper Shank Lift - Bore
-
8.3 in
-
Cylinder Sizing - Ripper Shank Angle - Bore
-
7.1 in
-
Cylinder Sizing - Blade Lift - Stroke
-
65.1 in
-
Cylinder Sizing - Blade Tilt - Stroke
-
9.5 in
-
Cylinder Sizing - Ripper Shank Lift - Stroke
-
21.1 in
-
Cylinder Sizing - Ripper Shank Angle - Stroke
-
26 in
-
Note (3)
-
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
