|
|
|
|
Engine |
Net Power - EEC 80/1269 |
535 HP |
- |
250 HP |
Bore |
5.4 in |
4.1 in |
4.5 in |
Stroke |
6 in |
5 in |
5.9 in |
Note (1) |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, |
- |
Note (3) |
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
- |
- |
Note (2) |
Optimized VHP Plus is standard for the 24. |
- |
- |
Standard Capability |
122 °F |
- |
109 °F |
Emissions |
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II |
Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards |
U.S. EPA Tier 4 Final/EU Stage V |
Note (4) |
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) |
- |
- |
Engine Model |
Cat C27 |
Cat® C4.4 |
Cat C9.3 |
Displacement |
1648 in³ |
268.5 in³ |
567.5 in³ |
Number of Cylinders |
12 |
- |
6 |
Net Power - ISO 9249/SAE J1349 |
- |
171 HP |
250 HP |
Derating Altitude |
- |
9842 ft |
- |
Torque Rise - ISO 9294 |
- |
21% |
44% |
Maximum Torque |
- |
544 lb/ft |
- |
Engine Power AWD (ISO 14396) |
- |
128 kW |
- |
Engine RPM |
- |
- |
2,000 |
Weights |
Operating Weight - Typically Equipped |
165314 lb |
14496 lb |
20236 lb |
Moldboard |
Blade Width |
24 ft |
12 ft |
12 ft |
Blade Height |
40 in |
20 in |
- |
Cutting Edge Width |
- |
6 in |
- |
Throat Clearance |
- |
4.7 in |
6.5 in |
Arc Radius |
- |
16.3 in |
16.3 in |
End Bit - Width |
- |
152 in |
- |
Cutting Edge |
- |
- |
6 in |
End Bit |
- |
- |
6 in |
Blade Range |
Maximum Depth of Cut |
21.7 in |
30.5 in |
28.9 in |
Maximum Lift Above Ground |
16.1 in |
16.1 in |
18.9 in |
Blade Tip Range - Backward |
- |
5° |
- |
Moldboard Sideshift - Right |
- |
26.1 in |
- |
Moldboard Sideshift - Left |
- |
20.2 in |
- |
Circle Centershift - Left |
- |
25.8 in |
- |
Blade Tip Range - Forward |
- |
40° |
- |
Circle Centershift - Right |
- |
25.8 in |
- |
Machine Weight |
Weight* |
161695 lb |
- |
42325 lb |
All-Wheel Drive (AWD) Weight |
- |
36376 lb |
44613 lb |
Note |
- |
- |
*Typically equipped with push block and ripper. |
Dimensions |
Length of Machine* |
- |
391.4 in |
397.6 in |
Maximum Height |
- |
149.1 in |
132 in |
Width |
- |
94.6 in |
97.6 in |
Note |
- |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
Basic Blade Width |
- |
- |
140 in |
Service Refill Capacities |
Cooling System |
- |
10.3 gal (US) |
- |
Circle Drive without Slip Clutch |
- |
0.4 gal (US) |
- |
Hydraulic System |
- |
14.5 gal (US) |
- |
Circle Drive with Slip Clutch |
- |
1.8 gal (US) |
- |
Transmission |
- |
4.5 gal (US) |
- |
Diesel Exhaust Fluid Tank (Tier 4 Only) |
- |
3.2 gal (US) |
- |
Fuel Tank |
- |
71 gal (US) |
- |
Engine Crankcase |
- |
2 gal (US) |
- |
Sustainability |
Recyclability |
- |
92% |
- |
Service Refill |
Hydraulic System |
- |
- |
14.5 gal (US) |
Engine Crankcase |
- |
- |
7.9 gal (US) |
Circle Drive |
- |
- |
1.8 gal (US) |
Fuel Tank |
- |
- |
100 gal (US) |
Front Wheel Spindle Bearing - Each |
- |
- |
0.13 gal (US) |