|
|
|
|
Engine |
Net Power - EEC 80/1269 |
535 HP |
- |
- |
Bore |
5.4 in |
4.1 in |
4.1 in |
Stroke |
6 in |
5 in |
5.3 in |
Note (1) |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
Note (3) |
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
- |
Power as declared per ISO 14396 |
Note (2) |
Optimized VHP Plus is standard for the 24. |
- |
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Standard Capability |
122 °F |
- |
109 °F |
Emissions |
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II |
Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards |
U.S. EPA Tier 4 Final/EU Stage V |
Note (4) |
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) |
- |
- |
Engine Model |
Cat C27 |
Cat® C4.4 |
Cat 7.1 |
Displacement |
1648 in³ |
268.5 in³ |
427.8 in³ |
Number of Cylinders |
12 |
- |
6 |
Net Power - ISO 9249/SAE J1349 |
- |
171 HP |
- |
Derating Altitude |
- |
9842 ft |
9842 ft |
Torque Rise - ISO 9294 |
- |
21% |
40% |
Maximum Torque |
- |
544 lb/ft |
- |
Engine Power AWD (ISO 14396) |
- |
128 kW |
196 HP |
Engine Power (ISO 14396) |
- |
- |
196 HP |
Engine RPM |
- |
- |
2,200 |
High - Ambient Capability |
- |
- |
122 °F |
Maximum Torque - ISO 9249 |
- |
- |
616 lb/ft |
Weights |
Operating Weight - Typically Equipped |
165314 lb |
14496 lb |
38912 lb |
Note |
- |
- |
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. |
Moldboard |
Blade Width |
24 ft |
12 ft |
12 ft |
Blade Height |
40 in |
20 in |
24 in |
Cutting Edge Width |
- |
6 in |
6 in |
Throat Clearance |
- |
4.7 in |
4.4 in |
Arc Radius |
- |
16.3 in |
16.3 in |
End Bit - Width |
- |
152 in |
- |
End Bit |
- |
- |
6 in |
Blade Range |
Maximum Depth of Cut |
21.7 in |
30.5 in |
28.1 in |
Maximum Lift Above Ground |
16.1 in |
16.1 in |
18.7 in |
Blade Tip Range - Backward |
- |
5° |
- |
Moldboard Sideshift - Right |
- |
26.1 in |
- |
Moldboard Sideshift - Left |
- |
20.2 in |
- |
Circle Centershift - Left |
- |
25.8 in |
- |
Blade Tip Range - Forward |
- |
40° |
- |
Circle Centershift - Right |
- |
25.8 in |
- |
Circle Center Shift Left |
- |
- |
29.6 in |
Circle Center Shift Right |
- |
- |
28.7 in |
Maximum Shoulder Reach Left |
- |
- |
74.3 in |
Maximum Shoulder Reach Right |
- |
- |
71.3 in |
Moldboard Side Shift Left |
- |
- |
25.6 in |
Moldboard Side Shift Right |
- |
- |
20.7 in |
Blade Tip Range Backward |
- |
- |
5 |
Blade Tip Range Forward |
- |
- |
40 |
Machine Weight |
Weight* |
161695 lb |
- |
- |
All-Wheel Drive (AWD) Weight |
- |
36376 lb |
- |
Dimensions |
Length of Machine* |
- |
391.4 in |
406.7 in |
Maximum Height |
- |
149.1 in |
132.4 in |
Width |
- |
94.6 in |
95.6 in |
Note |
- |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
Width All Wheel Drive (AWD) |
- |
- |
99.3 in |
Service Refill Capacities |
Cooling System |
- |
10.3 gal (US) |
40 l |
Circle Drive without Slip Clutch |
- |
0.4 gal (US) |
0.5 gal (US) |
Hydraulic System |
- |
14.5 gal (US) |
11.9 gal (US) |
Circle Drive with Slip Clutch |
- |
1.8 gal (US) |
2 gal (US) |
Transmission |
- |
4.5 gal (US) |
4.8 gal (US) |
Diesel Exhaust Fluid Tank (Tier 4 Only) |
- |
3.2 gal (US) |
4.2 gal (US) |
Fuel Tank |
- |
71 gal (US) |
78 gal (US) |
Engine Crankcase |
- |
2 gal (US) |
5.5 gal (US) |
Sustainability |
Recyclability |
- |
92% |
- |
Air Conditioning System |
Note |
- |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
Weight |
Weight (Tier 4 Final)** |
- |
- |
40488 lb |
All-wheel Drive Weight (AWD) (Tier 4 Final)** |
- |
- |
42119 lb |
All-Wheel Drive Weight (AWD) (Stage V)* |
- |
- |
40543 lb |
Weight (Stage V)* |
- |
- |
38912 lb |