Compare Equipment Go Back

24 Motor Grader

Engine

Net Power - EEC 80/1269 535 HP - -
Bore 5.4 in 4.1 in -
Stroke 6 in 5 in -
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, -
Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - -
Note (2) Optimized VHP Plus is standard for the 24. - -
Standard Capability 122 °F - -
Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards -
Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) - -
Engine Model Cat C27 Cat® C4.4 -
Displacement 1648 in³ 268.5 in³ -
Number of Cylinders 12 - -
Net Power - ISO 9249/SAE J1349 - 171 HP -
Derating Altitude - 9842 ft -
Torque Rise - ISO 9294 - 21% -
Maximum Torque - 544 lb/ft -
Engine Power AWD (ISO 14396) - 128 kW -

Machine Weight

Weight* 161695 lb - -
All-Wheel Drive (AWD) Weight - 36376 lb -

Weights

Operating Weight - Typically Equipped 165314 lb 14496 lb -

Moldboard

Blade Width 24 ft 12 ft -
Blade Height 40 in 20 in -
Cutting Edge Width - 6 in -
Throat Clearance - 4.7 in -
Arc Radius - 16.3 in -
End Bit - Width - 152 in -

Blade Range

Maximum Depth of Cut 21.7 in 30.5 in -
Maximum Lift Above Ground 16.1 in 16.1 in -
Blade Tip Range - Backward - -
Moldboard Sideshift - Right - 26.1 in -
Moldboard Sideshift - Left - 20.2 in -
Circle Centershift - Left - 25.8 in -
Blade Tip Range - Forward - 40° -
Circle Centershift - Right - 25.8 in -

Dimensions

Length of Machine* - 391.4 in -
Maximum Height - 149.1 in -
Width - 94.6 in -
Note - *Typically equipped with push block and ripper. -

Service Refill Capacities

Cooling System - 10.3 gal (US) -
Circle Drive without Slip Clutch - 0.4 gal (US) -
Hydraulic System - 14.5 gal (US) -
Circle Drive with Slip Clutch - 1.8 gal (US) -
Transmission - 4.5 gal (US) -
Diesel Exhaust Fluid Tank (Tier 4 Only) - 3.2 gal (US) -
Fuel Tank - 71 gal (US) -
Engine Crankcase - 2 gal (US) -

Sustainability

Recyclability - 92% -
Add a Similar Product: